Shopping Cart

Your cart is empty.

Your cart is empty.

GeeekPi P33 M.2 NVME M-Key PoE+ Hat with Official Pi 5 Active Cooler and Aluminum Case for Raspberry Pi 5, Support M.2 NVMe SSDs 2230/2242/2260/2280

4.8 (12) Write Review
Free shipping on orders over $29.99

$49.99

$ 22 .99 $22.99

In Stock

About this item

  • Aluminum case is designed for P33 M.2 NVME M-Key PoE+ Hat. It can access to most of ports of Raspberry Pi Board.
  • High-Speed NVMe SSD Support --- The HAT board supports M.2 NVMe SSDs for fast data access and storage.
  • M.2 Interface --- Utilizes the PCIe interface for high-performance communication between the SSD and Raspberry Pi.
  • Power over Ethernet (PoE+) Capability --- Streamlines the power supply setup by allowing the Raspberry Pi 5 to be powered through the Ethernet port.
  • 5.1V/4.5A Output --- Ensures that the Raspberry Pi 5 and any connected peripherals receive adequate power for optimal performance.
  • Active Cooler --- Pi5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.


Product Description

raspberry pi 5 case
raspberry pi 5 poe
raspberry pi poe hat
raspberry pi pcie
raspberry pi 5

Matthias J.
Reviewed in Germany on March 4, 2025
Habe schon vor längerer Zeit 2 getrennte Geräte bestellt. (PoE HAT und NvME HAT)Diese beiden kann man leider nicht so recht kombinieren.Also hab ich dieses HAT gefunden.Hab es gleich mit Gehäuse bestellt.Was oll sich da sagen. Bin schwer begeistert nur mit einem kleinen MankoPositiv:Tolle Verarbeitung des Gehäuses und der ganzen Komponenten.Lüfter ist solide und macht was er soll (Den alten Kühlkörper mußte ich abzwicken, da ich den nicht aushebeln konnte, macht aber nichts)Wäremepads sind auf dem Kühlkörper mit dem Lüfter schon vorangebracht.Gehäuse ist aus Alu, außer dem Deckel, was die Wärme Ableitung besser macht.der Raspberry 5 hat so bei mir (was die CPU betrifft) ca 56 Grad konstant.olles Stecksystem mit Platz nach oben.Alles Montage Zubehör ist dabei.Das was leider jeder bekrittelt, ist das anbringen des Flachbandkabels, welches aber einfacher anzubringen ist, wenn man es von hinten aufrollt: Zuerst am Deckel anbringen und dann, beim aufstecken des HATs, am Raspberry.Kontra:Die SSD, bzw. der Chip neben der SSD wird sehr heiß. Lt. Support ist dies normal (daher nur 4 Sterne)diese beiden heizen sich gegenseitig sehr auf und ich habe eher bedenken das so die NvME lange überleben wird (wäre nicht die erste die den Hitzetod erleidet)P.S. Auf dem Foto war ich zu Faul die 2te Seite abzuziehen von der Folie, die (wie immer) schwer abzubekommen istEs wäre vl. von Vorteil, das Gehäuse eine Spur höher zu machen und dafür noch einen kleinen Lüfter in den Deckel des Gehäuses einzubauen, damit auch die NvME etwas mehr Wind abbekommt (vl. hab ich mal die Muse, mir einen Deckel mit Lüfter zu basteln mit meinem 3D Drucker)Alles in allem ein recht gut durchdachtes System, mit Öffnungen an mehreren Stellen und vor allem PoE und NvME in einem und vor allem hat man noch die Möglichkeit noch mehr HATs anzubringen (keine Ahnung ob das funktioniert oder nicht)
Gabriele
Reviewed in Italy on March 25, 2025
Perfetta e spaziosa
Aaron Rawson
Reviewed in the United States on March 24, 2025
Missing the manual. Don't plug in a USBC power supply at the same time. That will probably fry your Pi. It did to mine. There wasn't even a QR code pointing to the manual, which did point out this fact.
Customer
Reviewed in the United States on February 5, 2025
Works as advertised POE worked and nvme worked on raspberry pi 5
Christopher
Reviewed in the United States on February 21, 2025
It seems the POE isolation transformer has a loud high-pitch whine anytime the NVMe is being accessed.
Wally
Reviewed in the United States on February 15, 2025
Really nice overall, only demerit being the plastic cover. Great metal housing, and the PoE/NVME hat is absolutely outstanding.
JamB
Reviewed in the United States on February 12, 2025
This was very easy to assemble with a Pi5. With a few commands from raspberrytips.com it is very easy to get your Pi running on much faster and more durable NVME storage. And if you have a PoE network, you can have a headless Pi5 with only one connected cable. I was happy enough that I purchased a second one.
Dirk Laug
Reviewed in Germany on January 21, 2025
Super Set immer wieder. Einfach zu empfehlen.
Jonathan Pillar
Reviewed in the United Kingdom on January 2, 2025
Nice kit. Metal case is good quality but found there is a significant difference in CPU temperature even with official Raspberry PI fan attached. Obviously this is going to be because of the hat reducing airflow but its worth being aware for setups with more restricted airflow
D. Hölscher
Reviewed in Germany on April 7, 2025
Perfekt passendes und funktionales Gehäuse.
JYoder
Reviewed in the United States on December 31, 2024
Not sure if it is me or not, I have very little knowlege of Raspberry Pi5, but when I connect this with my POE supply, I continually get the error "Reset due to low power event. Please check your power supply". I My POE injector supports up to 60W so that should be enough.I also have noticed that when I try using the Internal Solid State Drive that the system goes offline periodically and crashes, This doesn't happen when I use the same image with the SD card on the main board. My only conclusion is that the hat doesn't seem to be supplying enough power. I have two Pi5 systems with the two corresponding hats and they both have the same issue.Again, this could be something I"m doing wrong, but at first glance it seems to me that the hat isn't supplying enough power to run the Pi5.
Customer
Reviewed in the United States on December 21, 2024
Manually set to PCIe 3.0 can get 800+MB/s.