Shopping Cart

Your cart is empty.

Your cart is empty.

Kamoer KLVP6 0.085Mpa high Negative Pressure 8L/min high Flow Vacuum Pump 12V DC brushless Motor Diaphragm air Pump PWM 0-5V Speed Control (12V-Single Head)

Free shipping on orders over $29.99

$67.00

$ 30 .99 $30.99

In Stock
  • KLVP6 high negative pressure diaphragm air pump, 12V/24V DC brushless motor, flow rate ≥8L/min, noise ≤70dB, power ≤15W (up to 20W for gas-liquid mix), weight 420g.
  • Negative pressure up to 0.085Mpa, long life brushless motor 10000H, can be compatible with most of the media on the market.
  • Control mode: PWM speed control, 0-5V voltage analog speed regulation, fixed speed work.
  • Applications: transmission of gas detection, negative pressure pump for oxygen generator, negative pressure pump for vacuum generator, adsorption, etc.
  • Support the use of gas-liquid mixture (liquid ratio ≤ 60%), can not be used for a long time pumping, otherwise the product will be damaged in advance, can be customized double-headed models (ask customer service or check the product manual below)
  • Optional accessories: PU outer tube (5x8mm), pre-filter, silencer, 1/8 quick plug connector, 1/8 quick screw connector. (If you need, please ask customer service or check the product manual below)



Product Description

K KAMOER High negative pressure, long life diaphragm air pumps

KLVP6-E-B12

Performance characteristics:

  • KLVP6 series diaphragm air pumps are available in 24V and 12V voltages, customers can choose the right voltage according to their own usage scenarios.(This link is for the standard 12V)
  • The appearance of the product is designed by the master personally, beautiful and generous.
  • Compatible with most of the media on the market (mineral oil and strong corrosive media can not be used).
  • Brushless motor, with better performance and life performance.
  • High quality engineering plastics and rubber materials, showing better product stability.
  • High negative pressure diaphragm pump, customized model maximum negative pressure up to 0.095Mpa.
  • Long life diaphragm pump, product life up to 1W hours.

Technical parameter

Flow (gas) ≥8L/min
Gas-liquid mixing Liquid ratio ≤ 60%
Negative pressure (gas) ≤-0.085Mpa
Positive pressure (gas) ≥0.1Mpa (not recommended)
Power ≤15W (when gas and liquid are mixed, the power can reach 20W)
Noise ≤70dB
Control method PWM speed regulation work, fixed speed work
Weight About 420g
Rated voltage 12V/24V (standard 12V)
Motor type DC brushless
Product life ≥ 10000h
Use environment Ambient temperature: 0-50℃, relative humidity: <80% (no condensation)
Protection class IP30

Flow Pressure Curve

KLVP6-E-B12
KLVP6-E-B12

  • There are two speed regulation modes: PWM and 0-5V.
  • PWM speed regulation: 10KHZ ~ 30KHZ, amplitude: 5V, the control ratio is 0-10% without rotation, and the speed regulation range is 11%-100%.
  • Analog voltage speed regulation: voltage 0-5V, 0-0.5V motor does not rotate, 0.6-4.5V speed regulation range.
  • Yellow line speed feedback, connect to oscilloscope probe or host computer. 1 pulse/revolution speed (revolution/min)=FG signal*60
  • Running at full speed: positive to red and blue; negative to black
Daijing new

Aaron_lith
Reviewed in the United States on July 2, 2024
Maybe small but only consumes like 12-16W and works as well as expensive 125w vacuum pump . Easy control.