Your cart is empty.
Your cart is empty. What You Get:
1 * pushbutton switch
1 * wiring instruction
What's the Pushbutton Switch:
This is a perfect choice if you are in need of a rugged push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated red power symbol LED. It is a SPDT with 16mm threading and 1mm pitch. This button is perfect for basic On/Off functions. Overall length (including leads) is 1.3" and has small solder lugs for connection. These latched buttons are rated up to 5A and 250VAC while the LED is rated for 5-12V.
What's the Latching Switch:
Latching switch, push it down, it stays down and latched in the closed position, press the button again and it releases and "unlatches".
What's the Latching Switch Used for:
Most often latching switches are used for various additional electric equipment inside & outside the car.(Such as critical lights, chassis lamp, fog lamps, dome light)
What's Note:
* These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged in the water.
* The project and application you are going to be used for,don't let current go above 5 amps.Or the switch will get warm and to be burned out.
What's the Customer Support:
If you have any questions, feel free to contact us by E-mail any time.We get professional customer service staff and technician to help you.
Specifications:
Thread depth: 5/8" (16mm)
Head diameter: 3/4" ( 18mm )
Button diameter: 0.36" ( 9mm )
Mounting hole size: 5/8" ( 16mm )
Depth inc contacts: 1.3" ( 35mm )
Switch combination: 1NO1NC
Operation types: Latching
Switch rating: 5A/250VAC, 5A/30VDC
LED rating: 15mA, AC/DC 12V
LED color : Red
Head shape : High flush
Enclosure material : Stainless steel
Protection level: IP67,IK10
Wikus Potgieter
Reviewed in the United States on March 25, 2025
Great quality
moustafa farouk
Reviewed in the United Arab Emirates on February 3, 2025
good
Daniel Ma Gill
Reviewed in the United States on July 30, 2024
Factory switch on my laser went belly up -- this came quick and was a direct replacement
Doug Pittman
Reviewed in the United States on March 7, 2024
Button stays latched in nicely but is recessed in the housing and is difficult to press if you have bigger hands. Lights up well
chilegod
Reviewed in the United States on April 30, 2024
Works great but the light wont work with a two wire setup. Which was fine for me. It feels like good quality.First one fried. Pay attention to wiring diagrams carefully. You connect to "C" and "No". The photo shows the button on my DF 64v2, of which a number of power buttons failed. I hope this helps those needing similar application.
Tom
Reviewed in the United States on May 18, 2022
I needed a switch for some accessory lights on my motorcycle and most of the switches I found locally were too big for the room I had available. This one is tiny and easy to hide. It can be wired to light when on, off or all the time. I chose to light up when on. It's got a bright blue light and when it's off it blends in nicely to the black plastic part I've mounted it on.
dangermouse
Reviewed in the United States on July 27, 2019
This button broke within a month of light use. Don't buy these cheap buttons. Overall installation was easy, but other buttons come with a harness to make installation that much easier without the need for small female adaptors. This button does not. Look elsewhere.
M
Reviewed in the United States on January 10, 2019
Easy hook up with the optional "dixie cup" harness attachment, only challenge was the LED is voltage limited...starts to dim below ~3v. I was able to keep the LED visible at 2.8v. The action requires a relatively "deep" push into the socket...big thumbs won't work! Solid clicking action, just what I needed.
Christopher Barr
Reviewed in the United States on October 12, 2018
Great switch. I am using it to control 120 V AC to a power supply and using a 5 V circuit from the power supply to illuminate the LED in the switch. This is not the standard way to wire the switch but Fish in Customer Support helped me solve the problem. The +/- terminals illuminate the LED. The NO, NC and C pins switch the power. As long as you don’t connect NO to + you can have independent control over LED illumination and power. Refer to wiring diagram in product pics.As said by other reviewers their Customer Support is excellent. I’ve been using it for three weeks and haven’t noticed any problems. Plan to buy it again.
Recommended Products
