Your cart is empty.
Your cart is empty.Product Description
MICTUNING Motorcycle Mirrors - Bar End Rear View Mirrors
Let's Enjoy A Safe and Happy Ride!
Pls Check the Size Carefully Before You Place the Order
Essential Equipment Joyful Ride
James cole
Reviewed in the United States on March 14, 2025
You get what you pay for broken didn't even get a ride out of them
Samuel
Reviewed in Canada on July 18, 2024
Cochonnerie pour 50$. Est trop petit donc avec l’ajustement au bout ça ne tiens à peu près pas, toujours loose.Je recommande l’achat de matériel plus haut de gamme, étant donner qu’il s’agit d’un élément de sécurité
luis arturo felix
Reviewed in Mexico on June 26, 2024
muy deviles se aflojan
shellshocked
Reviewed in the United States on June 17, 2024
I needed a low profile mirror for my dual sport motorcycle. The previous owner had mounted one like this and I broke it in a crash so needed a replacement. I mounted one of these (comes with two mirrors) on my hand guard. It worked great, is out of the way and actually works well as a mirror. The swivel is tight so these do not move around and stay put where you adjust them. These come two to a package so when I inevitably break this one I have a spare. The mirror and mounting hardware are surprisingly high quality parts - not sure how they sell them so cheap but I am not complaining. Just a note - these come with mounts to put on the end of the handlebars. I had a different mount to screw them on my hand guards as shown in the picture - this is not part of the kit.
Justin otterholt
Reviewed in the United States on May 19, 2024
Just install these mirrors on my Suzuki hayabusa, the quality of these mirrors surpasses what you would expect for something of this price point. They work well and they are nice and sturdy.They are meant for hollow handlebars, but they also work for threaded handlebars. You just have to remove the adapters and Source your own bolts because the bolts that come with the mirrors are too long to use with a threaded handlebar.But other than that, installation was easy, took about 15 minutes to figure out a different bolt to use and then get them on. I haven't test ridden the bike yet but I sat on the bike and concluded that the field of view is much better than your standard mirrors.So I would recommend these for those who want a more sleek look and would like better rear visibility at a budget price.
Cole
Reviewed in the United States on December 4, 2024
These mirrors look amazing on my bike, but I have them in my bag as a reserve because I'm a newer rider and don't trust myself with bar end mirrors yet. Also if you are a newer rider and want these mirrors use something else, bar ends are only there to satisfy legal requirements. They don't provide much visibility behind you and only look cool. They are quite sturdy, fit well, and an excellent value so if you don't care about seeing what's really behind you go nuts. Still a quality product and would recommend, but be aware of your surroundings while on a motorcycle, but buy "proper" mirrors
Cameron
Reviewed in the United States on November 20, 2024
I bought these mirrors about 3-4 months ago and just in that shirt time they've already gave me a few problems such asThey vibrate and not visble while on the highway-false advertising on their behalfThe bolt comes undone and just leaves the mirror loose and the mirror just falls off.The bar ends will squeeze your throttle tube and cause your throttle to stick which is a danger until you get it just right or you get multiple washers to secure it and not have a DIY cruise control.Overall it was a huge letdown for the 60 something I paid for it. I personally recommend these if you are just needing something for now and you don't have a lot to spend on mirrors
Andy M.
Reviewed in the United States on October 24, 2024
Decent looking mirrors that fit my old Ducati, mounting quickly and easily. No problems with vibration or movement at speed...this is a good item.
Jared Torbert
Reviewed in the United States on September 12, 2023
I bought this set to replace a CGR Arrow glass and frame that decided to yeet itself off my bike on the way to work one day. Quality feels similar however there are quality differences that you can tell after comparing to my other mirror which is still CGR. Time will tell how it holds up but for $20 vs $100+ for the CGR replacement I can't say I'm unhappy so far. Plus it matches close enough for me and my daily ride, and I have a spare in case.Update: After riding a few weeks with these there are some things noting. Firstly the view from the mirror is a very zoomed view not wide like the more expensive brands. It almost forces you to do more head checks, even though you should be doing them anyways. Secondly the vibration from my Z900 at revs will make the picture in the mirror fuzzy as it's being distorted from that. The CGR does not do that. I ended up switching where I had it to the other bar because of the view and fuzzy picture (I use my left mirror more). Overall for $20 does the job but still mid average quality.
Mauroboy
Reviewed in the United States on June 17, 2022
I first looked for these mirrors not because of their quality but because of their price, I wanted to see how those mirrors looked on my motorcycle before buying premium quality ones that exceed 150usd. I read the comments and I expected many problems, and eventually I had them, since on the first day of use, what many said happened, that it loosens from the handlebar very quickly, but to solve that issue I used an ultra strong adhesive to put it around of the handlebar in the mirror holder and with that it solves the problem, there is no way that the mirror will loosen from the mirror holder with that adhesive, and another thing that I use is a thread lock for the screws, I think that with these two things the mirrors are going to stay in place for a long time, and I can tell you that it is a fully functional and guaranteed workaround, especially when my Ducati Monster 937 feels a lot of vibration on the handlebars, I leave photos. Regarding the quality of the product for the price, it is expected to be regular, I do not expect much and it is like that, the quality adjusts to exactly what you are paying, it is a cheap Chinese product but it totally fulfills the aesthetic function, because the one who installs a mirror of that type so small and below the handlebar, you will not be looking for quality in vision. So according to what I expected for the price, I am totally satisfied with the purchase and the product and within its category of cheap Chinese product I give it 5 stars.
david glenn
Reviewed in the United Kingdom on September 11, 2021
After reading the reviews I wasn't sure if I should get theses or not. The only problem I have with them is installing them in the handle bars could be a bit better as I had to use molegrips to hold it to stop it spinning while tightening it up to the max. I can see clear as day through them they're brilliant and worth the money so far. I may upgrade in the future but for now they will stay on for as long as they last.
Kam
Reviewed in the United Kingdom on August 23, 2021
Easy to install mirrors, as long as they are installed correctly they do not move and offer great visibility, I fitted them to a 2017 Yamaha MT-09They feel of good quality and can be adjusted to many angles, they make my bike look a lot better then the oem mirrors.One of the mirrors arrived with a bit of an issue with the paint on them but the seller sent out a replacement promptly.Very happy with the mirrors so far, I’ve ridden with them for about 200-250 miles at slow speeds and 70mph plus and had no problem with them moving or vibrating, I’d suggest setting the mirrors to your perfect visibility then tight everything up.Will update in future if any issues.
Valentin Kulemin
Reviewed in the United Kingdom on May 22, 2020
Easy to install and use. Unfortunately there's a design flaw in the ball fixture which connects the mirror itself to the arm. The ball is made of (I assume) stainless steel and is connected to the arm by just squeezing the steel to form around the square aluminium arm - the squeezed steel can easily get bent out of shape and make the arm wobble in its socket. I would suggest loosening the two bolts on the mirror frame which grip the ball when making adjustments and then re-tightening them once you're done, so that you don't put too much stress on the ball/arm joint when adjusting.
Recommended Products