Your cart is empty.
Your cart is empty.Derek Vivio
Reviewed in the United States on September 20, 2024
Did not fit right at all. The center top bravket would not go in slot until i grinded it down. Bolt did not tighten all the way and stripped out. Bottom two bolts did not line up until i used a jack to jack it into alignment. Absolutely terrible
Adam
Reviewed in Canada on July 22, 2024
Hell of a time installing it. Nothing lined up and it's lighter, cheaper and thinner than the original.
Dee
Reviewed in the United States on May 20, 2024
While this bar did fit, it took some persuasion to make it line up. After loosely putting in the top bolt, the two bottom bolts did not directly line up. I was able to get one started. The other required a floor jack and a screwdriver to move it up and line it with the hole. If you are looking for a simple direct replacement, this may not be it. But looks good for the price.
anthony
Reviewed in the United States on October 29, 2024
I ordered this item thinking some of the other reviews were just happenstance. Not the case. The top mount tab is welded at the wrong angle. The guard itself is entirely out of spec as far as mounting. I had to use a large crescent wrench to manipulate the tab, bend the guard itself on each side to close the 3 inch gap between the mounting plate and the bike, and use a ratchet strap to close the remaining 2 inch gap on the left side. Came with bolts but no nuts. If you want a cheap guard and are willing to physically exhaust yourself, this is for you. If you want something that fits out the box, just spend the extra money. All that being said, I got it in and it looks good…
Greg M.
Reviewed in the United States on September 17, 2023
Fit on my 2008 electra glide with no issues. Looks good
charleskincaide
Reviewed in the United States on May 1, 2023
Love this engine guard looks great on my bikeEasy to install good price
Kindle Customer
Reviewed in the United States on October 5, 2023
The bracket on top is curved and you cannot line up the bolt to bolt into place. On the original guard this bracket is straight.Because of this curve, even if I was able to start the bolt the bottom would have been 8 to ten inches forward of their anchor points.The good news is this thing seemed to have a very good finish to it and it came well packaged and in a timely manner.
K. Elliott
Reviewed in the United States on September 10, 2022
Really like the look of the guard, and it can also be used as a highway peg. So for value, it can't be beat.Unfortunately for me the front mounting tab and the left tube was bent.The tab was easy enough to bend back in place with a vice.The left tube was a different story. It was about an inch and a half off, and I couldn't force it into place by hand. The plus is the tubing is definitely just as tough as OEM.I had to use a jack to force it into position so I could put a bolt in it. Just hoping the stress and vibration doesn't snap the bolt.Also, run a bolt through the welded on nut and back out before installing. Im pretty sure someone else mentioned paint in the threads, and mine was the same way.But now that its on. Im really happy with it.
Bsowden
Reviewed in the United States on July 22, 2022
Great quality and super easy 3 bolt install! I love how low profile, yet functional it is with the built in foot rests!
Recommended Products