Shopping Cart

Your cart is empty.

Your cart is empty.

Front Disc Hydraulic Brake Master Cylinder Caliper Assembly with 190mm Front Disc Brake Plate Replacement and Brake Pads for 50cc 70cc 90cc SSR 110cc Atomik SSR Chinese Dirt Bike Pit Bike

4.3 (9) Write Review
Free shipping on orders over $29.99

$30.99

$ 15 .99 $15.99

In Stock
  • 【Wide Applicability】Our Master cylinder / Brake Lever fits 7/8-inch (22mm) diameter handlebar, compatible with 50cc, 70cc, 90cc, 110cc, and 125cc dirt bike, pit bike, ATV, UTV and other disc brake assemblies. It's compatible with a 1.77" caliper mounting hole center distance for M8 type mounting bolt.(190mm brake rotor).
  • 【Precision Machined high Rotor】Heat hardened surface treatment resists corrosion and abrasion. Engineered with precise location and quantity of ventilation holes to provide optimal cooling to prevent warping and cracking. Our Brake Disc Rotor mounting holes measure 10mm in diameter and the eye to eye is 100mm, inner Diameter: 76mm. You can measure the diameter of the mounting holes of the original rotor on your vehicle and confirm.
  • 【Longer Lasting】High metal content brake pads offer superior performance in wet or dry conditions. Brake pads with 15,000km service life. Also, the 4.33" stainless steel braided aviation brake hose is more durable than its rubber counterparts.
  • 【No Leaking Or Dripping Oils】The double-layer heatproof nitrile rubber seal stands well against damage caused by extreme temperatures, heat, and oil. M10 oiling screw cap is included. Banjo Bolt Size: M10X1.25 (Thread diameter: 10mm, pitch: 1.25mm)
  • 【Bolt On And Go】Our brake assembly is pre-bleeding. Dual floating calipers always provides strong and consistent grip from both sides of the disc for better, more responsive, smooth braking force. Ride with peace of mind with the Front Disc Brake Assembly with Master Cylinder, Caliper & Brake Pads.


Product Description

Legal Disclaimer：

This item is an aftermarket replacement product/spare parts, not a licensed genuine product. We do not claim ownership and have no affiliation with Apollo,Thumpstar,Honda,CF. All copyrights belong to the respective owners. Unless specifically identified as such, our use of third party does not indicate any relationship, sponsorship, or endorsement between us and Apollo,Thumpstar,Honda,CF. Any references by us (or company name) (or the seller) to third party is to identify the corresponding third party's goods and shall be considered nominative fair use under the law.

brake assembly

Not getting enough braking power from your current system?

Brakes are essential for any vehicle, especially dirt bikes. Without a reliable braking system, you could end up in accidents that can put your life in danger. But reliability is just one part of the equation when it comes to choosing a brake system. You'll also want something that's long-lasting so you can get your money's worth.

Ride with peace of mind with the WEIYINGSI Front Disc Brake Assembly with Master Cylinder, Caliper & Brake Pads.

Here are more details about our rear brake kit

- Pre-emptied and ready to instal

- Friction disc has 15000 kms. service life

- Sensitive brake switch with usage life of 100,000 times

- 10mm thread diameter and 1.25 pitch banjo bolt

Note Please: Front and Rear rotors are with opposit wave directions, don't mix them.

Master cylinder Brake Lever

Size：

Master cylinder Hole Distance: 7/8-inch (22mm)

Brake Tubing Length: 4.33 inch (110mm)

Brake Caliper Mounting Hole Distance: 1.77 inch (45mm)

Brake Caliper Install Hole Diameter: 0.31 inch (8mm)

Front Brake Disc Hole Distance: 3.94 inch (100mm)

Front Brake Disc Internal diameter: 2.99 inch (76mm)

Front brake disc mounting hole diameter: 0.39 inch (10mm)

Package Contents：

1 x handlebar mount master cylinder

1 x caliper

1 x braided brake line

1 x front brake disc

2 x extra brake pads

4 x zip ties,

1 x fuel filter with paper element and magnet,

1 x right brake switch,

1 x brake switch mount bolt.

brake pads

Krystal
Reviewed in the United States on September 26, 2024
The description says it fits all of them including the 250. It does not. So instead of send this hunk of crap back I ended up using the brake handle and then trashing the rest. The brake cable did not reach between the handle and the tire. Such crap
wayne
Reviewed in the United States on March 7, 2024
im not personally one to complain about things (especially things for parts for a chinese scooter that seems to made out of chinasium or pressed tin foil) cause most of the time i take all of that out and get parts for them that arent going to fall appart and of explode for no reason but enough about me....heres whats wrong with this product that you should know before buying this1. the rotors are 4 bolt most tao tao 50 pony scooters(also known as atm ) have 3 bolt rotors so no they will not fit despite the description says "will fit a 50 cc scooter" yes they can? but you would need a custom wheel to make them work2. the pistons on the calipers are rather small for something thats made to stop a scooter that can hit almost 70 to 80 mph3.THE ACTUAL PADS are very thinmy advice? if you have a 50 cc atm tao tao pony etc dont bother buying this
olivier laurent
Reviewed in France on December 29, 2024
Montage sur chappy chinois au top
Panda
Reviewed in the United States on April 1, 2024
Easy install pre-bled brakes
Simon Says
Reviewed in the United States on September 13, 2023
Fit my 125cc bike. Complete set of breaks with easy assembling. Perform like the original.
Borgo 10
Reviewed in France on August 21, 2023
J’ai acheté l’ensemble suite à un problème sur le maître cylindre de la dirt à mon fils, j’ai opté pour le kit complet, c’est vraiment top car il n’y a rien à faire. Tout est inclu.On installe et on profite directement
Johnny M.
Reviewed in the United States on July 31, 2023
Fits like they should work light they should. 2013 coolster pit bike 125cc
Abril
Reviewed in the United States on July 14, 2023
exelente
nmb-mom2three
Reviewed in the United States on July 10, 2023
perfect fitment for my project