Your cart is empty.
Your cart is empty.Next generation bearings, designed for today's skateboarding g3's. Deep Groove raceways BALLS roll deep in Raceway channels reduces side impact damage & breakage. Straight edge frictionless shields POP off resistant holds oil in, dirt and moisture out easy to clean. Micro Groove Raceway surfaces linear microgroove surfaces improve bearing lubrication, speed and spin. Max impact cage design non distortion custom cage keeps the BALLS precision spaced & oil circulating. Balls out technology eliminates Shield and cage contact on impact for a go fast, stay fast bearing. High speed ceramic oil Nano ceramic compounds for wear protection moisture, rust, corrosion resistant. Factory fresh quality nitrogen filled shrink wrap, reduces metal & oil oxidation until ready to be ridden.
Andrea Vitiello
Reviewed in Italy on January 25, 2025
Vanno una bomba
Connor Cullen
Reviewed in the United Kingdom on September 21, 2024
Decided to take a chance on these after hearing good things from other skaters, was not disappointed! Smooth rolling and great quality, I'm pretty heavy and these things have handled some proper abuse and are still going strong! The metal tin they come in is ideal for my spare hardware, and they come with the internal bearing spacers and axle washers too which is a nice touch! Will definitely be running these again on my other setups!
Brayan Gutierrez
Reviewed in the United States on March 27, 2024
I recently installed Bronson G3 bearings on my Razor A6 scooter and I am extremely impressed with the difference they have made. The smooth and efficient roll of these bearings has greatly enhanced my riding experience.The installation process was straightforward and the bearings fit perfectly on my scooter. Once I hit the pavement, I immediately noticed the improved speed and precision of the G3 bearings. They have definitely elevated the overall performance of my scooter.I appreciate the high-quality construction of the Bronson G3 bearings and their durability. They have shown no signs of wear and tear even after multiple rides. I can confidently say that these bearings are built to last.Overall, I am thoroughly satisfied with the Bronson G3 bearings and would highly recommend them to anyone looking to upgrade their scooter. It’s always a great feeling to invest in a product that delivers on its promises, and these bearings have definitely exceeded my expectations.
Asalange9
Reviewed in the United States on December 2, 2024
Smooth and quiet with very good dust shields and I don’t need to clean them as much as my old reds. They spin for longer than my old reds too and after I added speed cream they were even faster.
ROLAND BURKET
Reviewed in the United States on December 12, 2024
I like these bearings because they weren’t very expensive and it was a nice upgrade over stock. I did a wheel spin on the stock bearings and the front wheel spun for 2minutes 15 seconds. After replacing them i did it again and the front wheel spun for over 10 minutes. I kno Nothing scientific but i can see the difference. And didn’t have to spend too much
Keenen
Reviewed in the United States on January 9, 2024
These are some of the FASTEST bearings I've ever skated with. I did not use the bearing spacers they came with however. I tried them on first setup, but then removed the spacers after about an hour while at the park. They just make the skateboard sound, not like a skateboard. But the bearings themselves you will not be disappointed with. I would trust anything made by Bronson based on these bearings.
Carlos
Reviewed in the United States on July 9, 2023
I'm just gonna jump right out of the box and say that these bearings are quite literally amazing. The bang for your buck is just incredible. I just switched my 2 month old Reds for these, and I noticed such an immediate difference.When I swapped out my Reds for these, I noticed that some of my Reds bearings were not even spinning right anymore, and that was just after roughly 2 months of use. And that's not even 2 months of skating everyday, but I digress.Back to these Bronsons: I noticed when I was skating my local streets, I exerted less energy pushing off with my feet, as well as taking less pushes to achieve the desired speed I wanted. I appreciated this so much because my city is very hilly, and climbing back up hills was kind of a drag, especially after being tired. They also feel so smooth to skate on, and honestly feel like they keep getting faster the more I use them. Keep in mind I've only owned these for 2 days so far, but I've probably already put about 10-12 hours into them.Skating at my local skate park was also a night and day difference. I noticed I was getting a ton more speed going up inclines with little effort, whereas for my Reds, I would have to push twice or even three times as hard. I just want to add, I had a really killer session at the park today, and I attribute it to these bad boys.All in all, I have been converted and am a true believer in Bronson G3s, and any other Bronson product for that matter! Like I said earlier, the bang for your buck easily gives these bearings a 5-star rating. But they also have a smooth and fast ride that can probably compete with bearings double the price.I'll try to make an update review after 2 months and see how they hold up, but I have a gut feeling that all of these bearings with still be spinning, unlike my Reds smh >:(Thanks for reading my review and I hope you found it helpful!
