Your cart is empty.
Your cart is empty.Product Description
2 MODELS HIGH BRIGHT LIGHT
LED BRAKE LIGHT
LED REVERSING LIGHT
-
IP67 Waterproof Rate
Ensure that the LED 3rd brake lights work perfectly in all weather.
-
High Quality LED Bulbs
With a whole LED light source and 18 built-in LEDs, it can indicate braking and reverse well.
-
Easy to Plug
Come with a plug-and-play mounting pattern and the factory screws make it easy to assemble.
-
Wide Range of Use
These lights are compatible with 2009 2010 2011 2012 2013 2014 Ford F150(Not Fit Raptor Models).
Compatible with 2009 2010 2011 2012 2013 2014 Ford F150(Not Fit Raptor Models)
RJL
Reviewed in the United States on January 6, 2025
This was a perfect fit for out Honda CRV. After watching a YouTube video it took us about 15 minutes to install. Highly recommend!!!
Jason
Reviewed in the United States on August 19, 2024
Bought and put in easily used a screw driver and installed, no water leaks. Great product-
Peter in WA
Reviewed in the United States on March 10, 2024
The other posts are correct. The supplied screws need to be better or just replace the bolt/screw 'reciever nuts'. It does take a bit to connect but you can do it. Just be patient. The lights, reverse and brave, are nice and bright. The dark lens gives my truck a very modern appearance. Get it and be cool like me!!
Michael J.
Reviewed in the United States on December 8, 2024
I’ve owned this brake light for 2 years with no issues. Light is pretty bright and the Fitment is perfect. Installation was very easy too!
Bill R.
Reviewed in Canada on August 4, 2023
Looks great and works well. Stopped water from leaking into the cab!
Abu Hatam
Reviewed in Saudi Arabia on July 25, 2023
مناسب جدا لا مشاكل تركيب سهل جدا
J-baby
Reviewed in the United States on October 10, 2023
I bought this because my factory light had begun to turn brown from water getting past the gasket. I saw this same one on someone else’s f150 and decided to buy it. There’s a difference though. Her truck was black. Mine is white. The issue of fitment is much more pronounced on my truck than on hers.So let’s get this out of the way. It doesn’t fit properly against the roof of the truck. At least the top of it. There’s a gap. The gasket properly fills that gap so there’s no leaks, even through an automatic car wash, but since mine is a single cab 2 wheel drive, it’s noticeable to me. If it were a lifted 4x4 I wouldn’t notice it.The brake light itself, I don’t know how bright it really is during use, I can only see what it looks like on my security cameras as I’m leaving my house, and it looks decent. I will say I was rear ended last week. I can neither confirm nor deny that this was the culprit.The cargo lamp sucks. Its useless. I have an 8’ bed, and it shines only on the last two feet of the bed. If I had a 6’ bed it would miss the bed completely. It plugs into one of the cargo lamp plug sockets so here’s another issue with it, it stays dimly lit for a few minutes after the cargo lamp turns off. I don’t know why.Another issue, the provided bolts. Don’t use them. They won’t work. You’ll have to use your factory bolts. It took me probably half an hour to get one of the bolts out of this light because they were secured in there with nuts for some reason, and it would not thread out for the longest time. After working it over and over eventually it rethreaded itself and was able to come out. Irritating.Long story short, when I get around to it I’ll be buying a replacement, but it won’t be this one.
Doug the woodworker
Reviewed in the United States on March 21, 2021
Nice upgrade/repair. As others have said, the stock light leaks and looks ugly dirty. This is brighter and I like the look better. Also, as others have said, it doesn't sit flush. It looks fine, though. It has a good seal. Easy to install. Just unplug the existing bulbs and plug in the right and center (as you are facing the light) plugs. The third, unnecessary plug screws in a non functional hole and all is neat and tidy. Nice part that doesn't cost the $70 that the stock part costs.
Ian and Heather Gorbell
Reviewed in Canada on April 3, 2021
Looks awesome, easy install but as others have said sticks out more than factory but I still like the look.
Stephanie Chapman
Reviewed in the United States on May 23, 2020
I received the package and it was in fine shape with the product inside wrapped up in bubble wrap with the lens covered in shrink wrap. Very nice and protected. I gave this an overall 4 star review simply for the fact that there were no instructions. There were two simple rubber washers? That I did not end up doing anything with for the install.However, everything is straight forward and simple. Remove the old lamp/housing, detach the factory bulbs, and plug in the new LED squares and boom! You’re almost home. Once re-installing the housing with the factory screws you are done with it. Just be sure not to over-tighten as you may crack the plastic housing on your new product. A tip, I used a black sharpie on the old factory screws to black out everything, so we’ll see how this hold’s up versus spray painting the screw heads.Lastly, I really like the new piece on my F-150 as I continue to black out all the emblems, logos, light housings, etc. The only thing about this product is that it does NOT sit flush against your cab. It does protrude slightly about…1/4” of an inch or so, but it provides a nice sealed attachment. Hope this all helps.
Joel
Reviewed in Canada on December 18, 2020
Very easy to install and works great
Customer
Reviewed in Canada on October 17, 2020
Fixed the leaking 3rd brake light issue. It's got a very thick gasket and sticks out more than stock but it's really not noticable. No longer have to worry about leaking.Only negative, the connector is very cheap but has worked so far.
Octane
Reviewed in the United States on November 16, 2019
Looks nice. 2014 f150 XLT.Gasket is thicker but makes for a nice seal when light is screwed in. I used clear silicone gasket around gasket on light edge and as I tightened the OEM screws the excess silicone seeped out. I know I wont have any issues with leaking. Also i used the same silicone for the screw holes to create a gasket there too. You can kinda tell but u have to b looking for it and right up on it.This is plug and play. All u need to do is take old bulbs out and used the harness provided to insert and your good. Extra spot for the 3rd light to void into empty slot.Cabin light has white light. Brake displays white and red. Haven't used reverse yet but care less for that since I have actual reverse tail lights.Overall happy.
Recommended Products
$199.00
$ 78 .99 $78.99