Your cart is empty.
Your cart is empty.Product Description
FlowTech Features
Leak-Proof Nozzle:
FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
Cold Nozzle Change:
With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
High-Flow Characteristics:
Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
All-Metal Design:
FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. This hotend is rated at 300°C temperature.
What's in the box
- 1x FlowTech Heater Core
- 1x Copper Thermal Adapter
- 1x FlowTech Brass Plated 0.4mm Nozzle
- 2x Titanium Mounting Screws
- 1x Silicon Sock
Fits: Creality Ender 3 V3 KE
Patrick
Reviewed in the United States on March 5, 2025
Best upgrade for a 3d printer I have made. No more glob of death and more consistent prints. super easy install and minimal re-tuning of filaments.
Joe
Reviewed in the United States on March 4, 2025
It was plug and play as advertised. This is the second one I've purchased. I will put one in every printer I buy. No clogs, high quality build. It takes like 5 minutes to install.I put one on my Ender 3 v3 KE and one on my Sovol SV08.
chris Watson
Reviewed in the United States on March 2, 2025
This is hands down the BEST value for an upgrade to the KE or SE.My Bambu A1 has been outpacing the Ender on success rates since I got it last month, and the way the KE is printing right now with no tuning after installing this on the first filament to breech its pursed 0.4 Microswiss orifice; and having had almost every known issue with my KE, (the inconsistent heating, nozzle clogs, internal bowden tube clogs, even the break clogging with carbon fiber so bad I had to burn it out at 290C!) I can safely say I should have gotten this on day one and avoided a lot of troubleshooting the wrong parts. This really should be the factory part and just add it to the price. I would never have even given the stock one a chance had I known how poorly it heated, how often it just completely filled the extruder with filament, warping the bowden, and then melting its own thermistor wires lol - Just get this. Get it.My Ender 3 KE was a lemon and the board went out, runout, motors, head clogged. No matter what I did I had issues. I have effectively replaced 2/3 of my machine and I know this thing very well now.I would say just the nozzle has cost me in terms of filament 10 or more Kg and some at $45 a roll like the carbon fiber. Add in the nozzles I stocked up on like a fool, and the ones it ruined and I'm out another $50. Top that off with lost print time and constant failing prints, and I would say just dont get this printer if I'm being honest.Truth be told I spent well over $700 on the ender, fixes, filaments, nozzles, and lost time on prints and a few good lost sales too! - I got a bambu A1 (NOT the mini) with an AMS Lite under $400 and I have had one failure in 3 weeks. If I had gotten the A1 from the get go I would be better off. Lesson learned with Creality. By the way they finally sent replacement parts, but I needed it to run for sales and it failed me even with spending my own money up front due to severe and constant faulty parts.
X
Reviewed in the Netherlands on March 10, 2025
X
Jake
Reviewed in the United States on February 18, 2025
Heats up faster than your mamma watching the pool boy on a Sunday afternoon!
Mary G
Reviewed in the United States on January 26, 2025
Full disclosure - we do not have a 3D printer. Husband wants to build a handheld 3D pen using this device, where he can manually craft things out of plastic filament. It's well-made, using quality materials.
christi
Reviewed in the United States on September 10, 2024
Recommend spending the extra money for this brand. I haven’t had anymore clogging issues since installing !
Chema Mateos
Reviewed in Spain on July 27, 2024
Después de colocar este HotEnd, made in USA, se nota la calidad de fabricación.Cambiado en un tiempo aproximado de unos 20 minutos, ya que sacar uno de los dos tornillos que sujetaban el anterior Hotend se complicó. Una vez cambiado y realizado varias pruebas, puedo asegurar que hay un antes y un después en la calidad de las piezas impresas.Es una buena compra, junto con la boquilla de 0.6mm que da más velocidad a los trabajos.
Leo Reyes
Reviewed in the United States on July 23, 2024
Had a blob form that ruined my stock hot end. This one was a great replacement, and easy except the lead from the hot end and thermistor that always gets damaged when removing the stock glue.
Kevin A.
Reviewed in Germany on December 30, 2024
Super produkt
MJV
Reviewed in the United States on December 20, 2024
The media could not be loaded.
Chris
Reviewed in the United Kingdom on November 2, 2024
I had no problems fitting this to my KE having watched a couple of videos on YouTube. Work's really well and have had no problems. Print quality has been excellent.
suire
Reviewed in France on November 11, 2024
Bon matériel, facile à monter, mais penser à changer aussi le radiateur, car le montage des vis titane sur l'ancien ce n'est pas top.
Recommended Products