Your cart is empty.
Your cart is empty.Product Description
Features of these ANL Fuse Holders
- (2) ANL Fuse Holders with 300A Fuses
- Securely Holds Fuse and Terminals (Use with 0,4,8 or 10 Gauge Ring Terminals)
- Crystal Clear Cover
- High-temp ABS Base
- 2 Screw Mount Holes
mario quinones
Reviewed in the United States on March 9, 2025
Ok
Christopher P.
Reviewed in the United States on January 31, 2025
Right On
Guy
Reviewed in Canada on August 27, 2024
Holder does what's needed. Easily installed.Cannot speak for the actual fuse as it has yet to trip, although ya gotta have faith on a product like a fuse :)
Moriah Diamond
Reviewed in the United States on July 16, 2024
Fit to size, good quality, easy install
Luke
Reviewed in the United States on March 27, 2024
The InstallGear 0/2/4 Gauge Ga ANL Fuse Holder with 100 Amp Fuse (2 Pack) is a practical solution for safeguarding your electrical system. The inclusion of two ANL fuse holders, each equipped with a 100-amp fuse, provides reliable overcurrent protection. Designed to work seamlessly with 0, 4, 8, or 10 gauge ring terminals, this product ensures a secure connection for your electrical setup. The transparent cover offers a clear view of the fuse and terminals, allowing for easy inspection and quick identification of any potential issues. Crafted with a high-temp ABS base, this fuse holder is durable and built to withstand challenging conditions, ensuring long-lasting performance. Installation is a breeze with two convenient screw mount holes, ensuring a stable and reliable fit in your system.
Abram Arciniega
Reviewed in the United States on March 25, 2024
Great product and price no complaints used it for 0 guage wire and 4 guage wire both fit good
Stephen Wootton
Reviewed in Australia on September 3, 2022
Good quality product that works well in my installation.
Francisco O
Reviewed in Mexico on April 1, 2021
Excelente calidad, muy buenos acabados, cumplió mi expectativa.
Customer
Reviewed in Canada on August 28, 2020
good n fast
Joe Bennett
Reviewed in the United States on August 7, 2019
I do alot of urban camping in my Ford Ranger. I just refuse to pay the outrageous prices for a hotel room for the plesure of getting into a bed that a stranger just crawled out of a few hours before. I have everything that I need but a shower. Amyway, I recently added to my comfort by adding a inverter and battery system to my "camper". Having experinced a battery cable malting while driving in the past. I chose not to experince that again. When I decided to install the power system putting fuses inline was a needed necessity. These fuses and cases are prefect for my application. I put one fuse from the truck battery inline to the new continuous relay then I placed the other one inline from the relay to the inverter battery. Now in the event that a short or a power surge should happen. My truck won't burn down to the frame. I realize I could have set up the system without putting the fuses in. And a lot of motorhomes and campers are set up that way. And alot of motorhomes and campers burn to the ground on side of the road. For the price you can't beat the safety these fuses provide. And, as the system ages I would rather know something is wrong with the system by blowing fuses than finding out by burning my truck down.
Rich
Reviewed in Canada on December 11, 2019
Does the job and can support 1/0 lugs.
Paul
Reviewed in the United States on September 6, 2018
Really nice looking and no complaints on quality either. I used these in dual battery circuits coming right off the optima batteries house and starting sources. In the other direction I used circuit breakers which cost more but are more likely to actually be potentially exceeding the amperage draw and needing to be reset. The fuses are for a short circuit in the 01 awg wires between those batteries which would be catastrophic and likely a fire if not protected. These mount easy and are a clean and nicely designed fused device matching the wiring work, busses, terminals and actual auxiliary fuse panel and connections to an auto regulating charger and manual battery switch for either or both in emergency. I think they are a nice compliment to the job as a whole. It’s mostly blue sea and namebrand car audio, both respectable vendors so these wouldn’t look the part if they were cheaply made or junk. 4 stars, as I just got them and gotta give an accurate review. I’ll update to 5 if they’re still working and looking good in a few months. I likeStuds versus the setscrrw type mount. Studs are ideal and don’t seem to work loose, but they’re usually stainless steel it seems and crossthreading or overtightening can ruin them quickly. A careless customer would be an issue not these products or the hundreds of high end amps and speaker enclosures that use the same method of attachment, battery switch gear and marine electrical. The stainless is less forgiving but less corrosion prone. I’ll take the corrosion protection any day!
nosympathy
Reviewed in the United States on November 7, 2018
Edit: so first time since installing these I really got on it with my truck and was hitting 3K rpms. I blew the 150amp fuse I put on my 136amp stock alternator. Also noticed both 100amp fuses had blew on my 90 amp grid heaters. Not sure when those blew but guess it's not been working (only cold enough one day to tell)Going to try and remember to put the remaining 150amp fuse on one 90 amp grid heater and see if it blows.Overall the case the fuse goes in is fine, not really happy about the fuses blowing so easily. Other people run the same size ANL fuses but different brands without trouble.I know it's better than blew then held out to 400-500amps without blowing, but it also caused me to have to pull over on the highway and remove the fuse for the alternator and bridge the wiring.*Original review:I ended up getting 3 of these. 2 100 amp which are on the right in my picture and 1 150 amp which is the far left. The two1000 amps are to run the grid heater on my Cummins and the left 150 amp runs from the alternator. I used 4 gauge wire on the alternator and 6 gauge wire on the grid heater.I was redoing the wiring in my truck and having trouble getting correctly sized fuse link wire where I didn't need to buy 25+ feet of for a huge price.This appears to work fine and is easily seen or opened in case a fuse does blow.I gave it 3 stars for durability as the soft clear covers will probably not hold up.
Recommended Products