Shopping Cart

Your cart is empty.

Your cart is empty.

JJC 3-in-1 Wireless Flash Trigger & Shutter Remote Control with Two Receivers Kit for Canon Rebel T8i T7i T6i T6 T5i T5 T4i T3i SL2 SL1 EOS 90D 80D 70D 77D 60D RP R

Free shipping on orders over $29.99

$32.99

$ 15 .99 $15.99

In Stock

About this item

  • Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Canon (replaces RS-60E3), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs.
  • 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency.
  • Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger.
  • The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc
  • Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.



Product Description

Flash Trigger

The JJC JF-U2 Wireless Trigger Kit provides one transmitter and two receivers for a wireless solution to trigger off-camera flash units, studio lights or a camera’s shutter at distances up to 100’ (30m). This allows you to work with more freedom as the JJC JF-U2 does not require line-of-sight alignment.

The devices operate on the 433MHz frequency and have 16 channels to ensure there is no interference from other units. It also provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro photos.

RS-60E3

Camera Compatibility

Canon:

  • Canon EOS R6, R, Ra, RP,
  • Canon EOS M6 II, M6, M5,
  • Canon EOS 90D, 80D, 77D, 70D, 60D, 60Da,
  • Canon Reble T7i, T6s, T6i, T6, T5i, T5, T4i, T3i, T3, T2i, T1i, XSi, XTi, XT, XS, SL2, SL1,
  • PowerShot: G1 X Mark III, G1 X Mark II, G1 X, G16, G15, G12, G11, G10, SX70 HS, SX50HS, SX540HS,

…and more cameras compatible with Canon RS-60E3 shutter cable.

Note* the Rebel T7 and SL3 are not compatible (without universal hot shoe pin).

Pentax:

  • Pentax K1, K1 II, K3, K3 II, K5, K5 II, K5 IIs, K7,
  • Pentax K10D, K20D, K100D, K110D, K200D,
  • Pentax K30, K500

...and more cameras compatible with Pentax CS-205 shutter cable.

flash trigger

Flash Compatibility

  • Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX, 420EZ, 380EX,
  • Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700,
  • Olympus FL-50R, FL-50, FL-36R, FL-36,
  • Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT,
  • Sigma EF-530 DG Super, EF-500 DG Super,
  • Vivitar 285HV, DF-400MZ, …and more flashes with Standard Hot Shoe and Trigger Voltage of 12V or Lower

*Warm Tips:

The flash trigger kit doesn't fit for Sony Speelight with MI hot shoe.

JJC 2-in-1 Flash Trigger Kit

Radio Frequency 433MHz
Operating Distance Up to 30m/100ft.
Sync Speed Up to 1/250s
Channel 16
Flash Compatibility Standard Hot Shoe and Trigger Voltage of 12V or Lower
Transmitter Power 1x 23A Battery
Receiver Power 2x AAA Battery
What You Get Transmitter x1, Receiver x2, Shutter Cable x1 (Replaces Canon RS-60E3), Studio Light Cable x2, 3.5mm-6.3mm Adapter x2, 23A battery x1, AAA battery x4

Notice*

  1. Make sure both the transmitter and receiver are set to the same channel.
  2. Make sure your shutter speed hasn’t exceeded the flash sync speed.
  3. Make sure you’re not exceeding your flash recycle time.
  4. This flash trigger kit won’t allow TTL flash mode and require using manual.

john
Reviewed in the United States on January 24, 2025
one of the two receivers only worked intermittently. After only a few days both receivers had used over 20 percent of the battery power. I wanted to use them for camera traps so battery life is important. I have several Godox ct 16s which I purchased on Amazon, the batteries in these receivers last over 2 months. The only drawback of the Godox is that they only fire flashes and not the camera which is why I tried these.
Nwilliams
Reviewed in the United States on March 20, 2024
This is my second set. One stays in my Studio and the other in my Camera Bag 👍🏽
GES
Reviewed in the United States on March 12, 2024
This is set #3 Because set #2 failed last month out of warranty. These units do work quite well with my Nikon System with SB-800 Flashes. The transmitter failed. I have tried through Amazon and the vendor with NO support. JJC does have a great list of equipment
Kindle Customer
Reviewed in the United States on February 21, 2024
I have purchased from Cowboy Studio many times. This JJC remote work exactly the way I want.Very easy to connect and use. The cost is great.My other JJC products have been working for over 5 years without a problem. I am very pleased with JJC remote wireless flash controllers.
Erik Halberstadt
Reviewed in the United States on February 1, 2023
There were a couple of hurdles for me to get set up, nothing serious but not exactly obvious. First off the batteries in the receivers are wrapped in clear plastic so it's hard to see if there's a something interfering with connection. The dip switches are not set to match each other therefore did not work initially but once I set them everything was fine. And my first complaint - there's no way to turn off the transmitter and with the tiny little battery in there that I'm sure is going to be difficult to find and fairly expensive I'm not exactly thrilled but I seem to have it figured out for now.
Carlos M Morales R
Reviewed in the United States on January 31, 2022
Me encanto
Customer
Reviewed in the United States on July 13, 2020
The product doesn’t sync on the first or second photo. It will sync on the third photo taken. It’s been passed 30 days so I guess I have to keep it since there are no returns after 30 days. I don’t recommend this product.
Keishla Sanabria
Reviewed in the United States on March 4, 2019
No complaint at all i love this triggers and i have used this on many shootings