Your cart is empty.
Your cart is empty.Backed by superior materials and rigorous testing, MOOG® sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Aaron Abramski
Reviewed in the United States on February 18, 2025
I bought these to replace the bushings on the front stabilizer bar of a 70 Olds 442 with 15/16 stab bar. They are the correct bushings but since Moog has gone to manufacturing in China, the hole diameter is a bit too narrow. The gap on the side of the bushing is a bit too wide to collapse enough for the sway bar brackets to align properly to get the bolts started. I attempted to use a small block of wood and a bottle jack but since the hole is too narrow, the gap pf the bushing will only allow one of the two bolts to get started as the gap causes one side of the bracket to cant slightly, just enough to prevent the second bolt from starting. So, I used a sanding drum on a Dremel and took off approximately one sixteenth to one eighth of an inch of material inside the hole of both bushings. This allowed the bushings to collapse enough to get the bolts for the brackets started and torqued down. If you're purchasing the bushings for a 15/16 sway bar, you almost certainly will need to massage the hole of the bushings a bit to fit properly. Other than that, the bushings are as I've come to expect from Moog, but four stars because they're not ready to install out of the box.
pdiz
Reviewed in the United States on March 31, 2024
Amazon states this is a frequently returned item. Well, I think the reason for that has nothing to do with item quality, but because the part isn't correct. Let me explain. Ordered for a 1970 Dodge Coronet and Amazon says part is correct, as does the MOOG web site; however, be careful of manufacturer changes, especially if your car was built earlier or later in the year. Turns out, mine uses '69-style end-link bushings, which is entirely different. Five stars because it's MOOG and Amazon offers the best prices, but unfortunately, have to return.
Fernando H.
Reviewed in Mexico on February 4, 2024
Resultó excelente para la barra estabilizadora de mi Nova 74, instalado sin ningún problema.
Buck
Reviewed in the United States on October 17, 2024
Taller than stock bushing on my 79 Nova front sway bar, but they compress once you tighten them dow. Work great so far, no squeaks or issues
scott
Reviewed in Canada on August 4, 2023
Had to drill them out to fit the sway bar.
Dave D.
Reviewed in Canada on May 29, 2022
Fit perfectly !
Mom to 2
Reviewed in the United States on April 29, 2022
They looked too tall before tightening the bolts, but they compressed nicely into the brackets. Install them without lubricant per the instructions.
Bruce Forbes
Reviewed in Canada on August 5, 2020
Good quality and proper fit
Client d'
Reviewed in Canada on January 22, 2019
Fit perfect
Patricia Barrett
Reviewed in the United States on August 5, 2016
Very tight fit looks like better quality than oem
Timothy Wise
Reviewed in the United States on August 12, 2015
This says it fits a 1977 nova but it does not. I have a 7/8" diameter sway bar and these bushings are to large to fit correctly!
cj
Reviewed in the United States on December 17, 2014
Great product at a very reasonable cost. Would recommend to friends.
Fred Palmer
Reviewed in the United States on October 28, 2014
Quality at the best prce
Recommended Products
