Your cart is empty.
Your cart is empty.starfish1370
Reviewed in the United States on March 8, 2025
This fit perfectly my LG Washer Model # WM2801HWA even though it is not on the list. I do "HIGHLY RECOMMEND" purchasing a Washer Inner/Outer Tub Spring Expansion Tool to make install easy. Item arrived next day. No leaks.
John Rickard
Reviewed in the United States on September 13, 2024
Fits perfect on my LG washer. Ordered one direct from LG and it did not fit even though they confirmed model number. This one did the job and was half the price. Install was easy with the spring expansion tool. Easy to follow videos on YouTube.
Mr Fish
Reviewed in the United States on August 6, 2024
YouTube is your best place for all the instructional videos. Fits and works as expected. If it’s difficult to install, then you are probably doing something incorrectly.
Matthew
Reviewed in the United States on July 16, 2024
As noted in an earlier review, it came without the drain hole cut out. This required some extra work with a quarter size drill bit and using my soldering iron to burn the rubber out and widen the hole enough. I purchased the recommended tool for removing the rings and 100% was worth the few extra dollars. A big piece of advice I can offer is to use some petroleum jelly in the gap of the rubber that goes on the inside. I had my wife lube it up and it slid right on there. That was after spending an hour or so cursing at it. Wear gloves when taking the washer apart and DO NOT, I REPEAT DO NOT try to clean the inner outside lip of the drum. It's razor sharp and will cut like a knife.
rdean
Reviewed in the United States on March 3, 2024
Value
John Overton
Reviewed in the United States on January 10, 2024
The gasket fits perfectly.
Pat Johnston
Reviewed in the United States on April 3, 2024
When you go to install the seal on the front of washer and it seems like it doesn’t fit it’s because you need to pull it out more. We thought we had it right but it didn’t work then pulled it out more and it fit perfectly and was able to get the wire spring on to hold it in place also took about 2 hours. Video said 20 minutes.
LBCLE
Reviewed in the United States on April 12, 2024
Be aware, drain hole was not cut and without some type of heated knife, it’s not easy to cut cleanly. There was excess material at the production seams that had to be removed, again, difficult to execute cleanly.Would not recommend.
Recommended Products