Your cart is empty.
Your cart is empty.Product Description
Custom ethernet cables made easy
Purchasing ethernet cables can be expensive and pre-made lengths are not always suitable for your needs. ITBEBE RJ45 Pass Through Plugs let you quickly and easily create category 5 cables in your preferred lengths. Our clear 1-piece design makes wire sequence verification a breeze, speeding up terminations and reducing scraps and waste. Time is money, and ITBEBE Cat5 Connectors save you both.
Reliable, compliant performance
ITBEBE RJ45 Connectors are suitable for use in all category 3, 5 and 5e data networks. They work with virtually every model of RJ45 crimper tool and 24AWG cable. Because they reduce the distance between wire twists and contacts, electrical performance is enhanced. Note that the maximum cable length of Cat-5 and Cat-5e ethernet cable should be 328 feet or 100 meters.
Satisfaction on product is our top priority
We insist on the highest quality materials and manufacturing processes to bring you these premium ITBEBE RJ45 Crimp Connectors.
Beautiful and strong cardboard box to protect the product from damaging and high aesthetic value.
8P8C Plug for Solid or Stranded Wire
8P8C are used in computer networking & telephone applications, where the plug on each end is an 8P8C modular plug wired according to a TIA/EIA standards. Most wired Ethernet network communications are carried over Category 5 cable with an 8P8C modular plug crimped on each end.
24 AWG optimal performance
All 23 and 24 AWG cable will work perfectly with solid or stranded cables
Maximum Insulated wire outside diameter is 1.00mm.
RJ45 cat5 connector allows twisted pairs to be put in one end, and fed out the other
Our clear pass-through connectors permit technicians to identify wiring order. These make professional-looking crimps and prevent both accidental and disconnections.
Short User Manual
Ember Moon
Reviewed in the United States on August 26, 2024
Did exactly what I needed it to do. Only Advice: use a good crimper.
Joshua
Reviewed in the United States on December 11, 2024
These were gold tipped not plated. Looked to be more nickel
Kyle B.
Reviewed in the United States on July 3, 2021
I myself am in no way new when it comes to wiring up ethernet cables. When the the ability to thread the wires through the connector to ensure a snug fit without being precise was added, I rejoiced. These particular connectors aren't fragile to the point of shattering when breathed on, and have no connection issues / flashing inside the connector preventing easy installation.
Jassier
Reviewed in France on September 12, 2019
Pour faire des fiches rj45D’une simplicité à faire
Customer
Reviewed in the United States on May 30, 2019
Makes making a cable much easier. The only thing I don’t like is that you have to leave a little room to cut off the ends so that they don’t stick out so far they won’t work.
francesco
Reviewed in Italy on December 12, 2019
Plug molto semplici da crimpare anche con una pinza standard.Il fatto che il cavo sia passante permette di essere sicuri che tutti cavi siano stati crimpati e che la sequenza sia rispettata.
MOMO 45
Reviewed in France on October 31, 2019
Acheter pour la réparation de câble dont les languettes plastique sont cassées.Câblage plus rapide,facilité de placer des conducteurs se croisant,respect des codes couleur sans crainte de voir les fils se déplacer en les insérant dans le connecteur,prix abordable vu le prix de câble dans le commerce.Satisfait de mon achat.
Mika
Reviewed in France on August 9, 2018
Ce système de sertissage est très rapide et efficace. Je ne regrette pas du tout l'achat ! Pensez à acheter la pince qui coupe les câbles dépassant de la fiche au sertissage et c'est encore mieux !
Manuel Garcia Romero
Reviewed in Spain on July 6, 2018
Con esta ficha RJ45 cualquiera que no sea tecnico puede hacer una conexion segura sin sorpresas. Me parece un invento excelente.
dragonfly
Reviewed in the United States on February 23, 2018
unlike all the other Cat5 connectors i've used, these allow you to push the Cat5 cable all the way through the connector and out a slot in the end so you know the wires are all lined up correctly in the channels, then you cut off the end cleanly and carefully pull the cable back through until it is no longer protruding from the slot... if you pull it back in too far the crimp may not contact all the wires, and also outer plastic covering on the cable may not get crimped leaving you with a floppy / loose connector... if any cable is protruding from the end slot when you crimp, it will prevent the connector from plugging in all the way (to whatever you are plugging it into) and you won't be able to cut it flush with wire-cutters - although you can carefully cut it flush with a razor blade...
AllTold
Reviewed in the United States on October 10, 2018
I've been searching for the correct and best connectors to use with Cat6a (SSTP/SFTP) Shielded Ethernet Cable. This type of cable has 1.0mm (actually 0.94mm) diameter of individual conductors... that's 1mm measured at the insulation of 1 of the 8 individual conductors. These connectors are a perfect fit for my cable.Load bar style connectors have that separate little piece that is used to organize the conductors within prior to inserting the conductors into the RJ45 connector... it's a kind of a hassle to get to assemble it all, hold it together and then crimp it.With these connectors I just organize the conductors and feed them through until the cable housing is where I need it and then just crimp the connector. Everything stays put while crimping so I don't need to maintain insertion on the conductors, keeping them bottomed out in the connector, while crimping.The 3 prong bite is a bonus and the complete gold plating is comforting to know that it's there.
Eric Gonzalez
Reviewed in the United States on December 15, 2017
Time its money!!When installing Surveillance cameras and have to run 100ft off cable you have to cut to have a clean looking job. The problem its that not all cable are solid copper so using regular RJ45 I keep struggling. I decide to purchase this and give it a try. So far I like it I can see the colors in the other end in case one wire decide to jump in the wrong position. If you don't have the right tool to cut the end just pull back the wire and then crimp it. After a small job off 5 cameras this product fail on me. In the past 3 year I have never return to a customer before the 30 day warranty I provide. My last job I have to remove the RJ45 on all cameras twice. Replacing 10 RJ45 plus time and money consuming. I don't want to give up on this product. I purchase the crimp tool from EZ company seem ok tool but for some reason RJ45 fell lose. I will use it one more time if I return before 30 day warranty, this product its off the list.Updated: 1/6/2022Do not used this pass through prong if using non-cooper wire. You will have a lot of problems with signal.The review on top I was using LaView provider cable. "cheap cable" ones I start using Cooper wires I have no problem with this prong. The last couple of year I have not return to a customer because signal problems. Also get a crimp with good quality. I replace my crimp to a better one and working strong. Time is money and this product will save you money and time.
Peter Hawtrey
Reviewed in the United States on November 27, 2017
If I can connect these to a CAT5 cable successfully, you can do it too. I've struggles with other schemes but these work best. I did not even need a magnifying glass to thread the wires into the connector. And I am 76 years old! But I do it by cutting the cable cover back about 6 inches and then threading each wire into the connector one at a time. Then just pull them tight and use a crimper that cut the wires as well.
Recommended Products