Your cart is empty.
Your cart is empty.Product Description
No Software Update Required
Our switch banks DON'T require any software updates. You can be your home mechanic, just install and is ready for use. You don't need to go to the dealership to activate it. Lasfit provides a premium but economical solution to run 4+ auxiliary switch panels just like other switch without having the hassle of getting your ecu flash.
ABOUT LASFIT
QA does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged.
Mark from Texas
Reviewed in the United States on February 3, 2025
Fit and finish are perfect OEM style, install instructions are clear and easy to follow for the installation. 20-30 minutes installation. This is an easy DIY project even for the non mechanic folks. Helps keep your wiring need and clean. This make it super easy to install any lightbar/ditch lights or any other accessories a breeze. It looks and fits perfect in my Jeep Gladiator. I would recommend it. I have had it for over a year with zero issues. This is the best one for EOM/Factory looks.
Honeycutt
Reviewed in the United States on July 15, 2024
This unit is SUPER easy to install, and looks just like factory.From beginning to end the install could not be any easier. It is such a simple plug and play setup.This company really sets the bar for all other aftermarket suppliers to try and reach. The really thought of everything, even down to the wires looking just like a factory wire.Stop searching, and just buy this!
Jeremy White
Reviewed in the United States on June 22, 2024
I installed this in a JL Willys (2.0L) and it couldn't have been any simpler. The fuse box bracket slotted right in and running the cabling is clearly explained.Installing the switch bank was easier than I expected. You need a little bit of patience to get the control panels back on but just need to move the wires around and find a good fit.The switches look great. I installed this to support a winch on/off solenoid from the cabin. The fuse box mount also had room to hold the solenoid.You can't program these switches like the OEM switch bank but, to me, that's adds to the simplicity. Overall great value for the price .
Gregory Michael Dooley
Reviewed in the United States on October 29, 2024
I am very impressed with the quantity and ease of installation of these aux switches. They look very close to factory and wiring and instructions are top notch! Highly recommend!
greg Abell
Reviewed in the United States on October 11, 2024
This is a complete and well made kit for adding aux switches to your Jeep. Looks and feels factory original and the installation is very thorough and complete. This gives 80% of the factory functionality but at a much lower cost than if you were to buy and install the factory parts. This kit does not interface with the touch screen like the factory system does, but you get the 4 switch controlled leads both inside and under the hood like the factory. I am very pleased with this kit.
Rain
Reviewed in the United States on June 13, 2023
Installation doesn't take very long and ia fairly straight forward. However only giving the four stars since there was no instructions or even a mention of an install guide/video on YouTube. Looks great otherwise. You can see the quality of the harness and wiring is top notch.The harness is also for a dual switch but you don't know this since it does not have any instructions or mentions of where to find the install video.Great product all around except for that part.
Arturo Velazquez Solis
Reviewed in Mexico on March 21, 2023
Parece de agencia, súper recomendado.
Daniel trottier
Reviewed in Canada on October 28, 2023
Tres beau kit super facile à installer look d’originePlug and play.
Joel
Reviewed in the United States on October 19, 2023
Installed on a Jeep Gladiator JT. Install went smoothly, instructions were decent, however if you have never done auto wiring and auto trim removals, this might be too much without watching some videos and having a little skill. You need to figure out how to run wiring and anchor it safely, away from heat and moving parts, not break plastic panels or clips. Avoid shorts while messing with the battery.Switches work, fit nicely in factory location. Harness has prewired output for all 4 switches that terminate both in the cabin, as well as in the engine bay. Grommet to seal the firewall where wires enter the cabin. I wired lights and options to this, and added a ground. In my case, I wanted one switch to control a couple lights, so I added my own relays and allowed this to power the relays.All in all, I love this. Its simple, clean, and looks great. Fits beautifully under the hood. In the cabin, everything was plug and play with factory harness. Switches are illuminated and auto-dim with cabin lights. Wires were well labeled and wrapped.I did not open the fuse/relay box, but my main concern is how to replace an inline fuse or relay within their box. I am wondering if replacement is even possible.
Steve Bowers
Reviewed in the United States on November 29, 2021
Excellent product. I was not sure at first due to the limited reviews but gave it a try since the Mopar part is complex to install and on back order. I am so glad that I purchased this one. Easy install, excellent video, and worked the first time. The lighting adjusts with the lights on your dash and it permits up to 4 accessories with all aux wires coded to the switch for easy installation. The fuse box has no grounds thus you will have to ground any accessories individually. Overall I give it 5 stars for fit, finish, and ease of installation with plugs that plug right into factory and no splicing (except on the accessory end of course).
Recommended Products
$108.00
$ 44 .99 $44.99
$194.14
$ 84 .99 $84.99
$41.01
$ 19 .99 $19.99
$45.13
$ 20 .99 $20.99
$35.80
$ 18 .99 $18.99