Shopping Cart

Your cart is empty.

Your cart is empty.

GPS Module with Antenna UAV Drone M10050 M9140 chip Ultra-Low Power GNSS Receiver for Track GPS BE-180 BK-180 BN-180 BE-220 BK-220 BN-220

Free shipping on orders over $29.99

$18.88

$ 9 .99 $9.99

In Stock

About this item

  • Update rate: 0.25Hz-18Hz,default 10Hz
  • The red light, the PPS light, does not light up if it is not positioned; after 3D positioning, it starts to flash.
  • With FLASH, the configuration can be changed, and the power will not be lost
  • Not positioned, the light is off; after 3D positioning, the blue light flashes
  • Note: Please use the GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning.



Product Description

BEITIAN 10th GENERATION GNSS MODULE

BE-220

BEITIAN 10th GENERATION GNSS MODULE

Chip characteristics:

Chip :M1 0050

Frequency:GPS L1 C/A, QZSSL1 C/A/S BDS B1IB1C; GalileoE1B/C,SBASL1 C/A: WAAS, EGNOS, MSAS, GAGAN

Operating mode:GPS+BDS+GALILEO+SBAS+QZSS

Sensitivity:

Track:-166dBm

Re-arrest:- 160dBm

Cold start:-148dBm

Hot Start:160dBm

Precision:

Horizontal accuracy:2.0m CEP 2D RMS SBAS Auxiliary (for Open Sky)

Speed accuracy:0.05m/s

Dynamic heading angle accuracy:0.3 deg

1PPS time accuracy:RMS 30ns

99% 60ns

Start time:

Cold start :27s

Hot Start :1s

Assisted start:1s

Output Data:

Baud rate:4800bps - 921600bps,default 38400bps

Output 1evel:TTL level

Output protocol:NMEA UBX

NMEA sentences:RMC,VTG,GGA_GSA_GSVGLL

Update frequency:0.25Hz-18Hz default 1Hz

Second pulse: Configurable from 0.25 Hz to 10 MHz, the default period is 1s,and the high level lasts for 100ms

Work restrictions:

High :80,000m

Speed:<500m/s

Gravitational acceleration:<4g

Power consumption:

Voltage:DC 3.6V-5.5V, typical: 5.0V

Current:Normal 50mA/5.0V

Physical paraments:

Size:22*20*6mm

Weight:5.3g

Package:1.00mm 4pins connector

Surroundings:

Operating temperature:-40°C~ +85°C

Storage temperature:-40°C~ +105°C

LED:

Built-in LED: TX LED (blue. The data cutput, TX LED flashing)

PPS LED(red. PPS LED not bright when GPS not fixed,flashing when fixed)

M10050 CHIP UBLOX GNS MODULE

Five positioning in one for better navigation:

GPS+BDS+GALILEO+SBAS+QZSS positioning method

Flexible choice, optional use;

Select the targeting mode,; Single-mode positioning and multi-mode combination positioning can be selected according to project requirements.

BE-220

GET ACCURATE DATA

Precise location can be obtained by latitude and longitude, and speed and time information can be obtained.

Detailed positioning information can be obtained through the NMEA-0183 protocol.

APPLICATION SECENARIOS

AUTOPILOT

AUTOPILOT

AGRICULTURE

AGRICULTURE

UAV

UAV

ROBOT

ROBOT

Beitian

BEITIAN

The products developed and operated by the company include GNSS antenna,GNSS module,GNSS receiver, BeiDou module, G-MOUSE and GPS receiver etc.

Our products are widely used in driving test, lawn mower, UAV, precision agriculture, automatic driving and other fields.


Glenn R. Cummings
Reviewed in the United States on September 8, 2024
These work really well with a low voltage RS232 to a USB adapter there's also a freeware program from I believe you blocks that allows you to work with features
Jamie Flanery
Reviewed in the United States on August 27, 2023
No wiring diagram so I went on the assumption that yellow is TX WRONG!! AFTER I did some research and realized the wiring is backwards… white wire is TX from unit and Yellow is RX and got it soldered correctly It works GREAT! Would have given it 5 stars otherwise.
Recommended Products