Your cart is empty.
Your cart is empty. This rotary dimmer switch will be a valuable kit for those who want to turn normal lamps to dimmable lamps. Handy to operate. This inline switch will be a perfect replace of your broken lamp switch, saves your budget to buy a new lamp.
Make turning lamps on and off at a convenient distance from your chair or bedside by installing an in-line cord switch.
Double pole single throws switch, ideal for controlling 1 circuit.
The inside of this switch has brass contacts.
Popular used in home lighting or industrial machines. Ideal for operating electrical lights, fan or high power appliances
How to Install an In Line Switch
Slit the cord where you want the switch.
Cut apart the line and insert the cord into the wire channel on the switch bottom.
Press the switch halves together and tighten the switch screw.
Specification:
Input Voltage: 120V
Dimmable LED: 2W- 25W
Dimmable CFL: 2W- 25W
Incandescent/Halogen Bulb: 5W-80W.
Material: Nylon, Brass
Type: Rotary dimming
Color: Black
Size: 4.02x1.18x0.94 inch(L*W*T)
Rating Power (Max.) : AC125V 30A, 250V
Package Contents:
1x Inline Dimmer Switches
Jaime T,
Reviewed in the United States on March 23, 2025
Generally happy, seems well made, easy install. Notes: dims LED nicely (no flicker), but doesn't dim down to 0%. In other words, instead of 0-100% control, more like 30/40%-100%. Not a huge deal unless you wanted to dim down to a glow. Also, schematic shows load (bulb) being wired on end nearest dimmer knob, but circuit board shows load wired to opposite end of switch. I chose to follow printed circuit board load location and worked fine. Knocked a star off for this error in instructions
Malcolm Hamilton
Reviewed in the United States on January 11, 2025
I bought these to replace a failed dimmer. I bought the 2-pack because of the cost per saving and because I imagine I will want to install the other on another fixture.The installation was straightforward and the step-by-step instructions were thorough. The rotary dimmer is easy to use and very good. The white color matched the lamp cord. All cool!
M S*WAY
Reviewed in the United States on September 19, 2024
I replaced a cracked inline dimmer on a decorative table lamp in the living room. The original was soldered in place so I was pleased to find this one that does not need soldering. It was easy to cut the cord and replace with this one. Tools needed were a wire stripper and very small screwdriver. The instructions are clear. But there is one error you should know about. The illustration is reversed where it shows the load side and the lamp side. The actual dimmer is what you should follow. Load goes to the outlet and the other side goes to the lamp. To simplify installation you strip the ends of the wire, insert them into slots and crimp them down with screws. Two issues: the slots are fairly shallow. So strip only about 3/16" of insulation. You don't want bare wire extending outside of the slot. Second is that the binding screws are quite small and the slots won't fit a standard screwdriver. So be sure you have a set of jewelers screwdrivers on hand. Other than that, the finished install is quite clean and safe. The dimmer works well and does a linear dim. My lamp happens to still have incandescent bulb so I cannot comment on dimming an LED bulb. But it is rated for them. I recommend this dimmer.
Alyson Moy
Reviewed in the United States on March 8, 2024
Giving this 5 stars because it WORKS and has a smooth dim (not incremental) and I had a very hard time finding an LED compatible lamp dimmer that didn't require soldering or ordering from somewhere special.Other reviews mentioned the bad instructions so I was prepared to do some problem solving for the installation. You will need a small electronics size phillips screwdriver fyi. The first problem was "separating the parts". You need to take the dial off...it just pops out from the outside but it's very firm and keeps the board attached on the underside so you need to take that off to get the board out. Then for wiring you need to read the markings on the actual board. One side is marked load and the other N (neutral) and L(line). The wood type screws are fine - I think they actually dig into the plastic (the plastic didn't seem to be threaded). Regular 18/2 type lamp cord fit in the openings okay. The plastic case top and bottom does have a slightly bad fit together but it's fine.
Noli Castillo
Reviewed in the United States on December 24, 2024
It’s easy to install and it works but its not dimming enough.
StephenB
Reviewed in the United States on November 15, 2024
Simple installation. Plastic case felt less then quality. Time will tell!
stephen m.
Reviewed in the United States on April 27, 2024
Doesnt work as advertised. Not really a dimmer, more like a switch. Full bright on this is much less than just normally plugged in. When the dial is rotated to dim it instantly fades to very low and when you try to increase the brightness, it starts to flicker. Very very poor dimming range. Its junk, avoid it and as others pointed out - wiring instructions are wrong.
Jeff's
Reviewed in the United States on November 30, 2023
I was looking for an inline dimmer for a couple of lamps. This was just what I needed.It was a simple process to install, you only need wire cutters, wire strippers and a small Phillips head screwdriver. Directions are simple to follow. I’m a DIY’er so it took me about 10 minutes start to finish to install one.if you are using this with an LED bulb it must be the type that is dimmable (it will say “dimmable” on the box and on the base of the bulb).This is truly a variable dimmer from full Off to full on.
Recommended Products
