Your cart is empty.
Your cart is empty.HUB PART S/A HSL-876 SPROCKET DISHED 24T 1/8 CPFeatures-Genuine Sturmey Archer replacement partsItem Specifications-Size:24T 1/8-Color:CP-Use:Dished Sprocket-Gears:Dished Sprocket
Craig A Rogneby
Reviewed in the United States on January 28, 2025
Lowered my cruiser pedal ratio
Tony Cervantes
Reviewed in the United States on December 24, 2024
The media could not be loaded.
Customer
Reviewed in the United States on July 17, 2019
Had to add about 3 more links to the chain. Peddling is pretty easy now on the flats, and up inclines, great improvement. Can't go super fast though, like over 15mph.
john f
Reviewed in the United States on June 19, 2018
great for lowering the gearing on 3 speed bike. works on Sturmey archer and Shimano 3 speeds.
Customer
Reviewed in the United States on May 13, 2017
expensive
greg1174
Reviewed in the United States on April 29, 2017
Great addition if you are using a SRAM Automatix hub. It makes for just riding (cruising) around, which is all I really do, much easier. Hills are tackled much more comfortably. Does not shake or wobble. Upgraded the 18T cog that comes with it to this 22T version, during the upgrade I had to add a link to the chain. Previously, the chain wouldn't fit properly and required a tensioner to be added (my Titus Modena frame has a semi-vertical dropout), with this cog I could get the chain length perfect and did not require a tensioner, which since I only use coaster brakes it works a lot better and gives a little peace of mind. Also, there is a much cleaner look now. Front is a 46T and now a 22T rear, I use 1/8" chain with a single half-link addition.My setup is pretty much for only recreational riding and puttering around town, nothing terribly serious and top speed is not excessive. Though not measured I am guessing 20mph. Here is my setup:- Titus Modena Road Bike Frame, Carbon Fiber with Aluminum Lugs- Chris King Headset- Reynolds Forks, Carbon Fiber- Metropolis City Single Speed Crankseto Origin8 46T 1/8” Chainringo SRAM Link Chaino CrankBrothers 5050 2 Flat Platform Pedal- Taylor Wheels Wheel Set 700c, Alloy Double Walledo Nirosta Stainless Steel Spokeso Shimano Nexus DC-3000-3N Front Hub Dynamoo SRAM Automatix 2-Speed Rear Hub Sturmey-Archer 1/8” 24T Cogo Tannus Solid Tires (Black)- 350mm Carbon Fiber Seat Posto Brooks Leather B17 Saddle With Black Rails- 680mm Carbon Fiber Flat Bar Handlebaro Brooks Leather Wrap Slender Grips- Supernova E3 Pure 3 Front Light, Black- Supernova E3 2 Taillight, Black- Supernova ThePlug III USB Charger- Pinhead Locking Sets, Wheels and Seat Post
Elliot N
Reviewed in the United States on September 11, 2016
I install these on cheap one-speed coaster brake hubs, to change the gear ratio. To do this, I must remove the little "dust cover" ring, since this sprocket is a little thicker than the original. Removing this ring cannot possible have any measurable detrimental effect, methinks. By replacing the original 18 tooth cog with this one, the bike becomes easier to pedal, which is useful on rough ground. For this conversion, one or possibly two links must be added to the chain.
Footay
Reviewed in the United States on June 23, 2015
Product was as advertised. Haven't installed but it appears to be in excellent condition.
Recommended Products
