Your cart is empty.
Your cart is empty. Description:
- Power Supply Input: DC 5V/2A
- Input Signal Format: RGBS, RGBHV, YPbPr
- Input RGBS Format: 15kHz, 24kHz, 31kHz horizontal frequency signal automatic scanning
- Input RGBHV Format: 31k horizontal frequency signal
- Input YPbPr Format: 480i-60, 576i-50, 1080i-50, 1080i-60, 480p-60, 576p-60, 720p-50, 720p-60, 1080p-50, 1080p-60 automatic identification
- Output signal: VGA: 640 * 480,800 * 600,1024 * 768,1360 * 768
- True digital 24-bit A / D converter for real 16.7 million color conversion.
- Supports ALL types of VGA monitors (CRT, LCD, PDP, projector, etc.)
MENU CONTROL
- “MENU” open OSD menu, and enter.
- “UP” up and increase.
- “DOWN/AUTO” down and reduce.
-Press this key: auto scan CGA/EGA signal
-Press this key over 5 second and release: reset system
(this operation is invalid when you open OSD menu)
- “SW” switch input signal Ypbpr/RGBS/RGBHV.
(this operation is invalid when you open OSD menu)
-“Clamp sp” and “Clamp” please don’t adjust this button, except the monitor has black item or picture discoloration.
- For more functions control, please look at OSD to operate.
NOTE: Soldering required. Installation manual is NOT included!!
Package Includes:
1 x Converter board
1 x power supply wire
Customer
Reviewed in Sweden on March 29, 2025
Fungerar jätte bra! Lite svår att förstå sig på i början. Men det finns guider på youtube. Man kan med lätthet få bilden precis vart du vill ha den på skärmen. Perfekt om du skall använda ett gammalt pcb med en ny lcd skärm. Men även bra att ha om du skall installera en 60 in 1 eller pandoras box.
Darren Ford
Reviewed in the United States on March 20, 2025
Awesome product. Was getting a signal not found on my Dell monitor on my Ms Pac-Man machine, installed this and now it works perfectly
Jesse
Reviewed in the United States on March 17, 2025
First note: The language defaults to Chinese. I believe there are instructions that will walk you through changing the language to English.If your goal is to output CGA/EGA displays to this device from a computer, this alone will probably not do it. My source device was a laptop with CGA output. In my case, I had to use the Necroware MCE adapter in conjunction with this board. Once I had this combination I was able to use the CGA computer on any display.
Andrew
Reviewed in the United States on January 29, 2025
The conversation board works great. Would definitely recommend it if you are into messing with arcades.
Dave Schmidt
Reviewed in Canada on January 24, 2025
great
Lee&ChrisStudley
Reviewed in the United States on April 5, 2025
It worked well. MGA was a bit fuzzy usable.
Lee Michael
Reviewed in the United States on December 25, 2024
I am an amateur at repairing electronics and used this on an old arcade game to replace the original glass tube monitor. It was fairly easy to connect and set up although I did watch a helpful video on YouTube about setting it up.
Mike
Reviewed in the United States on December 17, 2024
Worked for 3 months and then crapped out.From day one it flickered, I thought it was my machine. I bought another on from a different seller on Amazon and it is perfect. The picture is better and no flickers.
CAZALY Nicolas
Reviewed in France on October 15, 2024
Un ESP en plus, un fw gbs-control et a vous les scanline et les modifs pour profiter de vos vieilles consoles et ordinateurs du siècle dernier ;)
Maurizio
Reviewed in Italy on April 22, 2024
Qualità buona, semplice e con un menu per le regolazioni del caso.
Jeff
Reviewed in the United States on July 11, 2021
First off, I always disregard when people say get an "official" Gonbes. It's getting increasingly hard to find an "official"(whatever that means anyways) version of these converters. As far as I know I've only ever used 1 legit version, and have about 4-5 other "fakes" currently running video output in some of the machines here at work that I service. I don't even remember where I found an official one direct from Gonbes themselves(maybe here, maybe Al.iexpress?) Anyhow, after fidgeting in the on-screen menus and adjusting the clamp settings these typically do great. The menu language usually needs changed from Chinese to English as well. This time around though I was having a lot of jittering on the screen so I soldered a resistor into place between the board video output and the Gonbes sync connection which took care of that problem for good. I believe I used a 1kOhm resistor.Looks and plays great to me, little to no lag as far as I can tell!
Eric Hazen
Reviewed in the United States on June 14, 2021
Used it to debug a set of Galaga boards for a friend using an old 4:3 VGA monitor. Worked great. Initially the picture jiggled a bit, but after I soldered a wire onto the vertical sync (see photo) on the video board and attached it to VS (the yellow wire on the supplied cable) everything works perfectly.The default setting of Chinese is a bit annoying. The seller should include some instructions on how to change it.
Marco L.
Reviewed in Mexico on November 4, 2021
Le conecté un Playstation 2 por componente,Funciona muy bien.La alternativa es comprar esos adaptadores PS2 a HDMI, pero no fue mi caso por qué eso requiere que tengas un monitor que soporte 15khz por HDMI, de lo contrario te saldrá "out of range"
Recommended Products
