I used it on badminton racket. I've been using it for a few months and it works fine without any problems.

An allen set screw is missing. I need one to secure the winder bar.

I should’ve went for the crank mechanism instead…… the drop weight system, is far from accurate for tensioning….besides that I’m enjoying it….

This is the best stringer I’ve ever used. Very easy to work with and allows me to accurately string a racket. A little on the expensive side but it’s worth it. Durable and doesn’t weight a lot so transport would be easy.

I'm a club tennis player at the 4.0 level and my wife and son also play a lot of tennis (all 3 of us play competitive league matches in our area). Having my own home tennis stringing machine was something I always thought of getting, so that I could tinker with different strings. This drop weight machine is very easy to setup and use. There's lot of great online videos showing you how to proper use this type of machine to string a racquet. The 6 point turning tabletop is highly recommended to avoid distortion to the head, which can happen on a 2 point mount system. The drop weight mechanism is quite accurate when I used a tension gauge to test it for calibration. Key to getting the right tension is to be patient and don't force down the drop weight as you could overly stretch out and damage the string. The turn knob mechanism does cause a slight kink in the string especially stiffer poly strings, so if that bothers you then you may need to look elsewhere for a constant pull or electronic pull machine, which is much pricier. For me I didn't notice any change in the playability of the strings in anyway. The 2 included floating clamps work ok to keep string tension, but I do add 10% tension before tieoff. I also use a separate starting clamp for both my mains and crosses to ensure better tension maintenance. The other included tools are useful, especially the awl which is handy when you already have one string thru a grommet and need to feed in a second string to tie it off. Overall a great beginner's home stringing machine (too heavy to move around) for the recreational and club player.

My kids started to string by themselves! Everything goes well so far!

Saw some reviews that said it can’t be used for badminton. But after getting it and stringing two rackets with it already I can say it can be used for badminton. You just need to buy a different set of clamps because the ones they give you is too big. But overall it is a good stringing machine.

Great beginner stringing machine. Got up and running in no time. Very useful setup video on the Gamma Sports Youtube channel. Package came with everything you need to get started, even a starting pack with 3 sets of Gamma strings (polyester, synthetic and multifilament) and reading material. Basic tools also included (awls, needle nose pliers/cutter and hex keys), but you'd need to get your own starting clamp if you want one. I'm a total beginner so it took me close to 2 hrs to string my first racket, but have it down to 45 mins now that I've got more practice. Naturally, using a drop weight machine take more time, but how fast you can string comes down to getting into rhythm and having good technique when stringing the crosses.

I replaced my Gamma X2 machine with this one because the clutch was starting to slip after about six years of regular use. That X2 saved me thousands in stringing fees so it does not owe me anything. At first, I did not care for the red plastic on the Gamma Progression 602. Once I started using it though, all my mis-givings disappeared. The racket was super stable once set up. This machine was as easy to use as my old one with the advantage of having a super-accurate tensioner. I would highly recommend this stringing machine if you want to save big $$$.

This machine is really well built and sturdy. I tested it right out of the box and the tension was dead on. So far I’ve stung about 20 racquets with no issues. This machine is incredibly easy to use and makes stringing for yourself and others a breeze.

Depending on how much you play, how particular you are about strings and tensions, how much you like to experiment with strings & tension, if you string for others, and your age/how likely you think you'll continue to play in the future, learning how to string and buying a stringer can be an incredibly good idea and actually cost effective in the long run. This is my 2nd, first one was a Progression II 602 with floating clamps that I used for about 20 years and it's still going strong with the guy I sold it to. But going from a drop weight with floating clamps to this is like from riding a bike to driving a car. The bases slide around well after adjustment and the clamps have held every string so far with no slipping that I've noticed, even when I thought the pressure might have been too low. With some practice you can operate the clamp totally with your left hand - sliding, lifting it and squeezing the lever, while keeping your right hand near the tensioner and string. I've been able to string much faster with it, but also at a very consistent quality which makes me more likely to offer to string for other people.The buttons have a super heavy duty feel & action and you can tell the build quality is very high. It's heavy and fairly large, so you either need a good table that ideally isn't much wider than the machine, or one of the stands. Mine is on a small table elevated by 2x4s, which are on thin non-slip pads, and I put velcro tape on the wood and the bottom of the machine's feet so it won't move like some tabletop machines will if you pull a cross too hard. Combined with its weight, this gives a ton of stability. If you're thinking you'll move it around, take it out and put it away every time you need to string, you should reconsider. I did that with the 602 and thought I maybe could with this, and because of its weight and size that's out of the question - you'll want to have a pretty much permanent place for it ready before you buy.One downside I could see at least for some people is the rotational gripper. The string goes about 3/4 around a wheel and then through a channel in the middle of it before tensioning. Since I was used to it from my previous machine, it's not a problem but if you're really trying for speed or are used to other string gripping mechanisms, it might seem like an extra motion. In the end it's really a minor thing, many other of Gamma's machines have it and with repetition it becomes easier to use. Also the, I guess "audible feedback" is pretty bold, and as far as I know you can't turn it off. It beeps once when you pull tension and then twice after the tension is reached (indicating you can take the clamp off etc.) Search around for videos if you want to see/hear it in action and decide how much of a problem that would be.Overall if you think you're in need of a stringer and fortunate enough to be able to possibly afford one in this price range, this machine is really worth looking into.

A good equipment for stringing that is easy to use and quick to learn for new users as well. Have to initially remember to position the racket and the 4 side holders well secured else might cause issues.Stable and strong in its structure. Would recommend to only use it when mounted on a proper stand.The lock knob for the turn table is in an odd position and have to bend to properly see or hold it to turn and lock the table when needed. You only need it intermittently so not a show-stopper.Have successfully now done 5+ rackets in 4 weeks time since I bought. Love it!!

Very good quality machine for personal home stringing use set tension & push a button easy.