Your cart is empty.
Your cart is empty.Product Description
Functional
Cut material up to 1 ½” thick.
MDF base and Sure-Cut backboard
Act as sacrificial surface for splinter-free cutting
Kerf Line
Metal rails guide your saw through the cut
Mr. W. C. Redman
Reviewed in the United Kingdom on January 24, 2025
i have also cut half lap joints with this item. very pleased with it, glad i bought it.strongly builti can highly recommend this product well worth the money
Peter Willis
Reviewed in the United States on January 13, 2025
Easy to assemble. Square your saw, tighten up the rails, then cut your initial cut through (in the right direction). Works great. In the pictures I'm cutting 15-degree angles in a bunch of boards, they came out good. Can't believe I didn't know about this until recently, would have used it so much over the years.
Emilio Barcenas del Castillo
Reviewed in Mexico on July 1, 2024
Me ha servido muy bien
BOB S.
Reviewed in the United States on May 21, 2024
Used this to cut vinyl flooring. I was able to make nice straight cuts. The only problem was I was using a 5 1/2 in circular saw so the cut wasn’t deep enough so You had to put a piece of scrap beneath it. Just be aware it requires assembly.
Hector A.
Reviewed in the United States on December 2, 2024
Seller was very responsive. Looking forward to using in the future. I had issues cutting a straight initial cut on the jig itself, but will try again. May have been user error. Great customer service!
大田
Reviewed in Japan on November 24, 2024
海外製なのでどうかなと思いましたが、とても良いです。YouTubeでもレビューしてる方が多いので気になり購入しましたがもっと早く見つけていればと思う製品でした
T.A
Reviewed in Japan on April 28, 2024
木材の切断に関しては、テーブルソー、丸ノコ＋スタイロフォーム、スライドマルノコ、と目的に応じて使い分けてきましたが、今後はこちらがメインになりそうです。一番の理由は、準備が楽。作業机にテーブルソーやスライドマルノコをうまく一体化させてる人は例外ですが、基本的にはどの動画もセットアップが必要です。その過程が一番楽でした。
Tiger
Reviewed in Canada on April 21, 2024
It is easy to turn a circular saw into a miter saw by using this platform. I think it covers at least 80 percent of the miter saw functionalities and it covers all my needs already. The cut is easy and accurate. And the circular saw can be used as itself at any time. It also saves a lot of space for storage. I love it very much and highly recommend it to anyone who already has a circular saw.
Customer
Reviewed in the United States on July 23, 2023
The product was easy to assemble, well-written instructions and upon inspection seemed to be well designed. One upgrade is the original depth of cut for creating the kerf line might need to be over 2" to ensure the corner is severed. I found the depth of cut required was about 2 1/4" for my saw. I knew I may be pushing the product to an upper limit using a 2 X 4 X 8 pine board. The product worked best and easiest with smaller stock (1/2" to 3/4"). It took me a bit bit to get used to the product. I would suggest you wax the metal track to ensure the metal on metal fraction is reduced. The material support wings worked well to support the 8 foot piece but the whole cross cut station tended to rise at the front due to the board weight. I corrected this issue by placing shims at the back of the product to prevent this tipping and provide a solid cutting base. One other item perhaps not mentioned is use one saw blade. I decided to switch saw blades and on first use the blade did not match the existing kerf exactly and popped out a small bit of sure cut material. The material hold down clamps work excellently for smaller stock but strain to hold a 2" x 4" piece. The adjustable fence is effectively useless for larger stack, but can see how it could be beneficial for smaller stock. I pushed the product to emulate a miter saw function which it is not designed. It is a cost effective alternative for small stock options but larger stock options likely need a more robust and capable equipment like a miter saw.
Reversemidasman
Reviewed in the United States on July 15, 2023
Got it when it was discounted so knowing the KREG brand I figure this would be just as good as the other KREG products and it certainly is.It was very very easy to assemble due to the clearly written instructions and diagrams. All the parts are packed well in the box and the finish of each part was excellent.I needed it cause I already have a miter saw but its big and noisy and bulky and I have more tendency to using my circular saw for my DIY projects so this was just perfect.It is decent weight and made of combination of plastic and the wood parts are I think they call it composite or MDF like material but very well finished and has all predrilled holes as needed.Once I finish assembly and did the kerf line cut, I tried it out and it works fine. The only thing is to make sure you have it secure when in use. So I used my wood clamps to hold it down when I made my cuts. Works fine for my needs for 90 degree cuts and 45 degree cuts.I'm glad I got this and its handy to bring out and put away easy.
Just a guy
Reviewed in the United States on June 26, 2023
A long way towards a chopsaw without the expense.I bought this because I don't have a miter saw for now. I do have a table saw, but the way my shop is configured for now, I can't easily use it for 8 foot pieces. I can cut wood to exact lengths with this on a work table without issue.In a recent job, I used it to easily cut down longer pieces into lengths I could use on my table saw. I needed to cut at angles for this project, and the table saw gave me the precision I needed.This works really well, is small, sets up in an instant, and makes it easy to accurately cut longer beams.It has features for cutting at an angle, but I use it for 990 degree cuts only.
Tex in TN
Reviewed in the United States on November 13, 2023
While there are many tutorials for how to make a similar crosscut jig, at ~$30, this does the trick with little setup. It has the potential to replace both a table saw and a miter saw, as long as you don’t work with large stock. The rails are just high enough to slide 2-by boards underneath flat on their faces. This is a basic limitation of small circular saws, but something to consider.Also, it needs to be secured before making any cuts. Clamps can be used as long as they don’t get in the way. There are also holes for screws, if you need something semi-permanent.It was fairly straightforward to assemble. I did take some extra time ensuring everything is square. I was able to make some very thin cuts and they were very clean with no tear out. Any saw will be fine, though I do recommend getting a high quality blade.
paridc
Reviewed in the United States on October 2, 2023
The Kreg KMA4100 Crosscut Station is a game-changer for anyone who seeks precision and ease when making crosscuts with a miter saw or circular saw. This portable guide system has quickly become an indispensable tool in my woodworking workshop.The variable circular saw guide is incredibly versatile, accommodating a wide range of saws. It ensures that every cut is perfectly straight and accurate, resulting in professional-level craftsmanship.The portability of this station is a significant advantage. It's easy to set up on any work surface, and I love that I can take it with me to job sites. The robust build quality ensures it can withstand regular use and abuse.What sets it apart is the ability to make repeatable cuts effortlessly. This feature saves both time and material, making it a valuable addition to my woodworking arsenal.Whether you're a professional woodworker or a DIY enthusiast, the Kreg KMA4100 Crosscut Station will elevate your woodworking game. It combines precision, versatility, and portability in a single package. I can't recommend it enough for anyone looking to achieve flawless crosscuts with ease. It's a must-have tool that has earned its place in my workshop!
Recommended Products