Atharva Kulkarni
Reviewed in India on March 20, 2023
The pack I received was used already,and all the bearings were damaged in it
yoh
Reviewed in the United States on June 29, 2022
Picked up a few sets as a local pro highly reccommended them as a cheap alternative to Swiss bearings. They are comparable to Super Redz but not Swiss. Definitely better than regular Redz. My kids and I all felt they were quiet, just not fast.
Jeffrey
Reviewed in the United States on May 14, 2022
I have tested, Bones Reds, Red Race, Bronson Raw, Bronson G3, and Zelous bearings. I noticed a huge speed difference using the G3. My first ride with them were incredible. I was having fun cruising on these. They roll further and go fast! Zelous are good but they are more heavy duty for riders that go through harsh conditions and mountain ride. They are the slowest for flat surfing. For absolute speed and roll time, Bronson always comes out on top. The Raws are the fastest out of everyone for flat surfing. But they are prone to getting dirt and slowing down over time.Top 3 bearings list: 1.G3 2. RAW 3. Zelous.G3's come out on top because they have fantastic roll speed and roll time. They are the compromise of speed and durability. They aren't as quite fast as the RAWS but they are almost there! They are faster than Bones Reds and I don't wanna pay for ceramics. (I'm a cruiser dude) skate for transportation.
Jer
Reviewed in Canada on April 8, 2021
Really nice quality. I changed out some older, but still in decent condition bearings to these. There was an immediate, noticeable difference from the stock bearings. Very satisfied.
bernd
Reviewed in Germany on September 18, 2019
endlich mal ein besseres lager für schwerere fahrer geeignet und nicht nach 2-5mal skaten schon viel spiel und bremst beim landen gefühle - hält bei mir (90kg) bei zweimal die Woche 1-3h dauerbenutzung pro tag fast den ganzen sommer - fast wie früher als man noch nix wusste nix konnte und keine ansprüche hatte außer abfahrt. die rollen mal richtig die lager und halten ne weile. sollten sich andere Hersteller mal ein Beispiel dran nehmen. übelster gegativ vergleich bei erstmal geilen aber nicht lange haltbaren lagern wäre Amphetamin ceramics - fürs doppelte geld rollen die Bronson G3 gleichgut und mindestens 10 mal weiter bei entsprechender Belastung. bin sehr zufrieden. mehr solche Projekte für den markt bitte.
HeadNtheClouds
Reviewed in the United States on January 12, 2019
I had a gift card so I bought another set of these even though my old G3’s of almost 2 years are still awesome. I am a skate freak & love these bearings, they are fast, smooth and strong & what I love the best is their shields actually go all the way to the inner race to keep that sand & dirt out. Less maintenance & have not had even 1 wrecked bearing in2 years after many miles of beach skating. I have them in my inline skates & they are dependable & are not going to break like cheap bearings. The cage is stronger & doesn’t have any rough edges, which would snag on the inner or outer race. I found these to be the best bearings I have ever had, and that is including expensive Swiss (they didn’t have adequate shielding & sand got in the holes by the inner race. I hope this helps someone. I have been through a lot of money and headaches trying to keep the sand out. I would also like to try those Fireball Dragon Bearings for their labyrinth shields & inner race design & price point, but I chose these first.
Recommended Products
