مره مره مزعج الغطاء مره قوي واذ سكرت الغطاء ما يبرد الحار يحتاج وقت طويل مرهمره ممتاز و جودة عالي بس عيبه الغطاء يخليك تكره مره مزعج للستخدام اليومي

1. Its temperature control is superior. It’s WAY BETTER than the high profile company associated with these things that sounds like an NHL trophy. I guess it’s because that in addition to the insulated steel, it has some kind of rigid layer on the outside that has to be thicker or something. Really keeps stuff cold/hot.2. Its lid doesn’t screw on, rather it plugs into the top, quite snugly. If you’re like me, you might like the spout slightly offset to help prevent spillages when reaching for and drinking ice water in the night. Can’t control where the spout goes precisely with a screw top. But you can with this one. You can make the spout sit wherever you want it to. It’s such a game changer for me. It’s also way easier to pop the top out if you want to eat the ice in a cold beverage. Unscrewing a top is a royal PITA.3. The spout has a more controlled pour that both keeps me from chugging too fast, but also (for reasons I don’t understand) distributes beverages better inside the mouth and quenches thirst better. Sounds weird, but it’s true.4. I’ve owned multiple different brands—including super expensive ones—but this one is the best, hands down. Whoever designed this thing sat down, took their time, and really took into account a bunch of variables, which always impresses me.5. It just can’t be beaten for the money. FACTS. I seldom give bad reviews, but the good reviews I give are because I’m so satisfied with a product, and this cup certainly met that metric with ease.

Just wanted something to hold a ton of water. The handle feels a little awkward, but isn't bad. Smaller hands might have issue wrapping around the thicker part of the cup. Dual straw/hole is nice to have. Straw makes this an oversized sippy cup, so you'll have to abandon a bit of your pride for that sweet hydration. The flip-up lid does fine, but it is definitely much slower than the straw, and I'm all about that sleek, aggressive hydration where I drain half the cup in a few moments.The rubber holes do a good job of allowing pressure to even out while you drink, while not letting any liquid through. Water also stays cold even after letting it sit around for a day, but no comment on the insulation in hot environments. Have yet to stick it in a hot car for eight hours.Sticker area is a bit tough to work with if you have ~3inch stickers. I'm not picky about my $3 sticker getting a bit messed up though.

Es muy bueno, no se le salen los líquidos y conserva por mucho tiempo el café caliente y los hielos

I love the look of this cup! So pretty. So far it's working great; no leaks, straw has really good flow, rubber on the bottom keeps it from slipping and it's a solid, sturdy cup. The handle is strong and I have no worries that it will break off. It's 40 ounces so it will get a little weight to it when full which could make holding it by the handle a little challenging if you have weak wrists but I don't find it to be a problem. One concern I have is that the leak proof lid just pushes in instead of screwing down. The seal is a rubber ring around the plastic lid and while it's working fine for now I worry that over time all wear of taking the lid on and off will wear down the rubber ring. I will be paying attention and if it starts to leak I'll update the review with how long it took for that to happen. It also does a really good job of keeping my water cold. I always add ice because I hate tepid water and even after the ice melts my water stays cold for a good while. It's not as good at it as one of the enclosed water bottles (like a Bubba bottle) but it still does pretty good. I use mine around the house so it meets my needs but I do take my Bubba bottle with me in the car. That thing can sit in a hot car and still have ice in it after a few hours but this cup will not do that, probably due to the type of lid. Overall I'm pleased with it.

I use it every day, all day. Gotta meet those water goals! lolI followed the instruction of another buyer and was able to pop the spout out to wash the silicone gasket. Put it back together no problem. If I leave ice in it overnight it's still there in the morning. Compared to that other stupidly popular 40oz mug.... This one is cheaper, leak proof and the handle is solid. No it doesn't fit in the cup holder all the way, but I jam it in a little bit and it's close enough lol 😂

The media could not be loaded.

Es justo lo que quería, el tamaño es excelente. Conserva el frío por muchas horas, es muy práctico, cabe perfecto en el cup holder de mi camioneta.

