Your cart is empty.
Your cart is empty. Trolling motor prop 2262658 compatible with Minn Kota MKP-34 prop and nut kit E part fit for Minn Kota props MKP 38 & MKP 33 weedless wedge 2 prop(part number 233160/1865018)
Package Include
3 × trolling motor prop pin
Compatibility
Motor prop shear pins compatible with minn kota props MKP 38 & MKP 33 weedless wedge 2 prop(part number 233160/1865018).
Product size:
Diameter of the prop drive pin: 3/16"
Length of the prop drive pin: 1"
Easy Installation
Replacement for minn kota shear pin is easy to install, easy installation without additional tools. Please wear gloves to protect your hands during installation.
Warm Tips
Greased it up before install the trolling motor prop pin to be take care of any rust or any new potential rust.
Danny Stampley
Reviewed in the United States on February 26, 2025
Works great
Customer
Reviewed in the United States on February 20, 2025
Looks well made, but its diameter was slightly larger than 3/16" so initially it did not fit on my Minn Kota trolling motor. It was approximate 0.1885" instead of 0.1875" measured with my caliper. Luckily I had the tools to make the diameter smaller. If it had fit right out of the box I would have given it 5 stars.
Tim Toomey
Reviewed in the United States on September 28, 2024
I always keep one one the boat as a spare! Great quality!
gregory parson
Reviewed in the United States on September 24, 2024
Pins like original for Ultrex motor.
Happy Rooster
Reviewed in the United States on June 20, 2024
Ordered for a 24v Terrova. Pin was so tight I had to grease it and tap it in with a hammer. All good, it fits well in the prop, just didn't like using a hammer. At least it won't fall out into the lake again.
Sam B.
Reviewed in the United States on March 10, 2024
Although these are for the Minnkota lineup, I purchased these for a Garmin Force. Perfect replacement!!
JEFF VINES
Reviewed in the United States on February 11, 2024
It worked
BrushUserz
Reviewed in the United States on April 11, 2024
ZERO STARS. Ordered 5 packs of 3 shaft pins each (for a desired total of 15), received instead 4 packs of 3 (for a total of 12). I needed 15, so Shuisen shorted us. >>Some money lost.THEN, trying to use the shaft pins on the Minn Kota RipTide 112, ALL of the pins turned out to be oversized! They do not fit the shaft pin hole in the MinnKota driveshaft -- not even close. They are a full size step larger diameter (maybe someone at Shuisen picked rod stock out of the wrong bin that day?), and so are useless to us. >>All the money wasted.Going to return the packs today. I guess the shipping cost is lost. ZERO STARS.
Recommended Products
$126.28
$ 59 .99 $59.99