Your cart is empty.
Your cart is empty.Product Description
The feature of BINLVSOW Front Spoiler Chin Fairing Lower Cowl Cover
- High Quality：Constructed from tough ABS plastic, this fairing provides durability and resistance to impact and weather, ensuring that it will last for years to come, it is a very cost-effective and a nice choice that you to purchase our product.
- Protection: One of the primary functions of the Front Spoiler Chin Fairing is to provide protection to the front end components. It acts as a barrier against road debris, stones, and other small objects that could potentially damage the lower part of your motorcycle.
- Improved Stability: The fairing's design also contributes to improved stability and handling of the motorcycle. By creating downforce and directing the airflow, it increases the front-end grip and stability, especially during high-speed rides or when cornering.
- With its sleek and stylish gloss black design, it enhances the look of your Motorcycle, making it stand out from the crowd.
BINLVSOW Gloss Black Fairing Lower Cowl Cover
Fitment: It is aftermarket parts used for Harley.
Fits 2004-2014 Harley Davidson Sportster 883 XL1200 models
For Harley Forty-Eight XL1200X 2010-2014
For Harley Iron 883 XL883N 2010-2014
For Harley Seventy Two XL1200V 2012-2014
For Harley Sportster 1200 2004-2014
For Harley Sportster 883 2004-2014
BINLVSOW
Gloss Black Front Spoiler Chin Fairing Lower Cowl Cover
Garot M. Conklin
Reviewed in the United States on September 10, 2024
Purchased for a 2020 Harley Davidson Iron 1200. This was about a 15 minute install and fit perfectly. Made of thick plastic and the mounts fit perfectly to the front downtubes. Only issue was the black coarse threaded screws are a little long and you can screw them all the way through the front of the spoiler. You also need blue lock as they recommend using it in the instructions but it’s not supplied with the spoiler. It’s a little difficult to reach the mounts from the undercarriage of the bike without a lift, but it can be done.
Customer303
Reviewed in the United States on July 14, 2024
HD asks 200 for this same thing. Works and looks the same
Alex Brayman
Reviewed in the United States on March 20, 2024
Quick, simple install. Changed the look of my bike in less then 10 minutes. Time will tell if it will hold up on the roads
Scott
Reviewed in Canada on February 8, 2024
Seems to be good quality. No instructions included but not hard to figure out. Two of the screws provided were too small so I had to buy slightly larger ones. Other than that I would buy again.
Arizona Kid
Reviewed in the United States on November 30, 2024
High quality material and sturdy hardware worked out great. Directions were lacking, but you can figure it out. There’s one fastener that’s installed from the bottom and it’s up inside the chin fairing. Use a socket and extension to get it started from the bottom and you got it. It’s much easier and gives you more room if you lift the motorcycle about a foot or so (motorcycle lift required). The finished look is great and I’m totally happy with the fit, finish and look of the chin fairing. The color (Vivid Black) is spot on as well. A great product at an amazing price.
ryan paul
Reviewed in the United States on April 30, 2024
To start off I installed this on a 2012 Harley 1200N Nightster. As many others stated about the hardware not fitting I fortunately did not have this issue. All of the supplied bolts and screws worked great. If you are pretty handy and have a good head on your shoulders, this should be no problem to install, however, if you’re just a normal every day person, this will be a challenge The hardest part was installing the middle bolt that you must reach up through the bottom hole of the fairing. For myself, I had this installed well under 15 minutes and I think it looks great. The quality to me is good and it definitely is way better than spending how much Harley wants for one of theirs.
Anonymous
Reviewed in Canada on July 6, 2022
Nice finish and the hardware is decent (even supplied two extra screws for some reason). Main bracket goes on easily as do the two rear bolts from the bottom. Two issues getting the third bottom bolt in from underneath...1) neither the tab on the main bracket nor the small bracket mounted inside the spoiler are at 90 degrees so you will be unbelievably frustrated when you can't get the bolt in (and you're doing it blind) - before you install either grab a hammer and make sure both tabs are parallel at 90 degrees, and 2) forget using the supplied washer on the third bolt as it won't fit (bolt is too short) - just use the bolt itself and feel around until it starts to thread. Looks good on the bike if you can get it installed.
Colin
Reviewed in Australia on July 15, 2022
Fits my 2014 Forty Eight Sportster perfect. The centre internal bolt just needs a little patience.
Jim Brown
Reviewed in the United States on April 14, 2022
1. Mix of metric and SAE (Harley-Davidson) bolt paterns.2. Front bolt from underneath, is biggest pain to install, which holds the nose in place. Had to switch to Allen head bolt, because it's impossible to access it and see what you're doing, without hoisting the bike up, even a lift will not let you see UNDERNEATH the bike.3. Instruction pics are really over-exposed and can't really see anything, just xerox copies.4. Extra screws (sheet metal) that absolutely don't go to anything, which coupled with ridiculous "instructions" leaves you wondering "WTF???"
Ivan
Reviewed in the United States on September 17, 2020
Really easy to install with a trip to the hardware store. The two bolts that go on to the top of the frame are perfect fit and so are the two smaller screws at the bottom. There is 3 screws that hold a bracket inside the spoiler 1 is threaded the two other ones are not. I used a screw that fit snug with some loctite and that fixed the problem.It give the bike a clean look not a single scratch on it witch was my biggest fear they did a good job wrapping it so it doesnt get scratched during shipping.
Christian L.
Reviewed in the United States on August 15, 2019
Hardware is cheap. Snapped. Will drill out and get grade 8 bolts! Other than that ok..
Recommended Products