Your cart is empty.
Your cart is empty.Product Description
Kenwood Excelon X802-5 - X Series 5-channel car amplifier
Need more power for your entire system, Kenwood's Excelon X802-5 five-channel amplifier delivers 50 watts RMS to each of your front and rear speakers, while sending up to 500 watts RMS to a sub, yet it'll still fit almost anywhere in your vehicle. You can also use this amp in 3-channel mode to power a pair of high-performance speakers with 150 watts RMS each, and a sub with 500 watts.
High-and low-pass filters let you optimize the sound for your vehicle and speakers. For the subwoofer channel, a precise low-pass filter lets you optimize the sound for your sub, while the built-in bass boost lets you dial in just the right amount of thump. An optional wired remote control lets you control your sub's level from the front seat.
Convenient technology
Class D technology ensures that this compact amp will run cool and perform reliably. Kenwood divided the amp's internal circuitry — analog, digital, and power supply — onto separate, non-overlapping circuit boards for improved overall sound quality. The X802-5 accepts input signals via RCA cables from an aftermarket receiver or by way of your vehicle's speaker wiring, so it'll work with almost any mobile audio system. If you do use the speaker-level inputs, the amp can sense the signal and turn itself on, so you won't need to run a separate remote turn-on lead to the receiver or fuse box.
Sliding Terminal Cover
Detachable sliding terminal cover offers a sleek design and easier installation. All terminals and connections are on one side for easier installation and a cleaner look.
CEA-2006 Compliant
CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured over a frequency range of 20 Hz to 20 kHz (for full range amplifiers), with 1% or less Total Harmonic Distortion plus noise (THD+N). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions.
Output Coil with Magnetic Shield
Prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
Danna
Reviewed in the United States on March 5, 2025
Love this! Works well.I really don't know much about the whole stereo systems, but have installed two of these. One in my car and one in my son's car. I don't know how to adjust it very well, but did what I could and it sounds good to me. I'm sure it could sound better with more knowledge on adjusting it. It has even worked decent in the high summer heats of Arizona without AC in the car although it gets very very hot.
Rosie
Reviewed in the United States on February 6, 2025
Order this for my 2020 Tacoma, easy to install and the sound out of it was great. Great for door speakers and sub, easy to set up too.
Jose A.
Reviewed in the United States on January 5, 2025
Easy to install, slim enough that it fits below the driver’s seat. And it sounds good. I connected the SP level input to my factory head unit’s speaker outputs. The sound is not earth shattering, but it’s way better than the OEM.
Customer
Reviewed in the United States on January 3, 2025
Using a small fan to cool it.i'm running a nice kenwood system in a 98 Sonoma. Factory locations sit in dash and doors. Added 2 6x9's and 2 10 kickers in the extended cap. Run one 10 on the B port with 120 lpf on the head. The other 10 below 80 lpf on amp. 6x9s 100hpf
Goodbye to the CORRUPT E.U
Reviewed in the United Kingdom on July 10, 2024
Great amp . Quality 👌👍
MeMyselfAndI
Reviewed in the United States on March 15, 2024
For such a small amp it really has great output. The tun-ability itself is worth the money. Im running two 6x9 fosgates, 2 6.5” fosgates, and a puineer D series 10 in a 2020 tacoma. Took abiit an half hr to tune but sound awesome! It does get hot though! So make sure you give it room to breathe!
Michael Rose
Reviewed in the United States on October 5, 2024
I have used Kenwood in my vehicles since I was a teenager in my own car. I am impressed with the quality and durability of this product line. I get great sound and is easily installed. Highly recommend this product to everyone.
Nicholas Davis
Reviewed in the United States on October 20, 2024
I am pushing 2 door speakers, 2 rear deck speakers, and a 15 inch subwoofer. I can blow my ear drums out with this Kenwood. Make sure you pair with some great quality speakers to match. I got 4 rockford fosgates and the sub is a skar. I regret nothing.
Mark Dulisse
Reviewed in Canada on March 27, 2022
Luv the 5 channel
Amy McCormick
Reviewed in the United States on July 27, 2021
Overall I’m going to give this 4 stars, it’s going to be the first day of the install and everything sounds great and the amp is getting warm but not too hot. It’s getting 4 stars because of shipping, the box it was shipped in was fine, and the paper stuffing on the inside was fine was well, but the actual amplifier box had a big gash in the middle and was actually opened on top. I’m hoping I didn’t get a used item since I paid retail price but I guess time will tell. Other than that shipping was fast and the amp sounds great.
Karl
Reviewed in the United Kingdom on December 2, 2021
Amp sounds great and puts out good power and clear sound. However I've just wired up a subwoofer, so I'm using all 5 channels. And at full volume this amp does get very hot. This is a great little amp but be careful of install location as if using full usage it will get very hot.
sara alabsi
Reviewed in Canada on June 22, 2020
Powerful amplifier
Max Headroom
Reviewed in Canada on November 5, 2020
Great sounding Kenwood 5-channel amp for applications where space is an issue. Not much room in my 2016 RAM 1500 Crew, so went with this amp because of its compact size. The unit fits nicely under the rear seat, behind my Atrend BBox sub enclosure. The amp is connected to four Kenwood Excelon 1800 speakers in the doors and a pair of Pyle 12” Bluewave subs (wired in parallel) - base sounds pretty good, but I know the Kenwood amp could punch harder if I had better subs in the back. I ran a Rockford 4awg power cable down the drivers side and Rockford twisted pair signal + speaker cables down the passenger side (remote turn on and remote base control wires can go down passenger side too) and everything sounds great - no electrical noise or interference.
Recommended Products
$219.99
$ 86 .99 $86.99