Your cart is empty.
Your cart is empty. Features
1.Official Raspberry Pi 5 Active Cooler -- This is Official Raspberry Pi Active Cooler for the latest Raspberry Pi 5 4GB/8GB Board
2. Composition--The Raspberry Pi 5 Active Cooler is composed of Temperature-controlled Blower Fan and Aluminium Heatsink and comes with Thermal Tapes to accelerate heat dissipation
3. Input voltage--5V DC (supplied via four-pin fan header on Raspberry Pi 5)
4. NOTE - Raspberry Pi 5 Board is NOT Included
Specifications
Input voltage-- 5V DC (supplied via four-pin fan header on Raspberry Pi 5)
Fan speed control -- Pulse width modulation control with tachometer
Maximum airflow -- 1.09 CFM
Maximum Fan speed -- 8000 RPM ±15%
Material-- Anodised aluminium
How to Install
Connect the 4pin cable to the fan header on Raspberry Pi 5, and fix the Active Cooler via spring-loaded push pins
Package Content
Raspberry Pi 5 Official Active Cooler x1
Clark Roush
Reviewed in the United States on March 3, 2025
Fit like a glove & it keeping my PI5 cool
Jorge Marchini
Reviewed in the United States on February 18, 2025
Práctico y silencioso
Russell Labs
Reviewed in the United States on January 13, 2025
I got a passive cooler with my Pi5, so when I got the 26TOPs AI Kit, I had to go Active Cooling. This was easy to install and works great. If you are looking at dabbling with the AI Hat Kit this is a must have.
龙猫
Reviewed in the United States on September 22, 2024
This works great. It will automatically adjust to increased temperatures or you can manually turn it on or off with the following commands:Disable the fan:pinctrl FAN_PWM op dh100% fan speed:pinctrl FAN_PWM op dlLet the firmware automatically control the fan again:pinctrl FAN_PWM a0Sometimes it would have problems with starting the fan, but I think the main reason is that I was using the wrong power supply. Make sure that it is at least 27 watts.
Another Bored Consumer
Reviewed in Canada on May 3, 2024
It works out of box with a RaspPi 5, which is needed. The Pi5 will overheat, especially with passive cooling, so this little cooler is thin and simple, but improves overall performance.I 3D printed a few Pi5 cases, and this cooler fits perfectly in all of them, I must applaud the Pi foundation and the community of 3D printers/modelers to make the designs so fast. Not only does this cooler reduce temps of the Pi5, but it also cools down the SSD, especially if a NVME is used. The cooler covers it.This uses push pins, which I dislike, but in this situation it works for the Pi5 since it does not require too much pressure either.
H2O
Reviewed in Canada on May 12, 2024
As the Pi system gets more powerful and the projects get doing more complex work, there is an increasing need to have cooling for your system. As an official active cooler system for Raspberry Pi 5, this fits great and works great. It is ready to be installed with its cable and thermal tapes. It blows away the heat well. It is also quite silent too, but we will have to see how the silent work will stand the test of time. Overall, a great addition to your Pi 5 system.
alex
Reviewed in the United States on December 9, 2024
Great product! Ran silverbench CPU stress test while streaming a 1080 video with a half dozen tabs open to get the CPU usage up around 90% for a sustained period! 76c pwm controlled fan came on and brought it down to a steady 67c! Im adding a quad M.2 slot HAT so i can run 2 NMVe and 2 Halio AI modules!
I buy a lot
Reviewed in the United States on October 6, 2024
I was worried that I would run into interference with stacked boards. No issues, I am happy with my purchase.
"makfu"
Reviewed in the United States on October 26, 2024
I had been running the Ice Tower, which definitely will average about 10c lower than this cooler, but this official Pi cooler has the advantage of providing VRM cooling and better case compatibility. It also keeps the Pi5 well below throttling temps, even when all cores and the GPU is fully loaded.That said, something like the Ice Tower (especially the newer revised version with VRM and chipset cooling) is a better choice if pushing overclocking with over-volting. This cooler doesn’t have enough mass or dissipation area to keep a heavily OC’d Pi 5 below throttling temps, in my experience. It’s also not nearly as quiet as the Ice Tower, which is virtually silent, whereas this cooler’s much smaller fan becomes quite noticeable once the fan curve hits it max, at around 75c.Overall it’s a good cooler, and a good default choice, but if maximum cooling, or near silent active cooling is desired, there are better options.
Robert Barnes
Reviewed in the United States on October 15, 2024
This cooler is a must-have for anyone pushing their Raspberry Pi 5, especially with the AI board! I was running some intensive machine learning models and my Pi was getting toasty. This cooler snapped on easily and immediately made a difference. Temperatures dropped significantly, and the fan noise is barely noticeable, even under heavy load.It works perfectly in conjunction with the Raspberry Pi 5 AI board, keeping both components running cool. My only gripe is that finding a case to accommodate both the cooler and the AI board stacked together is proving to be a challenge. Hopefully, case manufacturers will catch up soon and offer more options.Despite the case compatibility issue, this cooler is essential for demanding applications on the Raspberry Pi 5. Highly recommended!
OnlineHousehold
Reviewed in Canada on April 23, 2024
Very happy with this official active cooler for my Pi 5. Combined with a hat for NVME inside a case, it keeps everything cool and working optimally. Assembles easily -- it just works! No substitute for the official product -- this is a great value and highly recommended.
Recommended Products
