Your cart is empty.
Your cart is empty. Part Number:NFR0013 /GM23B/FL-GM22B/FL-GM22B-T
Compatible with the following models:
1988-1997 Chevy C/K trucks, GAS ONLY
1988-1997 GMC C/K trucks, GAS ONLY
Fits 1988-1997 C/K series trucks including, but not limited to full size blazer
Package included:
(Same as pictures show!!!)
1 * Fuel supply line – runs from tank to filter
1 * Fuel return line – runs from tank to front engine flex line
1 * Vapor emission line – runs from tank to charcoal canister
1 * Nylon to fuel injection & hose barb to quick disconnect fittings
1 * Fuel filter
)
Terry
Reviewed in the United States on September 13, 2024
This set is said to replace all three of the fuel lines, but it doesn't, at least in the case of a 1989 Chevy K1500. The vapor line works fine. The fuel supply line from the tank to the filter does not have threads on both ends, but the connection at the tank and at the filter are threaded. The fuel return line requires a bend so that it can be threaded into the throttle body. That connection comes straight and without the factory bend it interferes with other components such that it can't be used --- and good luck finding this for the 1988 and 1989 model year trucks. If you thought you'd found your fuel line replacement solution in this kit --- you haven't.
Customer
Reviewed in the United States on December 5, 2024
There was no bends in the throttle body fittings
Customer
Reviewed in the United States on November 10, 2024
Required trimming down for my standard cab longbed. Worked well but had to buy a pair of special pliers to install the supplied one time use clamps (look up StepLess clamp tool). I used heat gun to help remove, trim and reinstall the fittings to the vinyl lines. If your not changing you sending unit you will probably need replacement o-rings for the sending unit connection they are not supplied.
Recommended Products
