Shopping Cart

Your cart is empty.

Your cart is empty.

Kenwood Excelon P-HD1F Front Audio Package for Select 2014-Up Harley-Davidson Models - (1) XM160-2 Audio Amplifier, (2) 6.5' Excelon XM65F Motorcycle Speaker Pair, Includes Mounting Plates & Grilles

Free shipping on orders over $29.99

$589.00

$ 99 .00 $99.00

In Stock
  • PLUG AND PLAY AUDIO AMPLIFIER & SPEAKERS FOR YOUR MOTORCYCLE - Upgrade your Harley with the Kenwood Excelon P-HD1F Package that includes the XM65F speakers and XM160-2 motorcycle amp. Designed for select 2014-Current Road Glide & Street Glide Harley Davidsons
  • COMPACT 2 CHANNEL AMPLIFIER - The Excelon XM160-2 power amplifier with class D amp and 80 Watts x 2 at 2 ohms offers dynamic power while minimizing heat for optimal performance. The power amp also features speaker-level inputs to integrate factory radios and most aftermarket receivers
  • FULL-RANGE FRONT SPEAKERS - The Excelon XM65F 6.5" motorcycle speakers with 300W peak power (150W RMS), 40Hz - 25kHz frequency response, injection-molded polypropylene cone, and a 1” PEI dome tweeter ensure distortion-free, dynamic sound that beats out wind, road, and engine noise
  • PACKAGE CONTENTS: This comprehensive amplifier and speaker package includes Road Glide & Street Glide mounting plates, Street Glide grilles, and input and output wiring harnesses - everything to need to have your motorcycle sound system up and running quickly
  • A BRAND YOU CAN TRUST - With a wide range of high-performing car & bike audio accessories, headsets, professional communication gadgets, speakers, bike cameras, and more, KENWOOD is the one-stop destination for all your technological requirements


Front Audio Upgrade Package for 2014-up Harley-Davidson Motorcycles Elevate your Harley-Davidson riding experience with the Kenwood Excelon P-HD1F Front Sound Upgrade Package. Designed for select 2014-up Road Glide and Street Glide models (excluding CVO models), this comprehensive package includes everything you need to enhance your audio system without the hassle of flashing your Harley radio. The centerpiece of this package is the powerful Kenwood Excelon XM160-2 audio amplifier. Engineered with Class D amp technology and an impressive 80 watts RMS x 2 at 2 ohms, it delivers dynamic power in a space-saving design. Whether you're cruising down the highway or exploring winding roads, this amp is built to withstand the demands of the road while providing exceptional performance. The package also includes a pair of Excelon XM65F 6.5"" full-range Kenwood speakers. With a peak power of 300 Watts and a 2-ohm impedance, these speakers for motorcycles offer powerful performance without compromising on clarity. The injection-molded polypropylene cone ensures deep and punchy bass, while the 1"" PEI dome tweeter delivers crisp and detailed highs. Installation is a breeze with the included mounting plates and Harley-specific wiring harnesses. No need for wire trimming or special modifications. Simply follow the instructions, and you'll have your new audio system up and running in no time. Kenwood is a trusted brand renowned for its high-performance audio products. From car and bike accessories to headsets, communication gadgets, speakers, bike cameras, and more, Kenwood is your one-stop destination for all your technological needs.


Mr. Party
Reviewed in the United States on September 28, 2024
This was for a 21 Riadglide. First off, I was looking for better sound and more volume without breaking my wallet and keeping my stock radio with the GPS and other functions. Well, this definitely fits the bill! This system is fairly easy to install and no need for the dealer to flash the stereo. Amp fits in a tight spot under the radio head and you need to wiggle the speakers in place due to their size. I was impressed with how much volume this added and the quality of sound from the speakers. These actually added some base to my sound. Now, don't buy this if you were expecting a sound system that is equal to 4-6 speakers and $2,000. This is basically for people who are disappointed with the HD stock system and want to actually hear music on the highway. The most difficult part of the installation was running the power wiring harness on the amp. I didn't run it under the tank but, through the fairing and than under the center console on my tank. I would say it took me 2-3 hours from beginning to end, taking my time
Nick Parcel
Reviewed in the United States on August 13, 2024
I installed this on my 2019 Streetglide in about 2 hours. Major improvement from stock H-D speakers on the Boom GTS system. Wow! Highly recommend! Clean, crisp and powerful sound!
chon cunningham
Reviewed in the United States on June 18, 2024
Major improvement, HD should be embarrassed of the speaker they put in, in comparison to this unit. Easy install. Tight fit but will go. Factory connections for ground to speaker are to small for new ones. Just cut off and put ones you need on.
CSS
Reviewed in the United States on February 6, 2024
For the price, this is a great solution for those that are just seeking to be able to hear their music clearly at highway speeds (60-80mph). The stock Boom GTS speakers on my 2019 Road Glide Special had decent dynamic range but of course, as many Harley riders know, they lack power to override wind noise at faster speeds.While I haven't messed with my equalizer in the head unit since the install to measure the dynamic range, I'm happy to finally be able to hear my music while going fast. In comparison with the stock unit, where the volume would get maxed out on it (in terms of level of volume), the new speakers and amp are set to about 60% volume level.The only gripe I can state is the instructions in both the manual and on Youtube are skewed towards Street/Electra Glides. The strongest point of contention would be feeding the power harness through the fairing to the battery. While you can either feed the wires underneath the tank or underneath the center tank console (what I did), the Kenwood Youtube install vid just shows the installer feeding up the wires from underneath the fairing with no indication of exactly where it was fed through. I found on the clutch side of the fairing stay (coming off the steering yoke) there is a crevice in the plastic that is just large enough to allow you to feed the amp end of the harness (with its inline fuse too) through, and it worked surprisingly well. Hope this helps.
R. Chris Sutton
Reviewed in the United States on October 8, 2024
The size of the magnet and weight of these Kenwoods over the OEM Harley speakers is unreal. The amp is nice. Very economic kit to get a better sound / volume from factory radio without a flash. Installation very easy for any DIY person. 4 Stars - because the amp does develop some static to some radio stations that otherwise didn't exist before. Should clarify that noise-filters might be required.
samir
Reviewed in the United Arab Emirates on November 22, 2023
Super easy install on roadglide and its super loud way louder than stage 2 Harley by Rockford...lovely
Recommended Products

$175.00

$ 72 .99 $72.99

4.4
Select Option

$119.95

$ 50 .99 $50.99

4.8
Select Option

$129.00

$ 53 .99 $53.99

4.4
Select Option