Your cart is empty.
Your cart is empty.Product Description
Features:
The Valve Seal Remover Tool is used to pull old valve seals and install new seals on overhead camshaft engines
It is for valves in place or removed from heads on automotive, motorcycle, marine, and power sports engines
Operation Guide
1. Choose an adapter and thread it into the socket, lightly apply lubricant (not included)
2. Slide the valve seal over the pilot of the adapter.
3. Then, select a socket and thread it onto the drive handle, place a valve seal into the counterbore of the selected drive handle
4. Place it over the exposed valve stem to install the seal
Tip: Make sure to use one size smaller than fits into the valve stem guide. Otherwise the tool damages the new seal.
Pliers jaws are serrated for extra grip and has a 5.5” (14cm) maximum jaw opening
7Pcs seal driving adapters fit seals 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, and 3/8”
Knurled ends on 2” (5.1cm) adapters for tapping down the new seal
6” (15.2cm) handles to provide extra grip 3.5” (8.9cm) deep sockets for seals O.D. 10.8mm to 14.8mm
AKS
Reviewed in the United States on January 27, 2025
I bought this to remove valve stem seals on a 1984 Porsche 944. It might work better on other cars, but the seals in my engine did not seem to have enough of a lip for the tool to get a good grasp on. The trick seems to be to twist the seal gently back and forth till it breaks the bond between the seal and the valve guide, than lift it off. I used gentle heat from a heat gun and put a paper towel between the tool and the seal, which helped a little to get a firmer grip. Maybe the tool to install will be more useful. It comes in a nice case, though.
Kelso
Reviewed in the United States on August 31, 2024
No issues found. I have not used any of the installation tools, but I checked the build quality. All threading is smooth, the case opens and closes properly, and nothing seems to be out of specification. Your results may vary.
Customer
Reviewed in the United States on June 7, 2024
The valve stem seal installation guides are not quite the correct size,(either too loose or too tight -none snug as desired) but still works . The valve stem steal removal pliers requires Herculean stength to remove it - but eventually they come out with patience.
S&S Automotive
Reviewed in the United States on June 29, 2024
Head jobs
Bratislav Krasic
Reviewed in the United States on February 21, 2024
Does what is supposed to do pretty smooth. For the money is worth it. I was able to speed up steam valve seal replacement, then when I used wranch socket to put new seal on.
T Pierce
Reviewed in the United States on February 13, 2024
The pliers to remove the seals were to flimsy. The jaws of the pliers were also too smooth and would not grip the seals. The seal drivers were almost the correct size. Maybe it is just a Toyota issue. I ended up make a seal driver to keep from damaging them. Look for a better product if needing this tool.
Albin fuenmayor
Reviewed in the United States on October 30, 2024
Perfecto
David Zicari
Reviewed in the United States on December 11, 2023
This tool worked perfectly for me. Missing a size I could have used but all in all it got the job done
Recommended Products