Your cart is empty.
Your cart is empty.Product Description
Richard T.
Reviewed in the United States on January 5, 2025
If your tractor takes these spindles, this tire/wheel package will fit...tightly at first. Craftsman 403089 and 403090 --replaced by Husqvarna 532403089 (LH) or 532403090 (RH). I ordered the 2 Husqvarna spindles for my Craftsman Garden Tractor ( 917.287451). You should be able to get 1 washer on and your E clip on either spindle axle --along with your new wheel. It is a very snug fit, but it will loosen as the wheel hub spins in that bearing cup. Nobody has the time or desire machine their wheel hubs. We're Americans, and we make things work! By the way, the wheels came fully inflated with bearings already installed. I ordered the HD Switch 4- Pack Front Wheel Bushing to Bearing Conversion kit (9040-H) and when it gets here, I will pry the inner seals off of the new bearings and install them after removing these bearings. My objective is to grease the new bearings through the grease zerks on the wheel hubs. There are way too many stories of wheels falling off. These bearings must have a continuous supply of grease.
Doug
Reviewed in the United States on August 8, 2024
Replaced the tires on my Brinly cart with these wheels and they provided a variety of spacers, washers and bushings that allowed a quick, perfect fit. I was astounded at how fast and easy I was able to swap out the old tires/wheels with these as I anticipated spacing/fit issues (which did not occur). A+ packaging and supplemental spacers, etc. Back in business in a flash! Alleluia.
Maineman
Reviewed in the United States on July 5, 2024
I like that the wheel and tire are complete and inflated.No extra expense having tire mounted Extra bearings are included. The included thrust washers would not fit and the old washer did not fit either. I am doing without one now. Dust caps are not included . I wish they were ,as mine need to be replaced. So far I am pleased with the tires and wheels.
Nickeya Laycock
Reviewed in the United States on July 31, 2024
These tires are too big and catch the mower deck when making a sharp turn. Do not buy. I was out of town a son didn’t get them installed until after the return date and now I need to order new wheels. The product description is wrong.
CES
Reviewed in the United States on May 24, 2024
Everything fit great except hub for dust cap was shorter than original equipment. Managed to get dust cap back on and hopefully, it will stay on.
Edward R.
Reviewed in the United States on March 18, 2024
I was a little skeptical about installing them on my X380 but for the price I was willing to give it a go. John Deere wanted $520 for a pair. The stock size tire is 15x6.50-8. These are 16x6.50-8. only 1 inch taller so I figured what the heck. The axle size is 3/4", same as my mower. I have a small machine shop so if they didn't fit for some reason, I figured I could modify them to make them fit. They shipped overnight so that was nice. I pulled the old wheels off and installed these. They fit perfect! No issues. The stock washers and retainer clips fit just like with the original wheels. They came inflated @ 35psi which is kind of high. I lowered the pressure to 15psi. Mowed my 3 acres of grass with no problems. Time will tell to see how long they will last. They seem to be very well made.
ronwee
Reviewed in Canada on December 28, 2024
The rimss & tires seem to be ok, but the hub is too wide to fit on a JD 160 lawn tractor. I ended up grinding the welds off the back cup on the spindles and re-welding them back an 1/8" to allow for the proper washers and the e-clip to fit in the groove. The bearings in 1 of the wheels have tight spots, so don't expect much life out of them. Have already ordered new ones for spares.
Barry
Reviewed in Canada on April 10, 2024
They are good quality made strong fast delivery. The only reason why 4 stars is I can’t use the washers that come with the tires . I’m using just the spring lock to keep the tire on I hope they don’t come off
Power N.
Reviewed in the United States on September 29, 2023
These tires and wheels are great . They weigh half again more than the original Carlisle . Save your original thrust washers , you may need them to get the snap ring on the shaft since the shaft lengths do vary a bit on the tractor . Originals are thinner than the ones that come with new wheels . I needed these because I have a sloped yard and running perpendicular to the slope stresses the wheel hubs at point the attach to the rims , which ultimately breaks the hub off the rim at the weld on the original Husqvarna wheels These have an extra thickness of steel at the rim connection to the hub . Very impressed with the wheel design and the tires are beefy . Can’t beat the price , I paid more to have a new wheel put on to one old tire , locally , than these wheels WITH tires cost .
petey
Reviewed in Canada on October 25, 2023
very happy to find these after shopping and check with many dealers these appeared like magic on amazon.I had searched many times before with no success on amazon then the tires appeared .OH BE JOYFUL It was a 2 month search .
Melissa Calverley
Reviewed in the United States on October 24, 2023
Initial Review: Tires only lasted 3 months with minimal use. One of the front tires fell off. I initially thought the c-clip had come loose, but it was the bearings that failed. As pictured, the bearing housing came apart and the tire is no longer functional. These are way too expensive to break after mowing a flat field of grass 6 times. It’s past the return window, so I’m stuck with an unusable mower that I can’t get back to the barn.Updated Review: The company quickly responded and sent out replacement tires at no cost. So far so good! The tires are working well. Very impressed with the customer service.
JKS
Reviewed in Canada on January 19, 2021
It does what I wanted.
Recommended Products
$127.39
$ 58 .99 $58.99