Your cart is empty.
Your cart is empty. How to get the bike rack organized may pose a challenge for you. Choose the Bike Hitch Wall Mount,no longer does your bike rack have to sit unattended in a corner,mount the receiver rack to a wall stud and store your rack directly on it instead for space-efficient storage!
This storage hitch wall mount not only stored such as bike,but as cargo carrier rack, fit 2 inches receivers.
Feature
-Holds Max 300 lbs
-Easy to Install: Includes 4 heavy duty lag screws to mount into wall
-Durable Steel Material, Sturdy Construction
-Fit all 2 inches receivers
-Widely Use: such as bike/cargo carrier rack,etc.
Package:
-1 x Wall Hitch Mount
-4 x Wall Lag Screws
-4 x Washers
Birk L.
Reviewed in the United States on March 18, 2025
Cheap materials and crooked welds. I did like that it offered a centered hole on the top to actually align with a stud.
M. Holm
Reviewed in the United States on February 9, 2025
Should not be installed directly on top of drywall. Even with a stud underneath. It will buckle. It worked when I had a piece of wood between the drywall and the mount, but when I removed the wood, it buckled pretty quickly. In the photo I put it back in the wood piece to try to straighten it out a little.
Tricky
Reviewed in the United States on February 22, 2025
Installation was straightforward and it has reliably kept my hitch mount bike rack off of the garage floor for a few years now. Nothing fancy, but really nice to be able to keep that rack off the floor as those racks are pretty awkward when not in use or attached to something. It provides a very solid mount when bolted to studs.
Rick
Reviewed in Australia on January 5, 2025
Exactly what I needed and it arrived on time as indicated when I ordered.
Gustavo
Reviewed in Mexico on January 2, 2025
Excelente para colgar tu rack.
Housa
Reviewed in the United States on May 27, 2024
Lightweight but rugged. priced right and built well. Good paint and easy to use and install. I’m going to order another one soon.Thanks!
Jersep
Reviewed in the United States on December 15, 2024
I bought it to store my kuat bike rack, it help me to organize my shop and was very easy to installed. Before it my rack was resting on the floor and it was a mess to walk around or to clean the shop, For sure I will recommend this device.
Gerardo
Reviewed in Mexico on October 21, 2024
Le queda muy bien al rack
ATonyB
Reviewed in the United States on October 17, 2024
Many different installation options.
buckeye1959
Reviewed in the United States on April 30, 2024
I installed this wall mount hitch on a cinder block wall in my garage with four heavy duty Tapcon concrete screws. It ain't goin' anywhere. It easily supports my 52lb Kuat NV 2.0 bike rack. As other reviewers have reported, the receiver (box) part of the wall mount hitch was not welded square/level on the steel mounting plate. Knowing that ahead of time, I marked the holes for the mounting screws after placing a level on the top of the receiver (box ), rather than on top of the mounting plate. My bike rack still looks slightly off kilter when it is in this wall mount hitch, but I suspect that is due, in part, to a little play between the male part of my bike rack and the female (receiver) part of the hitch mount. However, it’s not that noticeable, unless you really look at it. I could eliminate the play in the hitch and straighten my Kuat bike rack by tightening a knob on the bike rack, but I would have to loosen it every time I removed the bike rack from the wall mount hitch. I prefer to be able to just pull my bike rack out of the wall mount hitch and go. I mounted the wall mount hitch about 18 inches off the floor, so that my bike rack is at the same height as the hitch on my car. That way, there's virtually no lifting of the bike rack when moving it from the wall mount hitch to the hitch on my car.Be aware that if you plan to mount this wall mount hitch to a wood stud, you will only be able to get one of the three top screws into the stud because the two screw holes immediately beneath the top hole are farther apart than the width of a 2x stud. If you are mounting to a stud, you might be better off with a similar product that has two holes on the top with the second hole right under the top hole. If you're mounting it to a cinder block or concrete wall, you can use all the holes and the wall mount hitch will easily support a couple hundred pounds.Good price for this item. Kuat sells a similar wall mount hitch (made of aluminum) for more than 3x the cost of this one. It's prettier, but not 3x prettier. Also, the Kuat wall mount hitch can only be mounted to a wood stud, not a masonry wall.
Rafael Santini
Reviewed in the United States on July 28, 2023
This device holds my kuat bycicle rack in place with the bycicles on top and it does not shake or rattle. Highly recommend to use your existing bycicle rack as a wall mount to store your bycicles.
James Rankin
Reviewed in Australia on December 17, 2023
As advertised. excellent
Fernando
Reviewed in Mexico on November 24, 2023
Excelente producto, robusto y práctico si cuentas con espacio ya que sobre él se monta el portabicicletas. Recomendable
Recommended Products
