Your cart is empty.
Your cart is empty.Product Description
How we got our start
maXpeedingrods was established with the development concept of "success derived from devotion and happiness comes from sharing". This concept informs our contribution to the global tuning industry and racing culture with our excellent product, service and prices
3rd Row Seat Bracket Kit for Jeep Wrangler JK 4 Door 2007-2018
Spring Pad: M8 White Zinc Plated
Shoulder bolt: M10*1.5M10*1.5
Shoulder bolt: M8*1.25M8*1.25
Hexagon Nylon Lock Nut: M10*1.5
Hexagon socket head screws: M8*1.25*25
- Step 1 – Remove Liner and Mark Holes
- Step 2 – Drill Holes
- Step 3 – Spray Holes with Anti-rust Oil
- Step 4 – Install the Brackets
- Step 5 – Cut and Install the Carpet
- Step 6 – Install Third Row Seat（Not Include Seats）
- Need to Drill
- Easy to Install
- Highly Durable
- Increase Space
- The third-row seat bracket, not include seats, allows the installation of a 3rd row seat, help you increase a row of seats，increase the number of passengers of your car.
D. LeBeau
Reviewed in the United States on July 17, 2024
Ok so I'm pretty mechanically inclined and this is not an hour long install. I followed some instructions that I found online for the higher priced kit and everything is identical but after much measuring and marking, I decided to go with a more common sense approach.I clipped the seat brackets onto the third row seat I would be using and placed the entire thing in the back of the Jeep, placed it exactly where it needed to be and then marked where the brackets sat and each of the mounting holes. Then removed the seat and used that as a guide.After trial and error, this is what I suggest on installation. Put your bracket in after you mark where it needs to be and use a center punch to mark one hole on either end of the bracket. Then remove the bracket and drill those two holes, I used a 1/4" bit, then went up to a 3/8" and then to a 1/2" which is the size you'll need for the nutserts. The bolt is an M8 by the way.Once I drilled those two holes and put in the nutserts (recommend a pneumatic or electric nutsert gun, you can do it manually but the floor pan is so thick it's very difficult). I bolted the bracket to the floor using those two holes. Then I used my 3/8" drill bit and drilled out the remaining holes using the bracket itself as a guide. The holes in the bracket are 3/8" so this works perfectly. Then remove the bracket, drill out the holes to 1/2" and proceed to install the rest of your nutserts.This is the easiest way to install these. Using a template you'll find that due to the structural obstructions under the floor, if the holes aren't literally almost perfect then once you go to screw down your bracket you'll have at least one screw that doesn't line up. Using the bracket itself as a template keeps this from happening.I hope this helps someone in the future.
Kindle Customer
Reviewed in the United States on March 17, 2021
They work great. Look great and are half the price of the competitor. I just wished they came with a template for install. Had to make my own, but no worries. Still a good product
Esmeralda S Reyes
Reviewed in the United States on March 13, 2021
Was able to install easy but the nutserts provided are cheap. One bracket was warped but I installed it anyways. Other than that everything was great. I have the nutsert tool so it was easy to install them.
Jenna
Reviewed in the United States on February 3, 2021
Perfect addition to our Jeep Wrangler Unlimited. Now giving us the ability to be able to take our whole family of 7 places. Easy to install in just a few hours.
Customer
Reviewed in the United States on February 20, 2021
Very good product. This is made of good materials and powder coated nicely.
Badfastbusa
Reviewed in the United States on October 18, 2021
Had to grind some of the rear seat latch so it would release to tumble forward.
Recommended Products
$143.88
$ 60 .99 $60.99