Your cart is empty.
Your cart is empty.Product Description
Main Features of ICC-500T CO₂ controller with S01 sensor
● Plug and play, simple operation.
● Dual relays, are able to connect with the CO₂regulator or generator and the exhaust fan simultaneously.
● Dual readouts, displays the current measured CO₂ concentration and the set CO₂ concentration simultaneously.
● CO₂ calibration.
● Programmable high/low CO₂ concentration alarm.
● Widely applied in ventilation system, building control and HVAC equipment.
Specifications of ICC-500T CO₂ Controller
- Input Power: 100~240Vac 50/60Hz 10A MAX
- Output Power: 100~240Vac 50/60Hz 10A MAX (two sockets)
- Disconnection Method: Type 1B
- Pollution Degree: 2
- Rated Impulse Voltage: 1500V
- Automatic Operation: 6000 cycles
- Ambient temperature:
- Working Environment: room temperature
- Storage Temperature: 0℃~60℃/32℉~140℉
- Storage Humidity: 20~80%RH (No freezing or condensation)
Plug the CO₂ Controller and the sensor
When the CO₂ sensor is inserted, the controller will take about 8 seconds to identify. Then the PV window will display 8888 and blink, the SV window will display the CO₂ concentration setting.
Waiting for about 120 seconds
After 120 seconds, CO₂ module works stably, and the PV window stops blinking and displays the measured CO₂ concentration. Within 120 seconds, the buttons cannot be operated , the indicators of WORK1 and WORK2 are off, and the WORK1 and WORK2 have no output.
Plug your devices into the socket of ICC-500T
The controller will automatically identify and convert the CO₂ regulator or generator and the exhaust fan. WORK1 is the output of the CO₂ regulator or generator, and the WORK1 indicator is the WORK1 output status indicator. WORK2 is the output of the exhaust fan, and the WORK2 indicator is the WORK2 output status indicator.
WORK1 Only for the CO₂ regulator or generator, WORK2 Only for the exhaust fan.
Follow the instructions to finish the setting
There are three modes can be set, for more information about setting, please refer to the user manual on the listing page.
The difference between S01 and B01 sensor
Multiple uses
Bill Head
Reviewed in the United States on October 13, 2023
Super easy to set up and use perfect for any place where controlling CO2 is important.Perfect for mushroom or plant cultivation.I will be using this to control CO2 extraction fans in my mushroom fruiting chamber.
Michael M.
Reviewed in the United States on August 30, 2022
Have had units for several months in preparation for their use…I in fact purchased another one recently to complete my system, but once in use I nearly killed 600+ plants due to mis reading by these units. I fortunately had triple redundancy with multiple additions CO2 monitors, which alerted me to the 2300 ppms of CO2 in my room. After cross checking all the rooms I found that only one of the five actually read close to the other monitors. And yes…I moved things all over the place to confirm. They should refund my money. You can clearly see that I’ve been purchasing new units (different brand of course) on Amazon to replace them. Could use the money to finish buying new Accurate units.
Qui💯💪🏾
Reviewed in the United States on July 12, 2022
Best controller for this price range even beats out some of the more expensive ones..the fact that it controls the exhaust fan is a HUGE UNDER-RATED BONUS..easy to use features..put it on the same timer as your lights(double socket timer)..put the sensor mid to low on the opposite side of where exhaust is..set it forget..works GREAT. BUY IT.Thank you inkbird.
Capt. Cannabis (~);}
Reviewed in the United States on September 11, 2021
I got the S01 sensor and have been using it for about a year now. The complaint I would have is how slow the controller reads and updates. It works well and does exactly what it's supposed to. I've realized if you turn your co2 as far down as it will go but still flow (like a just a pube above off) it works just fine. I don't even see any movement from the tiny bead in the regulator but the gas is flowing slowly.The slow flow of gas into your grow allows the controller to catchup. I set mine at 1100ppm and it will turn on about 1050 and turn off at 1100 and fill the grow to about 1600. Takes a while to get back to 1050 and the cycle starts again. Worth the cheaper price and works.
Barry Rodwell
Reviewed in the United States on May 11, 2021
The instructions don’t make a bit of sense and the how to video on YouTube wasn’t much better. It took 3 or 4 tries to finally get it to work .it’s supposed to only go 10 ppm above or below the set value but it goes way over the “setting “Spend a few extra dollars and get a controller with directions you can comprehend. Wouldn’t recommend it
Jaime
Reviewed in the United States on March 24, 2021
This CO2 controller works very well and is accurate. It is easy to use and set and is accurate in its readings and control. The one thing that I would recommend is to have a daylight on/off sensor as plants only utilize CO2 during the daylight hours. I am able to use a timer to act in conjunction with the daylight hours to turn the unit on and off, however it would be more efficient and accurate to just have a light sensor built into it.
Joe C.
Reviewed in the United States on February 21, 2021
Very easy to use and highly configurable. Ready to go out of the box, but the advanced features of this controller are leaps above the competition. The timer is not a simple 7-day timer... it is an advanced configurable repeating cycle timer not found on other controllers in this price range.That said, the instructions are "wordy" and confusing, but complete. No photocell or fuzzy logic and neither are necessary or better. This is a top-notch controller I highly recommend!
Val
Reviewed in the United States on January 13, 2021
Another great product from Inkbird!I’ve used Inkbird thermostats and humidistats for years in my mushroom growing operation. These are the best value that I’ve ever found. They are accurate, reliable, AND inexpensive!This CO2 controller only took a couple of minutes to setup (most of that time is just waiting for the initial CO2 readout) and it seems to be quite accurate as it shows very similar readings to my other CO2 meters.Last I checked this is the best deal available for a CO2 controller.
Recommended Products
$59.95
$ 26 .99 $26.99
$49.95
$ 25 .99 $25.99