Your cart is empty.
Your cart is empty.10. 00mm Complete shim kit. 1. 85-3. 25mm in 0. 05mm increments with 3 shims in each size, Perfect for all your valve maintenance needs. Forged from 4140 steel, Laser etched size on top of shim for quick easy identification, 1-Year . For Models: 2013 - 2015 KTM 1190 Adventure Street, 2008 - 2015 KTM 1190 RC8 Street, 2014 - 2015 KTM 1290 Super Duke Street, 2008 - 2010 KTM 400 XC-W Bike, 2008 - 2011 KTM 450 EXC Bike, 2009 - 2015 KTM 450 XC-W Bike, 2012 - 2013 KTM 500 EXC Bike, 2012 - 2013 KTM 500 XC-W Bike, 2008 - 2011 KTM 530 EXC Bike, 2008 - 2011 KTM 530 XC-W Bike, 2008 - 2015 KTM 690 Duke Street, 2008 - 2015 KTM 690 ENDURO Bike, 2008 - 2015 KTM 690 ENDURO Street, 2007 - 2013 KTM 990 Adventure Street, 2007 - 2010 KTM 990 Super Duke Street.
Jesse Hooli
Reviewed in the United States on September 5, 2024
This had all the sizes I've needed to adjust my valves on my KTM 1190.
mike van den berghe
Reviewed in the United States on March 12, 2024
VERY GOOD PRODUCT.
M.G.
Reviewed in the United States on December 1, 2024
I ordered the 10mm set for my KTM 1190R and I was sent the 8.9mm set. I also checked the thickness of the 2.44mm and my calipers said it was actually 2.40. The size was consistently thinner on the few that I checked.
FRAYDERZ
Reviewed in the United States on April 28, 2024
Make sure they send the right size check the original manufacture size sticker under the Amazon label the first order they sent me a different size kit but the second kit I got was the right size
kylan middleton
Reviewed in the United States on July 17, 2023
Product is the perfect size to use with OEM retainers. HOWEVER, be aware that the factory retainers stretch and these not having the taper edge might cause valve clearance to get tighter. I recommend you order new retainers and changing them when reshimming. If you order these for ktm390 and run into issues feel free to reach out to me for assistance.
J.p.
Reviewed in the United States on June 12, 2022
I bought these for an upcoming valve adj so I haven't used them yet, but the couple I measured were true to size. There are 87 shims in this kit (3 of each size) and although hard to see even with the supplied magnifying lens, the size is laser etched on the top of each shim.
Customer
Reviewed in the United States on March 21, 2021
These were for a KTM 690 Duke and they were the correct 10mm diameter.Being in possession of a metric micrometer I measured all shims for correct thickness.I found all but one were in spec - ie. as close in tolerance as any OEM KTM shims I have used.I emailed Hot Cams, and they immediately provided a correct thickness replacement for the one bad shim.I rate this kit a good value.
Genaro
Reviewed in Mexico on August 7, 2020
Excelente, quedó perfecto para mí BMW F650GS Dakar 2006
John Keslering
Reviewed in Canada on February 2, 2020
Was purchased for a KTM 1190 valve shim adjustment. I would recommend this product to friends
p.lucas
Reviewed in the United States on June 25, 2019
I adjusted the Valves on my 2016 KTM 1290 Super Duke R. Instead of buying the individual shims from the dealer. you get 3 Shims per size in .05MM increments and you can buy a refill kit for $5 for any size. The sizes were pretty spot on but always measure the shim before you put it in as a good rule of thumb.The reason I bought this kit was because with 2 individual Cylinders you have to adjust one at a time. Which you have to measure the clearances, disassemble to check the incumbent shim size per valve, Reassemble, then repeat for the other cylinder. Or just make 2 different trips to the dealer, long story short extra work either way.With this kit I measure, adjust once per cylinder, no addition disassembly or extra trips to the dealer for individual shims.
bazyli debowski
Reviewed in Canada on November 16, 2018
As advertised. No complaints
Francis
Reviewed in Canada on April 4, 2018
Parfait
Stefan
Reviewed in the United Kingdom on January 4, 2017
Did first arrive at tje 3rd of January!
Recommended Products
