Your cart is empty.
Your cart is empty.
Quality
The tool is machined a few thousands more due to the GM shifter shaft has a high spot on shaft near where GM formed threads -Steel construction Kit includes Seal This tool is mandatory to remove the leaky seal around the shifter selector shaft mechanism through the transmission case.
Function
This handy tool will let you remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission.
The tool goes over the shaft, threads onto the leaky seal (counterclockwise) engaging the seal with the tool LH threads, then with the hex bolt turned the seal is efficiently removed intact.
The new seal is put over the shifter shaft and with the dowel tool pushed into place completing the installation.
Fitment
GM 200, 200C, 200-4R TURBO 350, 350C TURBO 400, 425, 475 GM 700-R4 GM 4L60 GM Allison - 540 In most cases this tool can be used without lowering the transmission or removing the transmission pan.
J W D
Reviewed in the United States on September 17, 2024
Worked flawless
Caleb M Fritz
Reviewed in the United States on March 4, 2024
Don’t waste your money. This manufacturer is incapable of drilling the removal tool to fit over the shaft; Yet the installation tool and seal fits 🙄 Maybe there’s something else I don’t know but I do know my th350 is a 79 model year with the original shifter.
Hasse Carlsson
Reviewed in the United States on March 13, 2024
Didn't fit. Did not fit, the hole was to small. Had to enlarge the hole to be able to slide it over the shaft.
Sundowner
Reviewed in the United States on March 10, 2024
It all seems to be there have not used it yet live in Montana it's been winter forever.
Customer
Reviewed in the United Kingdom on December 30, 2024
Perfect fit for the job no leaks quality part
Vickie Roth
Reviewed in the United States on August 11, 2023
This tool is supposed to work on a GM Turbo 400 transmission. It is supposed to fit over the shift shaft to remove the seal. It was slightly too small. The shaft is 1/2”’in diameter. I tried a 1/2” drill bit and it wouldn’t fit either.
Happy
Reviewed in Canada on May 10, 2023
Extraction tool does not fit over the shifter shaftIf you don;t have a 9/16 drill bit don't waste your time, the drill bit cost more than the tooI .I would have returnthe item but did not get around to using the tool iuntil now.
Aaron Padillas
Reviewed in Canada on February 20, 2023
I had to open the bore of extracting tool using my lathe
Chris
Reviewed in the United States on December 8, 2023
Item would not fit over the shift shaft, of no use do not buy this item. I am going to return them. Poor Poor
Brian S.
Reviewed in the United States on November 5, 2023
Pulling tool wouldn’t fit over shaft, had to enlarge the hole but it would never bite into the seal. Since I tried to fix the tool, I can’t return it.
Customer
Reviewed in the United States on September 20, 2022
The end of the tool with the external thread had burrs in the ID. Would not fit over the shifter shaft without first grinding the burrs out. After doing that it worked as described.
Teena
Reviewed in Canada on September 15, 2022
This tool required modification to fit on the shift shaft because it was too tight. We did this by machining out the inside so it would fit on the shift shaft, then it worked pretty slick. If you don't have the means to modify the tool, don't buy it.
Marc
Reviewed in Canada on November 16, 2022
As others have said, the inside diameter is too small to fit over the shift shaft. Both the removal tool and install tool were too tight. Had to drill out the i.d. of the removal tool and just used a thin wall socket to install.Removal tool and installer would have been 5 stars if they were correctly sized.
Recommended Products
$108.77
$ 51 .99 $51.99
$27.99
$ 13 .99 $13.99