Your cart is empty.
Your cart is empty.Product Description
The Any Situation Solution
Harmony Cases are built to withstand the most demanding environments to protect your equipment no matter what. Harmony Cases are designed by audio enthusiasts who take great pride in ensuring that our built to the highest standards. When your using a Harmony case you don't have to worry and can focus on what's important, your music!
Durable & Easy
Set up is a breeze with spring loaded supports and only takes seconds. The 3/8" black laminated plywood chrome finish hardware ensures a stable workspace where ever your music takes you.
Double The Space
No more cramped table tops. Harmony Cases give you two large shelves behind this unit. The top shelf measures 54" x 18" giving you tons of space. Below that is a second workspace measuring 32" x 15".
Ultra Portable
Not a lot of space? Not a problem! In seconds the workstation can be collapsed down to only 33.125" x 36.25" x 3.25" making storage and transportation simple.
Dimensions:
Work Area
- Upper Table: 54" x 18"
- Middle Shelf: 32" x 15"
Overall Dimensions Assembled:
- 54" x 36-5/8" x 18"
Folded Dimensions:
- 33-1/8" x 36-1/4" x 3-1/4"
Specifications:
NOTE - Only Case is Included with Purchase
- 3/8" Black Laminated Plywood
- Quick and Easy Setup in Seconds
- Folds Down for Compact Storage
- Chrome Finish Hardware
- Recessed Latch
- Stable and Durable
- Spring Loaded Handle
- Scuff Free Rubber Feet
- Upper and Lower Work Area
Darren Ferreira
Reviewed in the United States on January 21, 2025
This is a very durable and good looking DJ stand. Works perfect with my controller. Love that it has a shelf. Wheels would make it even nicer because it's a bit heavy to carry. But for the price I'm very happy.
Shaymus McFamous
Reviewed in the United States on October 21, 2024
First off, this DJ workstation is very convenient. It looks amazing and has plenty of space on top as well as the 2nd shelf. It fit my full sized laptop, wireless mic receiver, lighting DMX controller, iPad and cell phone with room to spare. I don't use a mixing station, but it would be no problem. It is very sturdy. I did a breezy outdoor wedding yesterday, and it didn't budge. In fact, I successfully bungeed my fold up scrim screen to it because the screen kept blowing over.That said, I am conflicted. It is very heavy because of it's awkward physics when folded. It folds up into a fairly convenient flat (3" +/- deep) rectangle that slid into my hatchback perfectly. I will refer to the workstation in it's folded state as the "mat" from here on out. The weight is rough because it is awkward to carry when it only has one handle, that handle is on a flat side of the mat, is imbedded into a metal housing, and has an extremely strong spring in it. Maybe mine was manufactured incorrectly. If not, the handle is a serious design flaw. It is situated on a flat side, ¼ of the way to an edge; so, you have to carry it with the handle facing away from your body and the mat flat against the side of your body with the majority of it and it's weight below the handle. The spring inside the handle is so strong it clamps your hand or fingers against the metal housing it recesses into. It is rather painful. It is impossible to carry the mat any other way due to it's weight and the position of the handle on the mat.The handle hinge (where it attaches to the mat) is toward the middle of the mat (toward the bottom of the handle when carried) this causes the spring to clamp the handle down onto your fingers. IF the handle was upside down, the weight of the mat would force the handle to stay open instead of clamping down. I tried spinning the mat around, but the handle being only ¼ of the way down a side, it is unreachable from the other end. So, it has to be carried that way.EXTREMELY painful to carry. The handle and housing are riveted into the side panel of the mat, so I can't remove it to spin it around to the proper place. The design engineers had an epic fail with the physics of carrying this monster. I doubt anyone even tried to lift a prototype. It makes me dread using it again.
Johnson
Reviewed in the United States on June 17, 2023
This is absolutely a wrong choice. It’s not firm and can easily fall apart and your gadgets can hit the floor. The top refuse to hold flat and you don’t know where to place stuff. Place it in the middle, it sinks in. Place it on the side it tilts outwards. It’s a disaster of a design
Greggory S.
Reviewed in the United States on July 3, 2021
Excellent case. Light weight, easy to assemble and very sturdy. It's my go to table. Love it!!
Matias Ceniceros
Reviewed in the United States on November 1, 2021
Great to dj on 👍🏻 Very stable!
Jules J.
Reviewed in the United States on June 17, 2020
UPDATE: two years in, and still a great addition for any DJ. I love this piece of DJ furniture. I was looking for something that was portable if need be, but also sturdy. I find it very sturdy, especially with my coffin on top. The coffin has two 1200s and a native instruments s4, altogether weighing at least 100 lbs and it seems to hold well. I would give it fives stars, the only reason I don't is the lack of any method of running cables through it and the lack of wheels (which i've seen on similar foldable DJ workspaces). There is enough clearance between top shelf and stand to run small speaker wire, but nothing else.
Earl Flynn
Reviewed in the United States on December 6, 2020
This is exactly what I have been looking for, a Sturdy table stand with no wiggle that stands high enough so that I don't have to reach down to touch my platters for back cues. Makes cutting, mixing and scratching a lot more comfortable and I can reduce a lot more needle skipping because of it's sturdiness. The only drawback is that there are no wheels for mobility and they should have had holes to run cables through and just cover it up with a screw in plate, the way OdyUSA does there cases. Otherwise perfect item that is priced well.
Douglas Tao
Reviewed in the United States on October 7, 2019
Setup in seconds. A little heavy but very sturdy construction. I added some stick on rubber feet so when transporting using the side handle it doesn’t sit on metal brackets.Depending on the gig, I can hang a sign/logo from front, or a 44” video screen.
Recommended Products
$79.90
$ 32 .99 $32.99