Your cart is empty.
Your cart is empty.TOYOTA OEM Front Suspension-Upper Control Arm Bolt 90105A0095
- Seller & Payment Information Seller name:whiteracingproductsllc_nosWe Accept: Customer Support If you have questions about the product or your order please contact us via for assistance. Thank youBusiness Hours: 9 am to 5:30 pm est
Exported By ExportYourStore
Logan
Reviewed in the United States on April 7, 2025
I needed to cut the original due to where the frame sat on my 2005 tacoma, this one fit perfectly as a replacement.
Derk
Reviewed in the United States on March 26, 2023
Oem and exactly what I needed for my upper control arm. I replaced my uca for a 2014 FJ cruiser. I believe it's the same for all FJ years and most Tacoma's. My 2014 actually didn't have issues I was reading about the install. Some people had to bend part of their fender wheel well to get it out. A lot of people said rather than bend the fender they'd rather cut the bolt and feed it back in the opposite way. But for my 2014 FJ. I was able to slip it out and only having to remove 1 wire hardness mount on the passenger side. And for the driver side the battery cable mount. Life saver just having this for in case.
Dan
Reviewed in the United States on July 3, 2020
Exact OE replacement part for the Front UCA long bolt on my 2004 4Runner SR5 4wd v8. The threads were rusted on mine so it needed to be replaced.
JDub2899
Reviewed in the United States on May 9, 2019
If you're not familiar with replacing the control arms on a Toyota Tacoma, the fender is in the way of getting the bolt out. On some of the older models, you could bend the fender out of the way, but you end up with damaged paint and metal, and a potential for rust and other issues. On the newer 2016+ models, even bending the inner fender isn't enough. Once I read cutting the bolt head off and then replacing it worked best, I ordered these and they were perfect replacements.
Jimmy N.
Reviewed in the United States on October 20, 2019
Glad I order the new bolt which made the install of new UCR easier
azbearhuntr
Reviewed in the United States on April 12, 2018
Used to replace the UCA’s in my 3rd gen Tacoma. Right part and made the job easier.
kyle silva
Reviewed in the United States on May 22, 2017
Same as oem doesn't include a nut but any good hardware store will be easy to find the metric nut at once you have the bolt. This is a must have to make any 05+ tacoma uca replacment a piece of cake.
KZRPK5
Reviewed in the United States on April 19, 2016
If you are replacing upper control arms on 2005-current Toyota Tacoma, then these are the bolts you will want. Cutting of UCA bolt is the easiest way to replace them as opposed to routing them out through the top and moving/bending/twisting parts to accomplish it. After all that, just run them from the bottom up. Much easier.
Recommended Products
$45.99
$ 19 .99 $19.99
$39.95
$ 20 .99 $20.99