Your cart is empty.
Your cart is empty.
Adjustable Clearance
1 Loose the 2 bolts on both ends;
2.Spin the right knob to get a proper clearance;
3.Spin and make sure you've got the same place for the left knob;
4.Tighten the 2 bolts to fix the rollers.
Specifications
Color: Silver
Style: Modern
Speed: Manual
Assembly Required: Yes
Mount Type: Bucket(Not Included)
Recommended Uses For Product: Grinding
Material: Carbon Steel, Stainless Steel, Aluminum
Capacity: 4L/1.06gal
Discharging Granularity: 0.2mm
Hopper Load Bearing: 4.99kg/11lbs
Adjustable Distance Between Rollers: 0-2.5mm/0-0.098inch
Product Height: 26.6cm/10.47inch
Base Size: 15.2*7.6cm/5.98*2.99inch
Roller Size(L*D): 15*3.8cm/6*1.5inch
Funnel Opening Size: 21.6*21.6cm/8.5*8.5inch
Crank Handle: 11.4cm/4.49inch
Package size: 31*26.5*15cm/12*10*6inch
Gross Weight: 3.1kg/6.83lbs
Package Included
1*Grain Mill Grinder
2*Aluminum Strips
All Needed Accessories
Notes
1.Please check the size carefully before ordering.
2.The product does not include an electric drill. You will need to supply or build a base to set the mill over a grain bin or 5-gallon bucket(not included). Grinding speed for hand crank operation depends on the individual.
3.Please note that it is only used for grinding and crushing dry grains. Not for legumes, moist grains, or flours.
4.If you receive the machine with oil, you can use a clean towel to wipe the machine, and then use some malt cereals to repeatedly grind 1-2 times, and finally wipe it clean.
5.If rotating at high speeds, momentary jamming and stopping when there is debris can cause arm injuries. You can contact us to send you the installation and operation videos for your reference.
6.Please make sure it does not have friction with the internal rollers when the hopper is installed, if there is friction, please adjust the hopper manually.
7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Michael Harrison
Reviewed in the United States on April 10, 2025
On the positive side, it works well enough. On the negative: It does not come with assembly instructions, though I was able to figure it out. The chute was the most difficult to assemble because the metal tabs do not fit into the corresponding slots without being bent up a bit. Also, those metal sheets are sharp and I cut myself trying to fit two pieces together.Once assembled, the chute is still a bit rickety and I had to use some duct tape to keep it stable.All in all, it pretty much works as it’s supposed to, but adjusting the rollers isn’t as easy as advertised. Be aware that once assembled, you need to mount the mill on a platform or clamp or strap to a bucket to keep it stable while grinding.I’d offer another half star if it cost less. The shipping was $20 so I think the overall cost of around $75.00 is not really worth it.At some point I’ll probably spend as much to buy something similar but better quality in person at Home Depot.
Recommended Products
