Shopping Cart

Your cart is empty.

Your cart is empty.

Nilight 2 Pin DT Connectors 16AWG 6 Kits Male and Female Electrical Connector Waterproof Plug Play w/Heat Shrink Butt Terminals for Automotive Cars Truck Motorcycle Marine Boats

Free shipping on orders over $29.99

$11.39

$ 5 .99 $5.99

In Stock

About this item

  • High Quality : Nilight 2 pin connector is made of PA66 nylon and 16 AWG tinned copper wire, which has a high certain thermo stability, waterproof, dustproof ,durable wear-resisting and safe. The wires are pure copper instead of aluminum wire cad copper. They are tin-plated, anti corrosion and oxidation.
  • Electrical Wire Connectors: Nilight 2 Pin male and female connectors are already assembled. The wires were already crimped to the connector pins, they are sealed and soldered so that additional actions are not needed. Just connect your target wires and connect the male and female connectors together.
  • Easy to install: The connectors are applied with the rubber seal to make it better dustproof and waterproof. The buckle design ensures that the contact is accurately and completely inserted into the shell and prevents it from slipping out of the connector plug. The wire connectors automotive can be easily removed when needed.
  • Wide Applications: The 2pin DT Connectors are widely used for Motorcycles, Scooters, Cars, Trucks, Quad bikes, Trikes, Caravans, Marine,Boats etc. Great for connecting LED light bar, LED strips, LED wall-washers, LED underground light, LED belt light, curtain light, twinkle light and so on. The connection is reliable and safe, not loose, and light in weight.
  • Package Includes: 6 male ends and 6 female ends. A total of 6 pair male/female connectors. 24PCS Heat Shrink Butt Connectors.



Product Description

Nilight 2PIN 16 AWG DT Connectors Sets

Nilight 2 PIN DT WIRE CONNECTORS

  • Wire Gauge:16AWG; Cable length: 13 cm (5.5 inches)
  • 2 Pin DT wire connectors has a high certain thermostability, waterproof, dustproof ,durable wear-resisting and safe.
  • 16 AWG male & female 2 pin connector with super sealed waterproof good quality rubber seal.
  • It most use for marine, car, truck, boat, motorcycle, and other wire connections.
  • Package Includes: 6 Kits 2Pin Waterproof Connector; 24 PCS Heat Shrink Butt Connectors.
Nilight 2PIN 16 AWG DT Connectors Sets

Features

Tight waterproof design and good quality rubber seal

IP68 WATERPROOF

  • Waterproof rating:IP68
  • Added a tail cover that uses ultrasonic welding technology to securely secure the sealed plug and terminal to the connector housing.
  • Tight waterproof design and good quality rubber seal can protect your wires from being soaked by water to make it better dustproof and waterproof.
DT connectors can be used safely in the temperature range from -40°F to +120°F

Temperature Protection

  • DT connectors are made of high-quality materials and have certain thermal stability, making the connectors durable wear and weather resistance.
  • It can be used safely in the temperature range from -40°F to +120°F.

Features

Premium Tinned Copper

Premium Tinned Copper

  • Wire Gauge: 16AWG
  • Different from other connectors, our wire connectors made of high-quality tinned copper-more flexibility, hight conductivity,low resistance and anti-oxidation,anti-aging,anti-corrosion.
More Flexible Plastic

More Flexible Plastic

  • DT connector is made of high quality nylon material with strong flexibility and long service life.
  • The seal plug and terminal are securely secured in the connector housing using ultrasonic welding technology to ensure a reliable and stable connection.

Wide Applications

Wide Applications

Compatibility: Used for Motorcycle, Scooter, Car, Truck, Quad bike, Trike, Caravan, Marine, Jet ski, Boats and etc.


John C. Perine
Reviewed in the United States on August 5, 2024
Good connection and ready for fast solder.
Rlvenn
Reviewed in the United States on December 12, 2024
work great
ruiner
Reviewed in the United States on August 24, 2023
I bought this kit to connect my new LED lights on my truck. They worked very well and allow for quick connect/disconnects as needed.
ecellingsworth
Reviewed in the United States on March 17, 2014
I used this to tap into an empty socket of a fuse box that is designed for low profile mini type fuses. Though this fuse tap is designed for ATM (mini) fuse sockets, it will fit the low profile sockets. Of course, the low profile fuses will not fit into its sockets so I had to buy some normal ATM (mini) fuses to put in the fuse tap. No big deal. This is still much cheaper and easier to find than a fuse tape specifically designed for low profile sockets. The crimp connector attached to the end is a nice bonus. It makes hooking up your circuit a snap.
ljwj42801
Reviewed in the United States on June 8, 2012
I purchased this to hard wire a radar detector and it was quite simple to do even with my limited knowlege of wiring. The only issue I ran into was that my car has flush mount mini-fuses and at first glance this did not seem to be the right product. After a quick phone call, I found out that I can still use this mini-plug in the flush mount fuse panel but I had to use regular mini fuses in the add-a-fuse holder. Also, check with the manufacturer of your detector or device to find out which amperage fuse to put in the new circuit.
A. Diamond
Reviewed in the United States on January 28, 2012
The item works as expected...BUT...Let me start from the beginning, I went to hardwire a radar detector and had originally order the normal size fuse add a circuit. That item arrived with spare spade connectors and and a bunch of spare fuses. This was great until I popped the fuse panel on my truck and realized it took the mini low-profile fuses. Uh oh. So I ordered this item. It arrived, with nothing else. The picture shows fuses, didn't come with any. Problem? Well sort of, because my vehicle takes the low profile mini fuses which do NOT fit in this add a circuit, since the contacts do not extend down. Back to the auto parts store for some some regular mini fuses to replace the one I pulled, plus one for the new circuit. In the end it works as expected, but I wanted to point out to people what they should expect so they aren't running back and forth to the store for different fuses.
Nookie Blossumgang, III
Reviewed in the United States on June 11, 2011
I used this on a 2000 Toyota Camry to add in a so I didn't have the cigarette lighter power adapter hanging out with its long cord getting in the way of my head unit/radio. in addition, my car's cabin looks a whole lot cleaner and tidier now.this worked perfectly for my purposes!it's well built and solid. Unlike the , this kit/piece, however, does NOT come with extra fuses at all. Not a big deal, but if you bought the ATO Littelfuse version, you may want to consider that. I had to go to a local auto parts store and pick up a five pack of 10A fuses for a couple bucks because of this.as always, Amazon Prime really pays for itself with the free two-day shipping. in addition, my local stores didn't even have anything like this, so Amazon really comes through!and if you need an easy way to add a cigarette lighter powered device, buy the and simply cut the clamp ends off, strip the red/positive wire lead so as to insert the copper into the clamp of THIS Bussman fuse, and then crimp it (pliers work fine). finally, strip the black/ground wire and secure it to something like a bolt on your car that is grounded/connected to the car frame/chassis.I used the above RoadPro adapter for my setup.
William Smittle
Reviewed in the United States on December 24, 2011
These things come with a selection of fuses from the manufacture. I ordered three. All had been cut open at the seams, the fuses removed, and closed with cellophane tape. Re the device itself, it is well made and functional, just remember to buy your fuses too. Not so good of a deal here without them. Amazon, I'm disappointed in you for the first time.