Your cart is empty.
Your cart is empty.Product Description
DETAIL DISPLAY
High Quality Blades
- Made of HSS (High speed steels) featuring High Hardness, Wear Resistance, and Heat Resistance.
- The height of the blade rising and falling is 16mm; the length is13".
- We are equipped with a sharpening stone which you can try using if the blades become dull. Be careful not to cut your hands.
Sturdy Panel
- Made of ABS (Acrylonite Butadiene Styrene), which has High Strength, Good Toughness, and strong LOAD-BEARING capacity.
- The panel is also engraved with degrees for easy use
-
The length of the handle is good at utilizing the lever principle which is labor-saving.
-
Plastic material makes it more comfortable for users to grip and durable.
-
The panel is equipped with a scale, which can be used for measurement.
-
0-45°Angle
-
Attention
Solid wood panels (janka less than 1080) with a thickness greater than 8mm cannot be cut smoothly
-
Yesenia Raygoza
Reviewed in the United States on September 29, 2024
I found the laminate floor cutter to be an excellent tool for my projects. It cuts accurately and is very user-friendly, which I appreciated. The lightweight design made it easy to move around, and it handled various laminate thicknesses without any issues. I did experience a slight learning curve at first, but once I got the hang of it, it saved me a lot of time compared to using traditional saws. Overall, I consider it a valuable addition to my toolkit for both DIY tasks and professional work. Quality is amazing!
Robyn Nickel
Reviewed in the United States on September 28, 2024
The media could not be loaded.
Steve
Reviewed in the United States on September 18, 2024
I recently purchased this for a small project, and I couldn’t be happier with its performance. This cutter is versatile and handles various materials. The setup was straightforward, and the cutter’s blade provided clean cuts. It’s lightweight and portable, making it perfect for both small and large projects.Overall, this laminate flooring cutter has significantly streamlined my flooring installation process. I highly recommend it for anyone looking to achieve professional results at home at a low cost.
Howard Bernstein
Reviewed in the United States on September 13, 2024
The flooring cutter seems well constructed. Assembly was a little tricky as the instructions are pretty light, but I was able to figure it out fairly quickly by examining the pictures carefully. There is a “handle lock” on the cutter assembly to lock the handle in the down position when not in use. The lock itself slides a couple of inches right and left, and I’m still not sure why. It also does not really lock very well. After you tighten it down, a simple knock gently into the handle will pop it back up, as it is spring loaded. Not a big deal, but it seems like there should be a better way to do this. Just use a bungee cord to hold it down if necessary. Also, it would be good if the handle locked in an even more flat position, as now it locks at about 25 degrees up from the table.But most important, how does it perform? I didn’t have my flooring yet, so I picked up a samples to try it out. I’d done LVP before by scoring and breaking. Having a cutter seemed attractive. I cut a couple of samples. One of 6.5mm, and the other 12mm, both vinyl plank.The 6.5mm cut without difficulty. I tried a 45 degree cut as well, using the 45 degree indentation in the table as a guide, and I checked it and it was in fact an accurate 45 degree cut. The edges are fine. I think what happens is that the top layer is cut smoothly, and the core at some point snaps. Makes sense.The 12mm was a little harder to cut, as expected, but also easily done. The rubber bottom of that plank did not cut through completely, but it was easy to separate.All of these cuts typically end up under baseboard or edging of some sort, and it’s perfect for that. Don’t expect it to work for joints. You need to use a chop sow for that. Bottom line, this will definitely allow you to work faster and more accurately than hand scoring and breaking.
VdOdu95
Reviewed in France on December 4, 2024
The media could not be loaded.
Harun Gutic
Reviewed in the United States on November 25, 2024
It cuts with ease very good
Vincenzo
Reviewed in Italy on November 11, 2024
“⭐️⭐️⭐️⭐️⭐️ Ho acquistato questa taglierina per pavimenti in laminato per un progetto fai da te a casa, e devo dire che ha superato le mie aspettative! L’attrezzo è solido e facile da usare, perfetto per chi, come me, vuole fare lavori in autonomia senza dover ricorrere a strumenti più complessi. Il taglio è preciso e netto, senza scheggiature, e mi ha permesso di risparmiare tempo ed energia e soprattutto denaro. Il design ergonomico ha reso il lavoro confortevole anche dopo lunghe sessioni. La consiglio assolutamente a chi cerca uno strumento affidabile per la posa del laminato. Ottimo acquisto!”
jake
Reviewed in the United States on October 3, 2024
this is a great cutting tool, simple to use and put together. has angle marking grooves and ruler for accurate measurements. and all for a good price.
Julen
Reviewed in Spain on October 29, 2024
The media could not be loaded.
Leonardo Minguzzi
Reviewed in Italy on October 23, 2024
The media could not be loaded.
Kunde
Reviewed in Germany on October 1, 2024
The media could not be loaded.
Recommended Products