Your cart is empty.
Your cart is empty.Product Description
Inkbird Digital ITC-308 WIFI Temperature Controller Heating and Cooling Outlets
monitor the real-time temps, check the history data and change the parameters, all work on the app
- WiFi App Control
- Heating and Cooling Outlets
- Alarms at High / Low Temps
- Celsius (℃) or Fahrenheit (℉)
- Power: Voltage: 100~240Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac).
- Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
- Temperature measurement range:-40℃~100℃/-40℉~212℉
- Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)
Cheer !
Lovely creatures
Warmhearted companion
Fvd for saw
Reviewed in Mexico on March 5, 2025
no lo probe porque no me arriesgue en usar un producto usado asi que no se ni como funciona
Kim
Reviewed in the United States on June 4, 2023
Hey !!! This little gadget is the perfect way to set up a "perfect world" for "baby chickens". Keeps them right on the money as far as their special needs (warm protected space) at a few days of age. Keeping the room temperature for baby chickens at a prescribed level is so very important to protect them until their feathers come to grow. This equipment keeps their cage at the proper 95 degree temperature for the first week ..... followed by the ability to slowly drop that temperature a few degrees weekly for the first 8 weeks of their lives. And, the ability to download an "app" and moniter that warm cage without being there was an added gift. So well worth the sum of money paid to protect those little guys.
Robert P.
Reviewed in the United States on December 17, 2023
I put this in my greenhouse rigged up to a few heal lamps since we are coming up on January soon.. just as an insurance policy to make sure it doesn't go *too* far below freezing this year.. I was hoping that it had an option to switch the 'cool' outlet to a heat one so i could run 2 lamps without a splitter, having no need for any cooling, but no luck there. They never advertised it did, so no marks against them on that front though.I will say that if you are going to use it in a greenhouse, face it away from the sun, or shade it somehow, because after about a month so far, it's absolutely *baked* the display.Other than that, the app is pretty nice and fairly intuative once you get it set up, although it took some effort to get it to connect. Probably would have been easier to plug it in inside by my router to set it up, then move it outside once I did. If you run into issues connecting, use the 'manual' way where you sign your phone into the thermostats 'network' instead of it signing into yours.And as others said, once you have the app just use that to set the temperatures, I didn't even bother trying to set it on the device itself.
catrina elia
Reviewed in the United States on March 5, 2021
I have used a lot of temperature controllers over the years for my home brewery, and the Inkbird WTC-308WIFI is the best. Priced much less than the competition, it has worked very well over the years, and I have found the temperatures to be accurate. I also like the bright, easy to read display. When I had a problem getting my unit to connect to wifi, I was able to get prompt support online to resolve the issue.
kdog
Reviewed in the United States on December 12, 2020
I used it to retrofit a 30+ year old hot tub so I can control the thermostat remotely instead of having to remove the access panel every time I want to turn it down. I needed something with a heat probe, wifi, and an electrical output. This is the only device I could find that does all three. The app is very user friendly and automatically detected that the signal was weak and switched over to manual mode to link to my phone during set up. The cost of this plus the other parts I needed was less than a junky replacement thermostat.
Cecely Valderrama
Reviewed in the United States on April 10, 2019
I have owned 3 Inkbird units (one in my large tank, one in my smaller tank, and one in my QT tank). I was originally introduced to Inkbirds by a wonderful blog post by Aquarium Store Depot who talked about creating an aquarium heater system that has multiple fail safes. Their blog post talked about using a controller like an inkbird as the central brain of the whole heating and cooling system. I followed their recommendations to the T with two heaters and a controller. The old models are amazing and very accurate. When I heard about this new wifi model I just had to try it.I put this controller on my new reef tank setup. After I installed it and fired up the app, I was impressed with the fact that this app can monitor ALL tank systems in your home. This is a great feature for those of us who suffer from Multiple Tank Syndrome (MTS). I can now go quickly into the app and see the temperature of the tank. I can access all the settings in the tank if I want to make an adjustment. I can also pull up charts to see if my temperatures swing throughout the day. This was definitely worth upgrading to!My only complaint is the charts. They have a weird naming template so I can't understand what day it charted, but I love accessing everything on my phone now. The fact that I get mobile alerts if my temperature goes too low or too high is priceless. Heater failure is such a common reason for a livestock wipe out in an aquarium. It's worth your money to invest in one. I also got a Wyze camera so I'm set with complete monitoring when I'm traveling or away from home. Thank you Inkbird for making another great product. I'm looking forward to upgrading my other tanks so everything can be on the app :).
doubleldom
Reviewed in the United States on August 17, 2017
I've been brewing ales for 8 years and thought Id like to take a crack at making a lager. The thing is I did not have a fermentation chamber and needed to maintain a constant 53*F temperature. This device coupled with an empty kegerator did the trick. Device works exactly as advertised. The functions are simple, I did not even need to review the instructions to setup my fermentation chamber. I have set the temp to 53*F with a +/- range of 3*F. When the temperature climbs to 56*F, the kegerators compressor kicks on and stays on until the temperature reaches target again. There is also a safety function for delaying the compressor which I have set to 3 minutes to prevent the compressor from switching on and off repeatedly. I can say for the value, I am extremely satisfied with this products performance. Now I hope my lager turns out just as satisfying.
Recommended Products