Your cart is empty.
Your cart is empty.Product Description
GP Pro Series - Universal Front Headlift and Rear Sportbike Stands by GPI Industries Inc
- GPI Industries has over 25 years of combined experience in the sportbike industry. With our incredible quality and incredible prices, you can rest assure that you are getting some of the best stands on the market today.
- Rock solid stands at rock bottom prices......period.
- All of our stands are built, designed and tested to work on almost every sport and sport touring bike on the market today.
- We are so confident in the quality of our products; GPI Industries backs all our products for life.
- Not only are we the manufacturer of your stands, but we are also the seller. That means you are purchasing your stands directly from us......and your satisfaction is out #1 priority.
- All stand sets come with directions for assembly and operation.
-
GP Pro Series Universal Front Headlift and Rear Stand Set
- GP Pro Series Front Headlift and Rear Race Stand Package - With Front Head Lift Adapter and 10 Mounting Pins.
- Head Lift Adapter has 5 adjustable height positions - Works with almost every sportbike on the market today.
- Solid steel frame construction. These stands will not bend of flex under the weight of your bike.
- Fully Adjustable width on both front and rear stands to work on almost every sportbike on the market today.
- Rear stand come with "Y" shaped lifting adapters to be used when swingarm spools are available. Also included are our universal lifting adapters to be used when swingarm spools are not available.
- Our GP Pro Series Front Headlift and Rear Race Stands are constructed from a SOLID ONE PIECE, OVERSIZED STEEL TUBE.
- These stands will not bend, flex or shift, like so many of the lower quality bolt together stands you see all over the internet today.
- Each GP Pro Series race stand is constructed from an oversized 1 3/8" carbon steel tube. We also use a larger than normal wall thickness, which results in superior strength and stability. These stands will not bend or flex !!
- Large oversized solid core wheels are used to make the lifting process easy and smooth.
GP Pro Series Headlift Stand set - A close up look at our most popular stands to date. Dont kick yourself for purchasing a lessers quality stand......isnt your bike worth it?
GP Pro series Front Headlift and Rear stand set in use on a 2007 CBR-1000rr
GP Pro Series Rear stand in use on a 2007 CBR-1000rr
GP Pro Series Front Headlift stand in use on a 2007 CBR-1000rr
Kevin
Reviewed in the United States on February 24, 2025
I was looking to get some heavy duty stands to perform some Maintenance and do some upgrades to my Honda CBR. I had cheap venom stands I bought from amazon that worked but with my bike being as heavy as it is, i had zero confidence in the cheap stands. They would bend and would not stay balanced. I was going to get some PitBull stands but they were out of stock to I took a chance with these GPI stands and I’m so glad I did. These are very comparable to the pit bull stands and man are these stands robust. They lift my heavy CBR with ease and remain stable and level. I purchased both rear and front triple tree stands. The front stand can be converted to lift bikes using the triple tree stand or just using the forks so I can decided to switch them should I need to remove the front wheel. The rear stand can be converted to lift using the swing arm or spools. The construction is top notch. I am extremely happy with my purchase.
reader
Reviewed in the United States on March 26, 2024
Timely delivery, great quality, and easy to install
B. Izzo
Reviewed in the United States on May 20, 2022
So I have a Pit-Bull rear stand with 18” removable handle. Great stand. Started looking at their front Hybrid stand but it got real expensive very quickly and each PIN is like $17. So this product had both stands for less than the Hybrid Pit-bill. So I received the product in a decent amount of time. Product well protected in packaging. A little bit of a PITA to unwrap but no scratches or dents. There are instructions to use but not how to assemble. However, you can probably figure it out if you have used stands before or look real close at the picture. Once assembled I took both outside and did some work on my Wife’s GSXR 600. Like I said, I would probably rate 5 star if I hadn’t used PB before. The product is pretty sturdy and the bike felt safe on both stands. The 18” handle on the PB gives a little better leverage, and there was a point lifting the rear that I was concerned about the bike getting off balance. But if you take your time and pay attention you shouldn’t have any problems. But I do trust the PB a little more with single person use. But not enough to tell you not to buy. The product feels pretty well built compared to the cheaper stands you see on Amazon or Cycle Gear. The number of pins that come with it is a very nice plus! I found the 15mm for the GSXR and it was a nice fit. Overall I would purchase again. And for the money I think it’s a really nice combo set. And you can lift by spools or swing arm, as well as fork or head/triple clamp.I will say this. If you’re not going to do actual fork work, I found lifting from the fork easier and plenty sturdy. Just an FYI if money is a potential concern.I would recommend.
Kasaru
Reviewed in the United States on April 6, 2021
I had a Trackside rear stand that was great and a generic fork stand that was super sketchy, but it was time to service the fork oil on my XSR900. For my first time using a head lift stand, the lack of assembly instructions was a tad confusing when putting together the front stand, but this GPI set works great. It's very well made and strong (the rear stand a bit less so) and when the bike was all the way up on both stands, it was sturdy and I was not at all anxious of it falling. The front tire comes off the ground far enough that the wheel can come out no problem without removing the fender. The vast variety of head pins is a very nice addition that seems to be missing from other stand sets. Shortly after servicing the forks on my XSR, I did the same on my friend's Ninja 650 and even on the full-fairing bike absolutely nothing had to be removed from the bike in order to fit the head lift stand. For the price (relative to Pit-Bull and Woodcraft and such) it's difficult to not recommend these stands, they're the last I'm ever going to need.
Charlie VanDyke
Reviewed in the United States on May 24, 2015
Purchased these for a 2014 Suzuki Hayabusa. They worked perfectly, no issues very sturdy with just the rear, or with both front and rear. I was hesitant to purchase because of the weight of the bike, but there was no problem whatsoever. The only thing I had to do with move the front brake line a little out of the way while sticking the front triple tree pin in. Did not have to remove, just move it out of the way a bit. One thing I will say if you have a busa, is to have a person help you hold it upright while lifting the back up, due to the weight of it. Otherwise, I would buy these over and over again. Great value for very sturdy bike stands.
Richard Silva
Reviewed in the United States on April 3, 2014
I had gotten my stands two weeks ago after reading other reviews other before buying. I had a small problem regarding that my bike didn't have anyplace to install spools. I ended up using the "L' (rear) picked up my bike and then used the front tree stand. It was great very stable, but noticed my rear tire did not get off the ground and so wheel did turn. I had it too far into swingarm. No problem I washed my bike and took down the bike. I again pick up the rear , but moved "L" closer in it went up, but started to check both "Ls" notice it was not set right then the bike started moves, grab the bike and also the stand stop it from moving more. It bent and tore one the rubber "L".I didn't didn't even think that the swing arm was not the same distant from the wheel and toward the fauther foward. ( it was set for distand about 13.1/2 ...needed 12 3/4 distant.Now... I have read about Mr. Lee (the owner) how he helped others owners questions about his stands on other reviews. That impress me and that help me chose these strong stands. I had contact with Mr. Lee and after sending one email about my problem he was sending another "L" to me. He didn't stop there he still made contact with me and answers my concerns how can I used my stands. (by the way the wider stands goes to the rear). He also refunded some of my money and he didn't have to do that ...he was already sending another "L" to me. Guys great stands and great owner... if I run a business...thats how I will work it... is to stand behind your Stands (sorry about the pun). Pass that along... I will.
Recommended Products
$229.99
$ 93 .99 $93.99
$419.99
$ 99 .00 $99.00