TLWR;Great cup that works as stated, unless you get a faulty lid, which Hydrapeak will warranty, or you can play the exchange game with Amazon until you get a good one.Get one if this cup fits your needs, and if you can deal with a little adversity if needed!----------------------------------------------------------I'll start by saying that my go to insulated cup is my trusty Bubba Hero XL that has lasted years of abuse and is still going strong and I will always recommend it. The lid is leakproof and I use a silicone straw, but to close it requires pulling the straw out (not always an option) or shoving the straw into the cup before closing and having to take the lid off to retrieve it. Other features that it has that I like are a silicone/rubber bottom and an open bottom handle (which I use to hang it on my work cart or even a pant pocket).I was looking for a larger cup with all the same features as the Bubba AND also a built in straw that's still leakproof. This has it all, but the reviews make it seem like it's too good to be true.The first one I purchased works very well. It's the bare steel model and it came with a small dent in it's side. I can't knock Hydrapeak for that, because we all know the randomness/barrenness of Amazon handling and packaging, lol. It is only a little larger than the Bubba, and it's mostly in the bottom diameter which means it'll fit in less cupholders than the Bubba. It fits in my car's cupholder just fine. I decided that if the dent didn't compromise the insulation, I'd keep it.My first test was filling it up 7/8's full of tap water, remembering to pop the sippy end as I installed it (remember, ANY Leakproof lid from ANY manufacturer NEEDS to be vented when installed) and leaving it upside down on a silicone drying mat for an hour to check its leakproof-ness. Verdict, 100% Leakproof.Second, for insulation effectiveness, I filled it 1/3 of ice and 1/2 of tap water (leaving 1/6 of the cup free), installing the lid and set it on the counter for 24 hours. It still had a little bit of ice left after that, so with proper cooling (chilling the interior of the cup before adding ice and refrigerated liquid) this cup should easily keep your drink cold for the claimed 34 hours. 👍Now we come to the dreaded straw. When I first had the cup in hand, I flipped it up and took a pull. It felt like sucking on a straw against my hand, a tight vacuum. I noticed that the silicone vent was real tiny. Popping the sippy lid released the vacuum, so I said, "not a big deal if it helps the straw work properly." After testing the leakproof-ness, I flipped the straw and took another pull and it worked. The vacuum effect had almost vanished, only noticable when you flip the sippy lid open. When I finish a cup, the vacuum returns. None of this is a deal breaker for me.Built-in flip straws are very uncommon in cup lids. Most adult drinking vessels with them are bottles and that's not what people who are looking at this cup are looking for. If you get one built like mine, you shouldn't be disappointed. BUT if you don't get one like mine...* Here's the asterisk.I bought a second one for my mother, in the Rainbow color. The only thing I initially noticed different was the rubbery coating used on it. Has a great feel and seems durable.The next day I got a call from her telling me the straw wasn't working! So I stopped by to look at it. After close examination, I discovered that there are 2 versions of the 2 way lid. In picture 1, my lid has a large gasket that wraps around the 'nozzle' area for the straw which actually protrudes into the cup deeper and comes with a shorter straw. The rainbow cup lid in picture 2 has a small donut shaped gasket that had dislodged along the way. The flipper end didn't look like it was seated correctly as well. Even getting the gasket in place didn't correct it. It still didn't work. So it was time to contact Hydrapeak for a new lid.As I sent word for a replacement with Hydrapeak, I ordered a third cup. I know, crazy, but Amazon has an amazing return policy, so why not find out how bad it can be ASAP? Well, the second rainbow came with the same small gasket lid, but everything seemed installed correctly and it worked just like my first one did.Hydrapeak did contact me back, apologized and said they'd send me a replacement. We'll see how long that takes and I'll update this if and when I get the replacement lid or if there are any other issues.****Update****Received the replacement lid very quickly. They said they'd send me shipping info first, but it just showed up a week after the correspondence. It is the same style as my first one.Hydrapeak, you rock! ⭐⭐⭐⭐⭐