Your cart is empty.
Your cart is empty.Works with 2005-2006 BRUTE FORCE 750 4x4, 2005-2012 BRUTE FORCE 750 4x4i (injected) & EPS, 2005-2011 BRUTE FORCE 650 4x4 and 2006-2012 BRUTE FORCE 650 4x4i (injected). Please click on the images above to see all of the winches that this mount is compatible with. This mount is designed to work with most of the winches with the 2-Hole mounting pattern of 3.100" and the 4-Hole mounting pattern of 3.00"x4.875" listed in the above images. It also requires a roller fairlead or hawse with a bolt up pattern of 4.875".
Ace
Reviewed in the United States on February 27, 2025
worked really well with my KFI A2000 Winch and 2024 brute force 750
John Lame
Reviewed in the United States on January 2, 2025
Durable and reliable. Exactly fit for my atv
Arthur E Beckman
Reviewed in the United States on May 5, 2024
Did not fit inside of cradle, the cradle in front of atv tweaked. I mounted outside of cradle, with some modifications, longer u bolts, and I needed to cut a small piece of plywood to raise winch. Now installed its appears quite strong. I have a cheap winch all it has to do is lift snow plow, if there is a need, I can get a stronger winch.
Carlos
Reviewed in the United States on March 26, 2022
It’s a solid plate and fit well in my ATV. My badlands 3500 ATV winch mounted up perfectly and the roller fairlead did too. Installation was not too bad either.
Steve T.
Reviewed in the United States on February 13, 2021
Installed on my '21 BF750 EPS it fit nicely and definitely seemed thick enough to be up to the task. It is mounted with provided U bolts and Nylon fastened nuts. The plate after fastening down is in solid. For a winch I installed the Superwinch Terra 35 SR which fit perfectly to the predrilled holes on the plate. I had to slide the winch in from the side wheel well area as the space above the plate to the frame is tight. Overall the install went smooth the plate seems thick enough and of good quality, in short would purchase again or recommend. As for winches I would stick with a winch that is no bigger than the Terra 35 dimensions as it will be too big to fit in the space. Hope this review helps with your choices in plates.
Tom B.
Reviewed in Canada on May 9, 2018
Fits good, as described, recomended .....
Matt
Reviewed in the United States on December 14, 2013
I bought this to but on my Kawasaki brute force. I bought it for the price, but it's a very nice mount. It fits in place perfectly, bolts in easily, and has very sturdy construction. I also like that it has mounting holes up in the front by the fairlead, not all that I looked at had that.
Green Jeans
Reviewed in the United States on March 2, 2011
This winch mount fit my 2010 Kawi Brute Force 750 perfectly. No problems with the install. It's a quality piece of metal. I put a cheap Champion 2500lb winch on it. The winch mounted with no problems (holes matched) but the cable guide did not match up, the cable guide was too narrow, so I welded it on.
just a nice guy
Reviewed in the United States on October 7, 2010
I installed this on a '05 Brute Force 650. It was so easy and fit perfectly! I had to off-set the winch,a Mile Marker 3000lb, on the mounting plate because of tire rub. However KFI already had holes drilled for such a situation. The only problem I had was I had to off set the fair-lead mounting holes, which I had a local weld shop do. Otherwise the cable would wind itself on one side of the drum. I'm sure another brand of winch that didn't rub would have been no problem at all.I've also purchased KFI's snatch block, roller fair-lead & cable stopper, all are great products. Plus USA made!
Recommended Products
$182.38
$ 90 .99 $90.99