Your cart is empty.
Your cart is empty.Product Description
Applicable Models:
Replacement for GM
Replacement for For-d 1964-1973
Specification:
Adjustable Master Cylinder Push rod Kit
Universal Adjustable Push Rod
5/8 Eyelet
Max length is 7.5" Shortest Length is 7" with out modification.
Threaded rot can be cut to length to 5 1/8" for shortest length.
We have been tested many times before sales to ensure the safety, stability and durability.
Kevinjd21
Reviewed in the United States on September 30, 2024
I replaced my master cylinder and upgrading drum brakes to all disc . Pedal felt not 100% after properly bleeding the system. It had power brake push rod in it so I replace it with this . I did have to cut both threaded rods down and the square end that engages brake switch I had to grind that down to fit my application .
Kody
Reviewed in the United States on December 4, 2024
I used this to do a manual brake conversion on a 86 chevy s10 i had to find a bushing for the ot hole to attach it to the pedal it should come with another jam nut to lock in the adjustment other than not coming with two nuts it's good
Brian
Reviewed in the United States on September 22, 2023
Couldn't use because rod end too thick brake lights always on.
Bill
Reviewed in the United States on September 21, 2023
Universal kit that I had to cut to size. Worked Great!
JR
Reviewed in the United States on August 14, 2023
Did not work as stated
BSbuyingBS
Reviewed in the United States on July 10, 2023
Product got the job done with welding and grinding on mine end. Needed a pushrod for a power bread setup. Cut the loop end of this one and welded the pieces together. Probably could have used a long grade 8 bolt and accomplished the same but felt better using a piece designed for his purpose.
Recommended Products