Your cart is empty.
Your cart is empty. Fit models:
Compatible with: CRF50 or XR50
Forks Suspension Shocks:
Upper fork diameter: 27mm(1.06")
Spindle hole size: 12mm(0.47")
Length: 520mm (from leg top to wheel axle centre)
Triple Clamp Handlebar Riser Set:
Centre Pole: 260mm
Bolt distance: 150mm
Top clamp: 10mm
bottom clamp: 27mm
Package Includes:
A pair of forks suspension shocks + triple clamp handlebar riser set
Shane struss
Reviewed in the United States on March 13, 2025
Descent for the price range need maintenance after bought though. Super springy
Blair Weiss
Reviewed in the United States on September 18, 2024
Overall happy with the price point. Shipped quickly, but was concerned there would be missing parts even though it was a box in a box, inner box was shredded… but everything was there. I did a quick mock up and then figured out what I needed to make / modify. I ended up making the brake cable bracket ( included a sketch in photo) and drilling the lower triple for bar stops.I was questioning wether there was fluid in them, the top doesn’t come off like regular forks, you remove the socket head cap screw from the bottom of the leg.. and sure enough, there “was” fluid in there until I spilled it on the floor. I have to pick up some thicker fluid.Overall very happy.
Ryan
Reviewed in the United States on August 9, 2024
Fits well on a CRF 50 with a longer rear shock. Does not include a brake bracket you will need to fabricate one, and will require a longer 12mm axle. Front fender also must be drilled to attach to lower triple. Oil level in forks was under filled and they had no damping. After adding 50cc of 15w fork oil to each leg they ride much better. For the price point it is a good upgrade from the stock forks I had w/ longer chromoly legs and HD springs/bushings. These look to be very similar to the stock forks on an SSR 50.
Bri call
Reviewed in the United States on August 18, 2024
Perfect for a small rider But if you were an adult, then put stiffer fluid in it.The box that it ships in is horrible. It’s literally Chinese newspaper, I bought one and it came damaged Exchanged it out got one that wasn’t damaged.You have to buy a longer axle (205mm) to fit an oem Xr / crf 50 wheel,you need to make a bracket for the brake cable out of some angle iron (pictured) use the bolt for cable mounting to secure it to the forkhandlebar mounts Screws strip out very easily so be careful when tighteninguse the OEM bearings and stem bolts because the ones in this kit are junkIt also makes the bike sit tallerStock bars will not fitStock plastics don’t fit, requires smaller screws and to drill new holesSteering stops don’t line up perfect so you can turn the wheel like 70 degrees
Customer
Reviewed in the United States on August 10, 2024
Everything looks good so far only problem was that the bearings that came with it were trashed and you'll need a longer axle for the 04 crf50 to be able to install the front wheel
Kevin Fervida
Reviewed in the United States on October 1, 2024
Forks bolt right up to xr50. Had to make a bracket for the front breaks, drilled new holes in the front fender, and number plate. They are super stiff I am 165lbs and they won’t budge
Recommended Products
$31.95
$ 16 .99 $16.99