Your cart is empty.

FYSETC Prusa i3 MK3S MK4 H1H Build Plate - Rainbow Streak Phantom Spring Steel Sheet - 254X241mm Print Bed: Double Sided Smooth Colorful Bedplate Upgrade for MK2 MK2.5S MK52 MK3 MK3S+MK3.9 3D Printer

4.3 (1) Write Review

Free shipping on orders over $29.99

$19.89

$ 8 .99 $8.99

In Stock

Qty.:

1. Upgraded Prusa Bed for Original MK4: The plate comes with a different hologram design on each side. One side is a Light beam pattern, which dances in the space like neon-like light strips, vividly displaying natural colors and light with its soft arcs. Another side is a phantom style, which seems to be a subtle fusion of reality and dream, creating a fascinating illusion and stunning look. The pattern that gets transferred is very cool, smooth and pretty. Good adhesion. Clean smooth finish.
2. Great adhesion for first printing layer: An appropriate Z value is VERY important. Adjusting Z value -0.930 or -0.945 on Prusa i3 MK3S+, no glue stick or tape or hairsprayy. If print head nozzle too low, filament buildup or no extrusion on print surface, easily scratch the bed. If too high, prints come off the printbed, messing thing up. Turn OFF the cooling fan and Slow down the print speed when going on the first few layers. A clean surface, a dry filament or adding Brims also work.
3. MK4 Prusa Build Plate Attention: Given the fragile nature of the surface, it's necessary to keep it stored Separately for protection when not in use to avoid getting scratched. But, if treated well and used on a well-tuned printer, it should provide a great number of amazing looking prints. YES, this plate easily shows contamination from fingerprints and the like, the holograms disappear wherever youve left a deposit. So recommend to wear gloves Or Clean it with alcoholl before printing.
4. Very fun upgrade for your printer: Holographic build plate Prusa heated bed cover, the MK3.9/MK4 load cell based system works well on the sheet. The H1H print bed surface is resistant to high temperature 200°C. After extensive testing, we recommend H1H to print PLA/TPU/PETG. If you want to print other filaments, please adjust the parameters. A great printbed for PLA print that could use a nice design other than the usual frosted textured PEI sheets. Easily remove the 3d printing project.
5. Awesome Textures, Cool Effect: This build plate is pretty awesome. You get the best results with a dark colored PLA PETG. The designs imprint quite nicely on the parts, for decorative pieces, it give a nice extra bit of eye candy. For any prints that expose the bottom print area this bed makes a difference. The adhesion is decent, not to the adhesion of a PEI smooth sheet but the parts still stick well, make sure your printer is tuned very well first. Both sides magent and work properly.

Product Description

Upgraded H1H Build Plate: This is a very cool holographic plate for Prusa i3 MK3 MK3S MK4 printer heatbed.

Double Side: rainbow streak and phantom patterns

One side is a Light beam pattern, which dances in the space like neon-like light strips, vividly displaying natural colors and light with its soft arcs. Another side is a phantom style, which seems to be a subtle fusion of reality and dream, creating a fascinating illusion and stunning look. The pattern that gets transferred is very cool, smooth and pretty. Good adhesion. Clean smooth finish. double sided printing, makes your creativity run wild.

Spring Steel Build Plate 254x241mm

*Due to its Smooth Beauty features, honestly, it's very easy to catch fingerprints or dust on. It's better to use a clean, quality microfiber cloth to wipe the print surface after installing onto the hot bed. Also, you can wear a pair of nitrile blend gloves to avoid the fingerprints on.

*But the build plate perfectly fits MK3s original MK4 and dont' have any issues with adhesion. The holographic designs that ends up showing on the prints is great and adds a bit of character to the bottom.

1. The pattern transferred is very amazing.

2. About the challenge of achieving a good first layer adhesion, some tips FYI:

* Recommend teperature for 3d printing materials: PLA: 50-65, PETG: 70-80, TPU: 60-70 degrees Celsius, not recommend print high-temp ABS.

* The first layer gap between nozzle and the print platform should be about 0.05-0.2mm to ensure that the filament can adhere well on the printing surface.

* *The most important, Slow down the speed of the first several layers to 10-25mm/s, we print the first layer on this surface without speed up, just 100% as the machine's basic speed, and meanwhile, turn off the print fan when going on the first 1-3 layers.

** *Setting an appropriate Z value is VERY necessary for a successful bed adhesion. Our Z adjusting value is -0.930, it's OK.

* Adding some brims for a small touching area works.

Effortless Removal: After the prints and the plate are cool, flex your plate to pop the prints off. Never to remove the model while the plate and the model are still warm. To speed up cooldown process, take the spring steel sheet (with model) off from your printer.

Zach

Reviewed in the United States on February 12, 2025

It works just keep it super clean