Your cart is empty.
Your cart is empty.Product Description
Godox XPro Wireless TTL Transmitter
Specifications
- Modeling lamp:Control the modeling lamp by the flash trigger
- Beeper:Control the beeper by the flash trigger
- Wireless setting:The receiver end can control the camera shooting through the 2.5mm sync cord jack
- ZOOM setting: Adjust the ZOOM value by the transmitter
- TCM function:Transform the TTL shooting value into the output value in the M node
- Firmware upgrade:Upgrade through the Type-C USB port
- Memory function:Settings will be stored 2 seconds after lasht operation and recover after a restart
Wireless Flash
- Transmission range(approx.0-100m)
- Built-in wireless:2.4G
- Modulation mode:MSK
- Channel:32
- Wireless ID:01-99
- Group:16
- High-speed sync:Yes
- Second-curtain sync:Yes
- Flash exposure lock:Yes
- Focus assist:Yes
Package Included
- 1 x XPro Wireless Transmitter
- 1 x User Manual
- 1 x HanCraft Lens cloth
Built-in 2.4G Wireless X System
- XPro Trigger with built-in 2.4G wireless system can control other camera flashes, other strobe flashes and studio flashes.
LCD screen/ Multipurpose Buttons
- With Multipurpose buttons, you can realize quick setting.
- LCD screen offers clear and precise operation.
4 Method to Use
- As a wireless flash trigger
- As a wireless speedlite trigger
- As a wireless shutter release trigger
- As a flash (without Godox X system) Trigger with 2.5mm sync cord jack
Tomchik62
Reviewed in the United Kingdom on March 6, 2024
I bought this to replace a cheap trigger and other members of a photo workshop group recommended this and they were correct. It works very well but takes a bit to learn how to use it well.
Customer
Reviewed in the United Kingdom on March 10, 2024
Simple to adjust lighting
Dante Herrera
Reviewed in the United States on February 12, 2024
Llegó bien
Ben Williams
Reviewed in the United Kingdom on December 6, 2024
was simple to set up...and worked how I hoped it would...Great product
customer
Reviewed in the United States on August 28, 2023
I really enjoy this product. I usually forget to put it back on the camera so that the flash will work, but Nikon can't control that. It's an excellent trigger.
Bertie
Reviewed in the United Kingdom on February 3, 2023
Nice trigger for the excellent Godox flash system. Previously bought the X1T-N trigger, and thought I would give this one a try on a new 'studio project' I had to do. That TCM function is fantastic.My project was basically going through various warehouse rooms full of stuff that needed to be sold. My job was to photograph all of the stuff so it could go up on Ebay. This was a multi-day job. On the first day I was using my existing system and manually setting up my lights with a flash meter. This was essentially a simple stock photo shoot, so I just wanted even diffused lighting between left and right lights. Every time we moved from shooting location to shooting location I would have to set this up again, which was laborious.For the second day (some days after the first shoot) I got this trigger to try it out. Wow. Made life so much easier. With the unit you set the flashes to TTL. Shoot a gray card to get the TTL to figure out the correct exposure for the subject location. Then press the TCM to convert those TTL values to Manual value equivalents. After that shoot, shoot, shoot, until we had to move to the next location. And then again gray card, TCM, shoot, shoot, shoot. Really good. Made the workstream so much more efficient.And the unit is not that much bigger than my previous X1T-N trigger. It just sits slightly differently on the camera, but isn't anything mayor to carry around.I'm very happy with my new XPro trigger. My X1T-N just became my backup trigger!
JC
Reviewed in the United States on December 19, 2023
This product would be great if it fit my gear it didn’t not fit on my d850 or 750 and yes I ordered the right version but is made wrong. I have had hit or miss luck with ordering these. Same scenario with a Sony o ordered one for and one didn’t. Obviously it’s not the real deal or godox has issue in manufacturing at times. The ones that fit right do work as I have them but have had this happen a couple times.
Smokin AZ
Reviewed in the United States on September 22, 2022
Relatively easy to understand and use.
Andy Worthington
Reviewed in the United Kingdom on November 29, 2022
I'm really pleased how easily this sites between my flash units and camera providing all the remote control I need to adjust the system. Very low cost considering the functions it provides.
Ashley Babineaux
Reviewed in the United States on February 9, 2021
It’s works great, no problems what do ever and came in quickly.
Customer
Reviewed in the United States on February 26, 2021
Great wireless trigger. Easy to connect , use it to control ad400 pro and ad200. No need to walk over to each flash , can control the power individually from the trigger. Would recommend
Eyal Buganim
Reviewed in the United States on April 26, 2021
Moved from X1t to the Xpro, definitelyBetter. Easy to use.The only thing it less than X1t is that I need to press the high sync button if I want to setup the shutter to more than 250. In the X1t it was automatically
K. A Tate
Reviewed in the United States on December 29, 2020
Once purchased, I was a bit intimidated. It seemed to be difficult to understand, especially when trying to navigating the instructions but onceni got on YouTube, I discovered it was quite simple. It is my go-to for listing. Highly recommend this product.
Recommended Products