Your cart is empty.
Your cart is empty.TP55 Torx Plus Bit.
George
Reviewed in Canada on January 18, 2025
Perfect to torque cam phaser bolts! Just what the doctor ordered.
Farmboy
Reviewed in the United States on January 16, 2025
Working on my E350 I realised there was something up with the T55 I was using to remove the seats. After some browsing I come to find out I need a T55+? (Had never heard of it). Turns out, that is 100% correct. This IS the PERFECT fit for the floor brackets for the Fords. This fits my E350 and my F150 as well.
jim
Reviewed in the United States on July 29, 2024
A lifesaver thanks to Ford having to use standard T55 bolts on the front and TP55 bolts in the back of the seats in my F-150. Solid quality and strength especially since the bolts haven't been touched since the assembly line 23 years ago. Actually, went through 3 Kobalt T55's getting the front bolts out (which were the easy ones), yet this TP55 took care of all the back bolts and looks as good as the day I opened it.
Steven
Reviewed in the United States on June 29, 2024
I replaced all my seats in my 2003 f350 xlt in 2024 and it didn't break. It's 3/8 drive and worked out fine. 1/2 drive would had been better for I had to use a reducer socket from my 1/2 strong arm to the 3/8 socket. All n all this tool did well.
Amy G. Friedl
Reviewed in the United States on February 14, 2024
The Torx Plus 55 is an absolute must have if you are removing and replacing cam phasers on your Ford Duratec 3.5L engine. Regular T-55 Torx is not correct for torquing the torque-to-yield bolts and will cause issues. You must use a Torx Plus 55. This tool was perfect. As a side note: If someone has torn up the bolt face you may be able to use a regular T-55 tool to remove the bolt.
Moe
Reviewed in the United States on November 22, 2024
I was able to remove the bench seats from my Econoline 150 passenger van.😊
Elael
Reviewed in Canada on July 10, 2023
As described
Perjian
Reviewed in the United States on December 4, 2023
It's from lisle tools. Expect quality. It's well made and accurately sized.
Michael Wright
Reviewed in the United States on January 29, 2022
I bought this bits socket because I couldn't remove the seat from my 2000 Ford Econoline to replace the seat. I could not use a regular T55 torx bit and no other sizes would fit the seat bolt. Why on earth Ford would do this, I have no idea. After doing some online research, I found and obscure web page that recommended this tool. It worked Great! I would suggest spraying penetrating oil the day before and letting it soak first.
J. S.
Reviewed in Canada on September 1, 2021
Quality socket,
Isaiah
Reviewed in the United States on December 4, 2021
I bought this bit for the flywheel bolts on a Nissan Frontier, repair manual states that the bolt is a Torx Plus 55.On some bolts the Lisle 81100 TP55 bit was too big too fit into the bolt head, even when using a hammer to force it in. Other bolts it fit and worked great. In the end I used a duralast T55 on an impact wrench. Replaced the bolts from Nissan directly for about $25.This bit did make the job easier, where it worked.
Customer
Reviewed in Canada on July 25, 2020
Good quality tool for the job
PaperboyQc
Reviewed in Canada on November 30, 2019
Ford 3.7/3.5 cam bolt obligation.
Recommended Products
$33.83
$ 16 .99 $16.99