Your cart is empty.
Your cart is empty.Product Description
Recordable MP3 Sound Board
The basic functions are as follows:
✔ 5 buttons to control music play / pause, adjust volume. With loop, jog play, single-pass playback
✔ Can be connected to the computer through the MINI-USB interface, as a U disk, download MP3 songs directly from the computer.
✔ SPI Flash and TF are used to store MP3 songs, choose one of the two. When both exist, the TF card will play first.
✔ Onboard SPI Flash can realize related functions, high quality and low cost.
✔ With 3W external power amplifier.
Note:
- The songs or record format must be MP3.
- TF card is not included.
- The supporting speaker is used as a prompt sound effect speaker.
If you want to play singing with higher sound quality, you can change a better speaker.
Package included
- 1 X Sounds Recording Module
- 1 X Empty Battery Case
- 1 X PIR Sensor Module
- 1 X Speaker
PIR motion sensor
This is a PIR motion sensor, it has 2.54mm terminal port. You can rotate the resistor to adjust the sensitivity.
The potentiometer adjusts the sensing time, the sensing distance is about 1-5 meters
- The size is 30mm*36mm
Battery case
- This battery case needs 3 pcs AA batteries, but batteries are not included.
- It has a terminal, plug and play, you don't need to weld.
Voice recording board
This recording module can realize MP3 music playback, support TF card, support USB download, small size, light weight, simple operation, can be connected to the human body infrared sensor module.
You can remove the motion sensor, just use the "play" button to control on and off. Or soldering your own button to the "play" pin.
There are two ways to storage songs:
- 1. This sound player kit comes with an alarm audio, so it will keep repeating. This audio is copied on the chip, if you want to change it, you need to use a USB data cable to connect this board to your computer, you can delete the old audio and copy a new MP3 music when you see a new disk, but your music must less than 4MB.
- 2. If the song is more than 4MB, you need copy the MP3 songs to TF card, then insert the TF card into the card slot of the board. When you use this way, your music will be played first after the TF card is inserted. TF card supports up to 8GB, but it is not included.
- We provide technology support.
What can you do with this sound recording module?
DIY Music box
DIY Welcomer
DIY Creative gifts.
DIY MP3 player
Diane B
Reviewed in the United States on March 7, 2025
My daughter is a pediatric nurse in a hospital. She and her coworkers make displays on their unit for different holidays. They used this to play a portion of a song as patients their family came up to the nurses station. It was a big hit!!! Great sound and quality for the price. She said it was easily to set up.
D. Kauble
Reviewed in the United States on March 11, 2025
Worked as it should. It was easy to program. I like that it actually sounds like a music box and not like some electronic junk. And the volume and clarity is pretty good, as well
MichelleKD
Reviewed in the United States on January 25, 2025
Loved the value with all the necessary parts being attached for my needs. The sound quality is crisp and clear. Memory capacity is top notch and so easy to use connect the cord and pull up the memory device insert your own music sounds etc. Great quality I'd recommend forsure
Thomas Parker
Reviewed in the United States on September 10, 2024
This item worked okay once I figured it out. It did not come with any instructions on how to connect the Motion sensor. The pins on the main circuit board were marked but not the same on the motion sensor board. The colors of the wires were also different than than the picture on the listing. It was not until I looked at some pictures in the other reviews that I was able to figure it out. Also the sensitivity adjustment does not seem to work.Edit: Once I figured it out it worked great, but then it quit working completely a few days after the 30 day return window.
Customer
Reviewed in the United States on March 7, 2024
The media could not be loaded.
kprop
Reviewed in Canada on February 8, 2024
couldn't get this one working. Not by transferring a 4mb mp3 file nor by storing the same file on a 8GB TF card. Never worked even the storage was successful and could be played back on the PC. Speaker only worked at the beginning giving an alarm sound but later stopped doing even that. No instructions on anything, even the setup is simple but no confirmed idea what went wrong or is faulty. Seems I lost that money.
LJ Mosky
Reviewed in the United States on February 25, 2024
I wanted a an audio board with motion control for a project I’m working on. This board is great because you can swap out the speakers and the motion detection if you want to. One thing to keep in mind however: there is a misprint on the board. The motion detection markings are flipped. All you have to do is plug the motion detection module in upside down and it works like a charm. If you install the motion detection the way the instructions tell you to, it loops forever.The first picture show the module with a 5 W speaker, which is much louder than the .5 W that ships with the product. The second picture shows the module with a Doppler motion sensor.It’s a cute little audio board that you can customize without knowing any kind of programming language.
Mallory
Reviewed in the United States on November 21, 2024
I love how easy it was to get sound loaded onto this. It functioned as hoped and made a great addition to my halloween animatronics. The batteries lasted for multiple nights and still going. Great value, great item and I will buy again if needed!
Xavquez
Reviewed in the United States on September 24, 2023
Plugged into my PC and the LED turned on, but my PC didn't recognize it and it started smoking. Not quite sure how as I had it hooked up correctly but the 8002A amplifier IC burned out too. Cheap product. Didn't come with any instructions. Didn't come with the 3 AA batteries it needs. No wiring diagram. I could desolder and replace the 8002A amplifier IC but by the time I buy the $2 plus S&H, I might as well just buy a new one with prime free shipping. Overall, I don't recommend.
Review guy
Reviewed in Canada on July 24, 2023
It took some guesswork and reading some other reviews to figure out how to get this to work, but once I did it worked as advertised. It comes as a few components that need to be assembled, but there are no directions as to how to assemble it, and the plugs could go in 2 different ways on each connector. At the least, a wiring diagram showing which way to plug in the various components to the board would be appreciated. I tried to find instructions off the vendor site but was unsuccessful in that.I did not test the storage card, I just used the onboard storage which is adequate for my intended use. I was able to load MP3 files to it without problem and they played back fine.
Paul & Family
Reviewed in Canada on October 6, 2023
Look at the photo.. that's essentially what you get. A plastic bag (not even a static bag) and a few components. You get no instructions, no labels, no directions at all. You are expected to just know what everything does, how it wires up and how it connects to your computer to swap out the mp3 files.Unfortunately, if you look at other reviews - you'll see that this has proven dangerous for some. If wired up incorrectly, you risk burning up a mosfet at best or starting a fire at worse.... Finding documentation has proven impossible as well.I have managed to figure out how to load music, how to test the board. It does work well. The components pair together to let you make some cool little experiments... but it's sort of pointless as a kit without direction of what to use it for and how to use it.I'll be disecting for parts and using different components on different projects. Mostly I just need the speaker, player and amplifier to use on a raspberry Pi Pico project that has limited capacity on it's own.
Recommended Products