Your cart is empty.
Your cart is empty.Easily add auxiliary lighting to your vehicle with additional Light Tabs. Our Universal Tube Clamp Mounts work with most popular light bar diameters to easily and securely mount lights to your light bar and vehicle, creating extra light tabs for attaching additional light to your off road vehicle. Attach on almost any piece of tubular metal, from bumpers and grille guards to light bars and roof racks, mounting lights has never been easier. Forget rust-prone steel, KC HiLiTES has constructed these heavy duty Tube Clamp Mounts using glass filled Nylon composite material designed to be impact resistant and waterproof. Ready to take on the harshest terrains and most grueling conditions imaginable. Each Tube Clamp Mount comes complete with rubber shims for a fine tune fitment of lights, securely attaching your lights with a range of adjustability for your lighting needs.
Tara B.
Reviewed in Canada on March 12, 2024
Perfect fit and easy installation! Also very easy to adjust when needed!
Glowing In the Dark
Reviewed in the United States on December 14, 2024
The KC HiLiTES 73011 Tube Clamp Light Mounting Bracket: Installs Easily. Mounts very nicely to a brush guard tube frame, and has functioned with no issues since installation. Very Pleased with the product.
Réjean Picard
Reviewed in Canada on March 16, 2023
Installer sur mon Maverick X3 pour soutenir mes deux bidons d’essence de dix litres chacuns. Résiste très bien au brasse-camarade de la bête! (Celle du milieu)
Trevor
Reviewed in Canada on February 9, 2022
By far the best tube clamps that I’ve found on Amazon.
Al Harris
Reviewed in the United States on September 11, 2020
These brackets are well-made and work as expected. I installed these on a previous vehicle and when I traded I bought them again they were so good. The perfect complement for your KC lights but will hold any single hole light bracket. Only downside is they are a bit expensive compared to other brackets but I think you are getting your money worth.
Jake and Rae
Reviewed in the United States on July 21, 2019
First off, yes you can absolutely get a good set of mounts that will function fine for less money.These things are solid, and like every KC product, materials and build are great.Fit and function: perfect. No play, mounts and hardware are all secure.Install: easy, but the version I received did require a 4.5 hex drive. Also, it goes easier if you go 1/4 turn, then switch to the next bolt and go 1/4, repeat. Otherwise it may start to misalign (like installing rifle scope mounts). I also dabbed on some blue loctite.Overall: the look and feel of these can’t be beat. After about a month’s worth of Arizona bounces and vibrations, they haven’t budged. Would recommend to anyone.
Michael
Reviewed in the United States on May 10, 2019
I wanted additional lighting for the front of my truck but the bull bar only allows 2 lights to be mounted so I went hunting and found these KC Brackets that fit the 3" bull bar I have, they fit perfectly and look decent, only thing that I dislike is how far the mounting portion of the bracket sits toward the grille limiting the size of the lights you can use unless you flip the bracket around which gives thieves easier access to the bolt that holds the light on. I recommend these but bare in mind that unless you have compact lights larger lights most likely won't fit, my KC Pro Sports would not fit.
Noel B.
Reviewed in Canada on November 12, 2017
works great
Kindle Customer
Reviewed in the United States on January 15, 2016
Bought a set of these to mount a set of old school KC Daylighters. Yes, they cost more than they should maybe, but been using KC products for decades, I love their Daylighters, and are 2nd to none IMHO. This is the first time I bought these mounts, and I have to say that they are well engineered, and well built. I was reluctant with them being plastic, but after I got them and looked them over, I have to admit, my fears gone away. They seem very strong, maybe as strong as steel clamps. I can tell they are not going to get broken easily. My main concern now is long term. It remains to be seen if the sun's UV will break down and weaken the plastic in time. But for now, I am happy with them. They mount my lights very solid on a 1-7/8" upper bar on my bumper (with the rubber pads included). I drive a 1966 IH Scout, and the old school Daylighters are a good match and have always done very well on my Scout, and these mounts will also. I will pay the extra and get these again when I need more.
M. THOMPSON
Reviewed in Canada on July 27, 2015
they fit snug and seem to be a good quality product.
offgridsid
Reviewed in the United States on January 17, 2015
On all of Amazon - millions and millions of products - It was the only thing that even came close to what I needed, but I just about had to pull my own teeth before I could bring myself to shell out the - OMFG -$18.00 Bucks for the thing. It looks so small.HOWEVER; Upon receipt, I discovered that its absolutely Massive, weighs about a quarter of a pound, is built like a tank and is actually big enough to set a coffee cup on. It does exactly what it's supposed to do and does it very well.I hate to say it but I'm gonna order about three more.
Marty
Reviewed in the United States on February 18, 2014
I used these to mount lights on my brush guard. The installation is easy, they don't scratch the bars and the mount is stable. The bars on my guard are 2" in diameter but I still had to use one shim to make them up tight. Not a bad thing but the directions state I should have not needed a shim with 2" bars. The only real complaint is that they are a little pricey and should be sold in pairs, otherwise they do a great job.
Chris
Reviewed in the United States on October 12, 2011
I ordered this product to attach my license plate to my 2" tube bumper. When i received the mount i was surprised to find only one mount and not a pair. For the price i thought 2 would be a great value but for only one mount i think $20 is a little steep. I was able to make a bracket to mount my plate with only one mount which i feel will work fine. These mounts are made of high quality plastic and feel very secure when clamped to the bumper. The clamps do not feel cheap at all and I would have no problem placing my expensive daylighters on these tabs if i needed another mounting spot. They also come with 4 rubber shims that can be used to clamp them to a smaller tube but i cannot comment on how secure that would be.Overall this is a strong mounting point that does what its supposed to do and i only give it 4 stars because it only comes with one mount and i believe their may be cheaper alternatives
Recommended Products
